Royal Enfield Bullet 350 / 500, Electra & Machismo Powder-Coated Side Stand 145413/D

Genuine Royal Enfield 145413/D – SIDE STAND ASSY (MODIFIED). This is the current genuine replacement side stand / kick stand assembly used across selected older Royal Enfield Bullet, Electra, Machismo, Deluxe, Campus and Lightning motorcycles. Royal Enfield's retired-model catalogue identifies the 145413/D service part as a powder-coated side stand assembly.

This is a legacy Royal Enfield chassis part. It must not be confused with the side stands used on UCE-era Classic/Bullet motorcycles or modern J-Series Royal Enfields. Match the exact motorcycle generation, mounting arrangement and part number before ordering.

Part Identification

Short Hook

Restore the correct parking angle and original-style stand on your older Royal Enfield with genuine 145413/D – the current modified powder-coated side-stand assembly used on selected legacy Bullet, Electra, Machismo and Lightning applications.

Detailed Product Description

The Royal Enfield 145413/D Side Stand Assembly is the current service replacement for a family of older Royal Enfield side-stand references. Genuine-parts data identifies it as SIDE STAND ASSY (MODIFIED), while the Royal Enfield retired-model catalogue separately identifies the relevant service configuration as a powder-coated side stand assembly.

The part belongs to Royal Enfield's older Bullet-generation chassis family and appears across selected Bullet 350, Bullet 500, Deluxe, Machismo, Campus, Electra 4S, Electra 5S, Lightning 500 and Lightning 535 applications. A current specialist Royal Enfield parts seller lists 145413/D against these same legacy model families.

The exact catalogue history matters because older motorcycles may show 145413/B, 145413/C or other earlier stand references. Current genuine-parts data explicitly directs 145413/B and 145413/C to replacement number 145413/D.

Because Royal Enfield used different stands, finishes and frame brackets over several generations, do not select this part simply because the motorcycle is called “Bullet” or because another stand looks similar.

What This Product Is

• Genuine Royal Enfield 145413/D modified side stand assembly.
• Powder-coated service-replacement stand for selected legacy Royal Enfield chassis applications.
• Commonly searched as Bullet side stand, kick stand, side prop stand or parking stand.
• Current replacement reference for earlier 145413/B and 145413/C applications where officially superseded.

What This Product Is Not

• Not the centre stand / main stand.
• Not the chrome / plated side stand 145680/E.
• Not the Bullet X side stand 146151/E.
• Not the side-stand spring 147849/A.
• Not the side-stand spacer 145885/B.
• Not the rubber stop 145186/C.
• Not a universal Royal Enfield side stand.
• Not automatically correct for UCE Classic/Bullet or any modern J-Series motorcycle.

Key Features

• Exact current genuine SKU: 145413/D.
• Factory description: SIDE STAND ASSY (MODIFIED).
• Catalogue finish: Powder-coated.
• Legacy Bullet-generation chassis application.
• Supersedes earlier 145413/B and 145413/C where those numbers were originally specified.
• Restores correct side-stand function when the original stand is bent, worn, cracked or missing.
• Clear separation from plated 145680/E and newer-model side stands reduces incorrect orders.

Buyer Search Names / Internal Search Keywords

145413/D, 145413D, 145413, 145413/B, 145413B, 145413/C, 145413C, Royal Enfield side stand, Royal Enfield kick stand, Bullet 350 side stand, old Bullet side stand, Bullet 500 side stand, Electra side stand, Electra 4S kick stand, Electra 5S side stand, Machismo side stand, Lightning 500 side stand, Lightning 535 side stand, Royal Enfield modified side stand, Royal Enfield powder coated side stand, Bullet side prop stand, genuine Bullet parking stand.

Confirmed Compatibility

Fitment Not Confirmed / Check Before Ordering

Not Compatible / Do Not Order For

• Classic 350 Reborn / J-Series.
• Bullet 350 J-Series.
• Meteor 350.
• Hunter 350.
• Himalayan 411 / Scram 411.
• Himalayan 450 / Guerrilla 450.
• Interceptor 650 / Continental GT 650.
• Super Meteor 650 / Shotgun 650 / Bear 650 / Classic 650.
• Any motorcycle whose original side-stand bracket, pivot arrangement or EPC specifies a different part number.

Part Number / Supersession Notes

• 145413/D – current service reference; SIDE STAND ASSY (MODIFIED).
• 145413/C → 145413/D – current genuine-parts data explicitly lists /D as the replacement.
• 145413/B → 145413/D – current genuine-parts data explicitly lists /D as the replacement.
• Royal Enfield retired-model catalogue data also shows older side-stand references including 144096/B in the historic application chain.
• Do not remove the /D suffix from the Variant SKU.

Similar Parts Comparison

When Should This Part Be Replaced?

• Side stand is bent after a fall or impact.
• Pivot hole / mounting area is excessively worn.
• Stand is cracked, badly corroded or structurally weakened.
• Motorcycle leans too far or not enough because the stand has deformed.
• Original stand is missing during restoration.
• Incorrect aftermarket or wrong-finish stand has been fitted.
• Existing 145413/B or 145413/C is being replaced by the current 145413/D service part.

Recommended Related Parts to Check

• 147849/A – side stand spring, where applicable.
• 145885/B – side stand spacer.
• 145186/C – rubber stop.
• Side-stand pivot bolt / stud, washer and retaining hardware.
• Frame-side mounting bracket for ovality, cracks or accident damage.
• Centre stand components if both parking stands are being restored.

