1 1

UNDER THE HOOD

Royal Enfield Front Brake Hose Kit 1 (ABS → Front Master Cylinder) – Classic 350 Reborn (J-Series) & Bullet 350 (J-Series) – Part No. KAB00217/B

Royal Enfield Front Brake Hose Kit 1 (ABS → Front Master Cylinder) – Classic 350 Reborn (J-Series) & Bullet 350 (J-Series) – Part No. KAB00217/B

Rs. 2,700.00
Rs. 2,765.00 Rs. 2,700.00
Sale Sold out
Shipping calculated at checkout.
Important Order Policy
Please order only after confirming the part number, model, variant, year, side, connector type and compatibility. All orders are non-cancellable once placed. Correctly shipped spare parts are not eligible for return, exchange or refund due to wrong selection, wrong diagnosis, fitment mismatch, mechanic recommendation or change of mind. Electrical/electronic items are additionally non-returnable once opened, installed, plugged in, tested or used. Wrong item, damaged item or missing item claims require a complete unboxing video within 24 hours. Read full Return & Warranty Policy

Keep your braking sharp and ABS alerts away with the genuine Royal Enfield Brake Hose Kit 1 – KAB00217/B. This OEM line connects the ABS modulator to the front master cylinder, maintaining factory hydraulic pressure and lever feel. Because it’s the exact hose specified by Royal Enfield, you get the correct length, banjo angles, internal diameter and crimp quality—so there’s no weeping at crush washers, no routing fouls, and no spongy feel common to generic hoses.

Fitment is confirmed for the Classic 350 Reborn (J-Series, BS6/Euro 5) and Bullet 350 (J-Series, BS6/Euro 5) via parts fiche and authorised dealer listings. If your stock hose is corroded, kinked after a fall, or triggering ABS warnings during bleeding, replace it with this OEM kit for a plug-and-play fix. Always use fresh copper washers and bleed the front circuit thoroughly after installation. 

Key Features

  • Genuine OEM Royal Enfield Brake Hose Kit 1 (ABS → Front M/C) — KAB00217/B. Correct length & banjo orientation for stock routing; DOT-rated construction.

  • Preserves ABS modulation and factory lever feel; reduces leak/air ingress risk.

  • Direct replacement for Classic 350 Reborn & Bullet 350 (J-Series)—no mods. 

  • Ideal after crash repairs, hose corrosion, or spongy-lever complaints.

  • Ships in Royal Enfield Genuine Parts packaging.

Compatibility Table 

Model (Region) Engine / Platform BS/Euro Stage Years Status
Classic 350 Reborn (J-Series) 349cc J1D SOHC BS6 / Euro 5 2021 → present
Bullet 350 (J-Series) 349cc J1D SOHC BS6 / Euro 5 2023 → present



FAQs

Q1. Is KAB00217/B an OEM hose?
Yes. It appears in the fiche distributor as “BRAKE HOSE KIT 1 (ABS TO FRONT M/C)” and is stocked by authorised dealers. 

Q2. Which bikes is it confirmed for?
Classic 350 Reborn (J-Series) and Bullet 350 (J-Series). Hunter 350 is not confirmed for this exact code—check VIN. 

Q3. What else should I replace during installation?
Always fit new copper crush washers and bleed the front brake thoroughly.

Q4. Will a generic braided line work?
Aftermarket lines may change length/angles and can disturb ABS performance. This OEM hose maintains factory geometry and modulation. (Dealer pages list this specific OEM kit.)

Verify Fitment on Official Brand Portals

For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.

Royal Enfield Official Spares Portal

Hero MotoCorp Official eCatalogue

View full details