Royal Enfield Bullet 350 J-Series & Bullet 650 Grab Rail Mounting Sleeve / Spacer – RAU00495/A

Genuine Royal Enfield RAU00495/A is the SLEEVE GRAB RAIL, a rigid mounting sleeve / spacer used in the rear grab-rail mounting stack on applicable Royal Enfield Bullet models.

Part Identification

Short Hook

Restore the correct factory grab-rail mounting stack with genuine Royal Enfield RAU00495/A, the rigid sleeve / spacer used on Bullet 650 and applicable Bullet 350 J-Series configurations.

Detailed Product Description

Royal Enfield RAU00495/A is a rigid sleeve / spacer used between the grab rail and its mounting hardware. It is not a rubber bush and it is not the complete grab rail.

The current Bullet 650 seat EPC identifies base number RAU00495 as SLEEVE GRAB RAIL, position 4, quantity 4. For Bullet 350 J-Series, RAU00495 is retained for applicable India / VIN-specific configurations, but public Euro 5+ seat catalogues also show alternative grab-rail sleeve numbers 1100216 and RAU00105. Therefore Bullet 350 fitment must be checked against the actual motorcycle / EPC before dispatch.

What This Product Is

• Genuine Royal Enfield rigid grab-rail sleeve / spacer.
• Part of the rear seat / grab-rail mounting stack.
• Directly EPC-confirmed on Bullet 650.
• Applicable on certain Bullet 350 J-Series configurations subject to VIN / seat-assembly verification.
• Sold individually unless explicitly stated otherwise.

What This Product Is Not

• Not the complete grab rail.
• Not a rubber support.
• Not a mounting bolt.
• Not 1100216/E.
• Not RAU00105.
• Not 1100215.
• Not RAU00048.

Key Features

• Genuine Royal Enfield OEM mounting component.
• Rigid sleeve / spacer, not rubber.
• Correct factory spacing where RAU00495 is specified.
• Bullet 650 EPC quantity clearly documented.
• Strong differentiation from visually similar Bullet 350 sleeve families.

Buyer Search Names / Internal Search Keywords

RAU00495/A, RAU00495A, RAU00495, Royal Enfield grab rail sleeve, grabrail sleeve, grab rail spacer, grabrail spacer, grab handle sleeve, rear grab rail spacer, Bullet 350 grab rail sleeve, Bullet 350 J-Series grab rail spacer, Bullet 650 grab rail sleeve, Bullet 650 rear grabrail spacer.

Confirmed Compatibility

Fitment Not Confirmed / Check Before Ordering

Not Compatible / Do Not Order For

Part Number / Suffix Notes

Current public Bullet 650 EPC and genuine-part references commonly display the base number RAU00495 with no suffix.

This inventory item has been supplied as RAU00495/A, so this listing preserves the exact /A SKU. However, no blanket claim is made that /A supersedes or is interchangeable with an unsuffixed RAU00495 in every market / VIN.

For dispatch, match the genuine packet, dealer EPC or removed original whenever suffix-level confirmation is available.

Similar Parts Comparison

When Should This Be Replaced?

• Sleeve is missing after grab-rail removal.
• Sleeve is bent, crushed or damaged.
• Incorrect spacer hardware was previously fitted.
• Grab rail sits incorrectly because the original spacing stack is incomplete.
• Rear-end / seat repair requires restoration of factory mounting hardware.

Recommended Related Parts to Check

• RAU00285 – Grab Rail Coated, where applicable.
• H6902024 – M8×40 grab-rail mounting bolt on Bullet 650.
• 1100215 – Rubber Support-Grabrail.
• RAU00048 – Rubber Support Grabrail.
• 1100216/E and RAU00105 on Bullet 350 configurations that use those sleeves.
• Seat and rear body mounting brackets.

What’s in the Box

1 × Genuine Royal Enfield RAU00495/A Grab Rail Sleeve / Spacer

Bullet 650 quantity note: the checked EPC uses 4 sleeves. Shopify quantity 1 means one individual sleeve, not a set of four.

Installation Notes

1. Confirm the exact motorcycle and grab-rail EPC.
2. Compare the sleeve with the removed original component.
3. Check the surrounding rubber supports, bolts and grab rail.
4. Install the sleeve in the correct mounting-stack order.
5. Do not replace a rigid sleeve with a rubber bush or improvised spacer.
6. Tighten grab-rail hardware to the applicable Royal Enfield workshop specification.

Return-Prevention Note / Before You Buy

1. Match RAU00495/A to the genuine packet / inventory item.
2. For Bullet 650, base RAU00495 is directly EPC-confirmed.
3. For Bullet 350 J-Series, verify VIN / EPC because some public catalogues use 1100216 and RAU00105 instead.
4. Do not confuse the rigid sleeve with rubber supports 1100215 or RAU00048.
5. Check required quantity before ordering; Bullet 650 uses 4 in the checked assembly.

Correctly supplied spare parts are not returnable or exchangeable because of incorrect model, trim, market, seat/grabrail assembly, quantity, suffix or component selection, mechanic recommendation, fitment mismatch or change of mind. Orders cannot be cancelled once placed. Eligible wrong-item or damaged-item claims require applicable proof and a complete unboxing video under store policy.

FAQs

What is RAU00495/A?
It is a genuine Royal Enfield rigid grab-rail mounting sleeve / spacer.

Does it fit Bullet 650?
Yes. Base RAU00495 is directly listed in the checked 2026 Bullet 650 seat EPC at position 4, quantity 4.

Does it fit Bullet 350 J-Series?
It is retained for applicable Bullet 350 J-Series configurations, but verify the exact VIN / seat EPC because some public Bullet 350 catalogues use 1100216 and RAU00105 sleeves instead.

How many are required for Bullet 650?
The checked EPC shows quantity 4.

Is this a rubber bush?
No. It is a rigid sleeve / spacer.

Is the bolt included?
No. The Bullet 650 EPC separately lists H6902024 bolts.

Is RAU00495 the same as 1100216/E?
No automatic interchangeability is claimed.

SEO Tags

Royal Enfield, Genuine Royal Enfield Parts, RAU00495/A, RAU00495A, RAU00495, SLEEVE GRAB RAIL, Grab Rail Sleeve, Grabrail Sleeve, Grab Rail Spacer, Grabrail Spacer, Grab Handle Sleeve, Rear Grab Rail Sleeve, Bullet 350 J-Series, New Bullet 350, Bullet 650, Royal Enfield Bullet 350 Parts, Royal Enfield Bullet 650 Parts, Royal Enfield Seat Parts, Royal Enfield Grabrail Parts, OEM Spares

Image Filename Suggestions

• royal-enfield-rau00495-a-grab-rail-sleeve.jpg
• bullet-350-j-series-bullet-650-grabrail-spacer-rau00495-a.jpg
• royal-enfield-bullet-grab-handle-mounting-sleeve-rau00495-a.jpg

Image Alt Text

Genuine Royal Enfield RAU00495/A grab rail mounting sleeve / spacer for Bullet 350 J-Series and Bullet 650 applications

Google Shopping Notes

Competitor Gap Analysis

Most catalogue pages only state “SLEEVE GRAB RAIL.” This listing improves buyer clarity by identifying the part as a rigid spacer, differentiating it from rubber supports and complete grab rails, documenting Bullet 650 quantity 4, retaining the Bullet 350 J-Series application with an honest VIN/EPC warning, and separating RAU00495 from 1100216/E and RAU00105.