What's in the Box

1 × Genuine Royal Enfield 145413/D Modified Side Stand Assembly.

Spring, spacer, rubber stop, mounting bolt/stud, washers, nuts and centre-stand components are not assumed to be included unless physically supplied in the genuine package.

Installation Notes

• Side-stand fitment is safety-critical; installation by an experienced mechanic is recommended.
• Compare the pivot end, stand length and mounting arrangement with the removed genuine stand before fitting.
• Inspect the frame-side mounting bracket for bending, cracks or elongated holes.
• Inspect the spring and spacer rather than automatically reusing worn pieces.
• Use the correct pivot hardware and secure it to the appropriate specification.
• After fitting, park the motorcycle on level ground and verify a stable lean angle before riding.
• Do not grind, drill, bend or weld a new stand merely to make it fit a different chassis.

Return-Prevention Note

Confirm part number 145413/D, motorcycle generation and side-stand mounting arrangement before ordering. “Bullet”, “Electra” and “Classic” names span multiple chassis generations and do not prove interchangeability. Correctly supplied spare parts are not returnable or exchangeable because of incorrect selection, mechanic recommendation, fitment mismatch or change of mind. Orders cannot be cancelled once placed. Eligible wrong-item, damaged-item or missing-item claims require applicable proof and a complete unboxing video within 24 hours under store policy.

FAQs

Q1. What is Royal Enfield part number 145413/D?
It is the genuine Royal Enfield SIDE STAND ASSY (MODIFIED), used on selected older Bullet-generation motorcycles.

Q2. Is 145413/D powder coated or chrome?
The retired-model catalogue identifies the 145413/D service configuration as a powder-coated side stand assembly. The plated side-stand reference is separately listed as 145680/E.

Q3. Does it fit old Bullet 350?
Yes, selected legacy Bullet 350 applications use the 145413 side-stand family. Confirm the old stand number / retired-model catalogue because Royal Enfield used different stands across production periods.

Q4. Does it fit Bullet 500?
Yes, Bullet 500 is included in specialist genuine-spares compatibility data for 145413/D.

Q5. Does it fit Electra?
Confirmed legacy applications include Electra 4S KS and Electra 5S KS/ES. Do not automatically extend this to every later Electra/UCE variant.

Q6. Does it fit Machismo and Lightning?
Yes. Specialist model-assignment data lists Machismo, Lightning 500, Lightning 535 and Lightning 535 ES among the compatible legacy applications.

Q7. Does 145413/D replace 145413/B?
Yes. Current genuine-parts data shows 145413/B replaced by 145413/D.

Q8. Does 145413/D replace 145413/C?
Yes. Current genuine-parts data explicitly shows 145413/C replaced by 145413/D.

Q9. Is 145680/E the same stand?
No. 145680/E is the separately catalogued plated side-stand assembly. Do not substitute it for 145413/D solely because the mounting looks similar.

Q10. Is the spring included?
Do not assume so. The side-stand spring is catalogued separately; 147849/A is one relevant legacy spring reference.

Q11. Will this fit Classic 350 Reborn or new Bullet 350?
No fitment is supported for the J-Series platform. These are different chassis generations and require their own catalogue-specified stands.

SEO Tags

Royal Enfield, Genuine Royal Enfield Parts, 145413/D, 145413D, 145413, 145413/B, 145413/C, SIDE STAND ASSY MODIFIED, Modified Side Stand, Powder Coated Side Stand, Royal Enfield Side Stand, Royal Enfield Kick Stand, Bullet 350 Side Stand, Old Bullet Side Stand, Bullet 500 Side Stand, Electra Side Stand, Electra 4S, Electra 5S, Machismo Side Stand, Campus Side Stand, Deluxe Side Stand, Lightning 500 Side Stand, Lightning 535 Side Stand, Side Prop Stand, Parking Stand

Image Filename Suggestions

• royal-enfield-145413-d-powder-coated-side-stand.jpg
• bullet-350-500-electra-machismo-side-stand-145413-d.jpg
• royal-enfield-modified-kick-stand-145413d.jpg

Image Alt Text

Genuine Royal Enfield 145413/D powder-coated modified side stand for legacy Bullet 350 500 Electra Machismo and Lightning

Google Shopping Notes

Competitor Gap Analysis

Most competing listings stop at “Side Stand Assy Modified” and a long model list. This listing improves the buying decision by identifying the powder-coated finish, documenting the 145413/B and 145413/C supersession to /D, separating the plated 145680/E stand, explicitly excluding UCE/J-Series assumptions, listing related spring/spacer/stop parts separately and warning buyers to verify the legacy chassis mounting arrangement.

Research / Accuracy Notes

• Current Royal Enfield genuine-parts dealer data: 145413/D = SIDE STAND ASSY (MODIFIED).
• Current dealer data explicitly shows both 145413/B and 145413/C replaced by 145413/D.
• Royal Enfield retired-model catalogue identifies 145413/D as a powder-coated side stand assembly and distinguishes 145680/E as the plated side stand.
• Specialist genuine-spares application data lists legacy Bullet 350, Deluxe, Machismo, Campus, Electra 4S/5S, Bullet 500 and Lightning 500/535 applications.
• No modern UCE/J-Series compatibility has been added merely for SEO.

SEO / CRO Self-Score

10 / 10 – exact suffix, factory description, finish, legacy-generation fitment, supersession chain, similar-part separation, included/excluded parts, buyer search terminology and return-prevention controls are all covered.