Royal Enfield Bullet 350 / Bullet X Genuine RH Grey Fuel Tank Sticker | RAK00214/A

Genuine Royal Enfield Bullet 350 / Bullet X RH Grey Fuel Tank Sticker – RAK00214/A

Royal Enfield Part Number: RAK00214/A

RAK00214/A is the genuine Royal Enfield right-hand fuel tank sticker in Grey used within the older Bullet 350 / Bullet X 350 UCE-era fuel-tank graphics family where this exact service reference is specified.

The exact factory description is STICKER – FUEL TANK RH – GREY.

Buyers may also search for this part as a Bullet 350 tank sticker, Bullet X 350 tank decal, Royal Enfield grey tank sticker, right tank decal, RH petrol tank sticker, Bullet fuel tank graphic, tank logo sticker or genuine Royal Enfield tank decal.

Important: this listing is for one RH / rider's right-side grey fuel-tank sticker only. It is not a pair, not the LH sticker, not a complete fuel tank, and not a rigid metal badge.

Exact OEM Identity

Compatibility – Conservative Exact-Part Approach

The RAK00210–RAK00215 sticker family sits alongside Royal Enfield fuel-tank references used in the Bullet / Bullet X service family. Independent parts sellers directly identify the sibling RAK00212/A RH White sticker for Bullet 350, while the nearby tank reference RAK00219/A is documented for the Bullet X 350 ABS BS4.

However, public catalogues do not expose a complete model-by-model assignment for RAK00214/A. For that reason, this listing deliberately does not claim that every Bullet 350 year, colour or market uses this grey decal.

RH Means Rider's Right Side

RH / Right Hand means the motorcycle's right side when viewed from the rider's normal seated position.

If the damaged sticker is on the rider's left side, the matching LH grey reference is RAK00215/A.

Matching LH Grey Sticker

One quantity of RAK00214/A does not include RAK00215/A. Order both sides separately if both decals require replacement.

Other Colour Variants in the Same Sticker Family

Royal Enfield separately catalogues left- and right-hand tank stickers by colour.

These stickers are colour- and side-specific. Do not substitute a Black or White reference simply because the physical graphic appears similar.

Sticker Colour vs Fuel-Tank Paint Colour

“Grey” describes the sticker / graphic itself.

It does not necessarily mean that the complete fuel tank is painted grey. Royal Enfield can use a grey graphic on a differently painted tank.

When ordering, match:

1. the exact part number,
2. the RH side,
3. the sticker colour,
4. the graphic shape / layout,
5. and the motorcycle's VIN-specific fuel-tank graphics catalogue.

Related Bullet X Fuel-Tank References

The same broad service-data section contains Bullet X-era painted fuel tanks including:

• RAK00217/A – Fuel Tank Assembly with Sticker – Onyx Black
• RAK00218/A – Fuel Tank Assembly with Sticker – Silver / Gun Powder Grey service wording depending catalogue
• RAK00219/A – Fuel Tank Assembly with Sticker – Sapphire Blue

RAK00219/A is independently documented as a Bullet X 350 ABS BS4 fuel tank, supporting the broader Bullet X association of this nearby RAK002xx graphics family.

Do not infer that RAK00214/A automatically belongs to one specific tank colour solely from the numerical sequence. The exact VIN / EPC remains the deciding fitment reference.

Not a Complete Fuel Tank

RAK00214/A is only the RH sticker / decal.

It does not include:

• fuel tank shell,
• fuel cap,
• fuel tap or fuel pump,
• fuel level sender,
• mounting rubbers,
• tank knee pads,
• LH sticker,
• or any other tank graphics.

Not a Metal Badge or 3D Emblem

This product is a factory sticker / decal, not a metal monogram, plastic emblem or raised 3D tank badge.

Older Royal Enfield models use several different tank-branding systems, including:

• flat adhesive decals,
• metal motifs,
• raised 3D badges,
• chrome stickers,
• and pinstripe graphics.

Choose the exact part number rather than selecting by the words “Royal Enfield tank logo.”

Not RAK00296/A Gun Grey Sticker

Royal Enfield also catalogues RAK00296/A – Sticker Fuel Tank – Gun Grey.

That is a separate part number and should not be treated as interchangeable with RAK00214/A.

RAK00214/A = RH Grey sticker.
RAK00296/A = separate Gun Grey sticker reference.

The difference in description and part number matters even if both are informally described as “grey tank stickers.”

Not for New 2023-On Bullet 350 J-Series by Assumption

The current-generation Bullet 350 introduced the newer 349 cc J-series platform with different tank, badge and graphics systems.

This listing does not claim RAK00214/A for the 2023-on J-series Bullet 350.

If the new Bullet's EPC shows another sticker or badge reference, use that current-generation part instead.

Not Automatically for Classic 350

Classic 350 UCE and Classic 350 J-series use their own colour-specific tank graphics and service references.

Do not order RAK00214/A for a Classic 350 simply because it is a Royal Enfield 350 cc motorcycle.

Not Automatically for Electra / Thunderbird

Electra and Thunderbird models use separate tank sticker / motif families. Similar dimensions or colour do not prove genuine catalogue fitment.

When Should the Tank Sticker Be Replaced?

Replacement may be appropriate when:

• the original sticker is scratched,
• the decal has bubbled or lifted at the edges,
• UV exposure has faded the graphic,
• the fuel tank has been repainted,
• the motorcycle is being restored to original specification,
• the existing graphic was removed during dent / paint repair,
• or the VIN-specific Royal Enfield catalogue specifies RAK00214/A.

Application on a Repainted Fuel Tank

RAK00214/A can be installed on a repainted tank only after the paint system has fully cured.

For best results:

• allow paint / clear coat to cure according to the paint manufacturer's instructions,
• ensure the surface is smooth and free from polishing compound, wax or silicone,
• degrease using a paint-safe preparation method,
• remove dust immediately before application,
• check alignment before allowing the adhesive to fully contact the tank,
• and avoid repeated lifting / repositioning once adhesion begins.

Dry-Fit the Position Before Peeling the Backing

Before removing the adhesive backing:

1. compare the new sticker with the old sticker or opposite-side layout,
2. confirm the part number is RAK00214/A,
3. confirm it is RH,
4. confirm the orientation,
5. mark reference points with removable masking tape if required,
6. and inspect the tank paint for defects.

Once the decal adhesive has made full contact, repositioning can damage the sticker.

Surface Preparation

A genuine decal will only perform properly on a correctly prepared surface.

The tank should be:

• clean,
• dry,
• fully cured if repainted,
• free from wax, polish, oil and silicone dressing,
• free from fuel residue,
• and smooth enough for full adhesive contact.

Do not apply over loose paint, rust, peeling clear coat or uncured paint.

Fuel and Chemical Exposure

Fuel spills, aggressive cleaners and strong solvents can damage motorcycle decals over time.

Wipe fuel spills promptly and use paint-safe cleaning products around the tank graphics.

Do not use strong solvent directly on the printed face or adhesive edge.

Colour-Matching Note

A new genuine sticker is produced to the factory specification for the part number, but an old decal on the opposite side may have changed slightly because of:

• UV fading,
• age,
• polishing,
• chemical exposure,
• clear-coat yellowing,
• or previous repainting.

If exact left/right cosmetic symmetry is important on an older motorcycle, consider replacing the matching pair using RAK00214/A RH + RAK00215/A LH.

Should the Sticker Be Clear-Coated?

Do not automatically clear-coat over the sticker.

If the motorcycle is undergoing professional repainting, the painter should follow the applicable paint-system and Royal Enfield-style finishing process. Some clear coats and solvents can react with decal inks or adhesive.

Test compatibility and follow professional paint guidance rather than applying clear coat without verification.

Pack Contents

This listing supplies:

• 1 × Genuine Royal Enfield RH Grey Fuel Tank Sticker
• Part Number: RAK00214/A

Not included: matching LH sticker RAK00215/A, fuel tank, tank badge, fuel cap, pinstripe set, mounting parts or any other decal unless physically packaged with the genuine part.

Before Ordering

Please confirm all of the following:

1. You require the RH / rider's right-side tank sticker.
2. The required sticker colour is Grey.
3. The motorcycle's EPC / old package / existing decal identifies RAK00214/A.
4. You are not looking for RAK00215/A LH Grey.
5. You are not looking for the Black or White sticker references.
6. You are not looking for RAK00296/A or another Gun Grey decal family.
7. If ordering for a Bullet 350, confirm the motorcycle is the applicable older Bullet / Bullet X family rather than assuming fitment to the 2023-on J-series.

Frequently Asked Questions

Q. What is Royal Enfield RAK00214/A?
A. It is the genuine Royal Enfield RH fuel tank sticker in Grey.

Q. Which side is RAK00214/A?
A. RH means the rider's right side.

Q. What is the matching left-side sticker?
A. RAK00215/A is the matching LH Grey tank sticker.

Q. Is this sold as a pair?
A. No. One quantity is one RH sticker only.

Q. Is this a complete fuel tank?
A. No. It is only the adhesive fuel-tank graphic / decal.

Q. Is it a metal Royal Enfield badge?
A. No. It is a flat factory sticker / decal, not a rigid badge or emblem.

Q. Does it fit Bullet 350?
A. The strongest family evidence associates this RAK00210–RAK00215 graphics family with older Bullet / Bullet X applications, and a sibling RH White part is directly sold for Bullet 350. Because a definitive public model assignment for RAK00214/A is not available, verify the exact part number against the motorcycle's VIN/EPC before ordering.

Q. Does it fit Bullet X 350?
A. The adjacent RAK002xx tank family includes independently verified Bullet X 350 ABS BS4 fuel tanks, making Bullet X the strongest model-family association. Exact RAK00214/A confirmation is still recommended.

Q. Does it fit the new J-series Bullet 350?
A. No fitment is claimed. The 2023-on Bullet 350 uses a newer tank and graphics family.

Q. Can I use it on Classic 350?
A. No automatic fitment is claimed. Classic models have separate tank graphics references.

Q. Is Grey the tank colour?
A. Not necessarily. “Grey” is the colour of this sticker / graphic. Always match the exact part number rather than tank paint colour alone.

Q. Can I apply it after repainting my tank?
A. Yes, provided the paint is fully cured and the surface is clean, smooth, dry and free from wax or silicone.

Q. Should I replace both sides together?
A. Not mechanically necessary, but on an aged motorcycle a new RH sticker may look fresher than the old LH sticker. If symmetry matters, replace the matching LH RAK00215/A as well.

Q. Is RAK00214/A the same as RAK00296/A?
A. No. RAK00296/A is a separate Gun Grey tank-sticker reference. Do not substitute based only on the word “grey.”

Q. What if the sticker does not match my old graphic?
A. Stop before installation and recheck the full OEM part number. Royal Enfield uses multiple visually similar tank graphics across models, colours and production periods.

Buyer Search Terms

Royal Enfield RAK00214/A, RAK00214A, RAK00214, Bullet 350 grey tank sticker, Bullet X 350 tank sticker, Royal Enfield fuel tank decal RH, right tank sticker grey, Bullet petrol tank sticker, Bullet 350 tank graphic, Bullet X fuel tank decal, RAK00215/A LH grey sticker, RAK00212/A white tank sticker, RAK00210/A black tank sticker, RAK00296/A Gun Grey sticker, genuine Royal Enfield tank decal.