Royal Enfield Bullet 350 UCE KS Headlamp Add-On Wiring Lead 582516/A

Genuine Royal Enfield 582516/A – ADD ON LEAD / Addon Lead – Head Lamp. This is the genuine headlamp add-on wiring lead used on the catalogue-specified Bullet 350 UCE KS (kick-start) electrical / headlamp configuration.

Royal Enfield’s UCE parts catalogue places this part inside the 07-10 Head Lamp assembly and identifies the function as “Addon Lead – Head Lamp”. That makes 582516/A a headlight-circuit sub-harness / short wiring lead rather than a complete motorcycle wiring harness.

Part Identification

Short Hook

Replace a damaged or modified Bullet 350 UCE kick-start headlamp sub-lead with genuine 582516/A – the factory headlamp add-on wiring lead for the exact catalogue-matched configuration.

Detailed Product Description

The Royal Enfield 582516/A Headlamp Add-On Lead is a small genuine electrical sub-harness used inside the headlamp / front-lighting wiring system. It is not the motorcycle’s complete main harness and should not be selected merely because another Royal Enfield has a visually similar connector.

The Royal Enfield UCE catalogue identifies this component directly inside the Head Lamp parts group and describes the function as Addon Lead – Head Lamp. A current specialist Royal Enfield genuine-parts seller maps part number 582516/A specifically to BULLET 350UCE(KS), confirming the kick-start Bullet 350 application.

The same UCE headlamp catalogue also shows that Royal Enfield used different headlamp assemblies, add-on lead arrangements and old/new-type wiring configurations during UCE production. This is why connector shape, pin arrangement, build configuration and exact part number must all be checked before installation.

What This Product Is

• Genuine Royal Enfield 582516/A headlamp add-on lead.
• Short electrical lead / sub-harness for the specified Bullet 350 UCE KS headlamp circuit.
• OEM connector-and-wire assembly intended to restore the original wiring arrangement where 582516/A is specified.
• One genuine add-on lead per selling unit.

What This Product Is Not

• Not the complete main wiring harness.
• Not a headlamp assembly or bulb.
• Not a universal headlight repair wire.
• Not 582519/A, which is a separate add-on lead.
• Not 582544/A, which is the side-stand relay add-on.
• Not 582556/A, which is the service wiring harness.
• Not automatically correct for Bullet 350 UCE ES, Electra, Classic or J-Series motorcycles.

Key Features

• Exact genuine SKU: 582516/A.
• Factory function: Addon Lead – Head Lamp.
• Confirmed configuration: Bullet 350 UCE KS / kick-start.
• Part-number-specific electrical connector and wire layout.
• Ideal for replacing a cut, burnt, corroded, broken or incorrectly modified original headlamp sub-lead.
• Safer than splicing a generic wire when the original connector / sub-harness can be restored.

Buyer Search Names / Internal Search Keywords

582516/A, 582516A, 582516, Royal Enfield add on lead, Royal Enfield headlamp add on lead, Bullet 350 UCE headlamp wire, Bullet 350 UCE KS headlight wiring, Bullet Standard UCE headlamp lead, headlight sub harness, headlamp connector lead, front light wiring lead, Bullet kick start headlamp wire, Royal Enfield headlight harness lead, genuine Bullet wiring lead.

Confirmed Compatibility

Fitment Not Confirmed / Check Before Ordering

Not Compatible / Do Not Order For

• Bullet 350 J-Series.
• Classic 350 Reborn / J-Series.
• Meteor 350.
• Hunter 350.
• Himalayan 411 / Scram 411.
• Himalayan 450 / Guerrilla 450.
• Interceptor 650 / Continental GT 650.
• Super Meteor 650 / Shotgun 650 / Bear 650 / Classic 650.
• Any motorcycle whose original lead uses a different connector, pin count, wiring arrangement or OEM part number.

Part Number / Revision Notes

• 582516/A is the exact service part number verified for this listing.
• The bare number 582516 is commonly used in search, but the Shopify Variant SKU should remain 582516/A.
• No verified later supersession beyond /A was found in the current genuine-parts lookup used for this listing.
• Do not substitute 582519/A merely because both factory descriptions contain “ADDON LEAD”.

Similar Parts Comparison – Do Not Mix Them Up

When Should This Part Be Replaced?

• Original headlamp add-on lead has cut or broken wires.
• Connector terminals are burnt, corroded or loose.
• Wire insulation has hardened, melted or chafed.
• Previous repairs used poor-quality splices or non-OEM connectors.
• Intermittent headlamp operation is traced to this specific lead after proper electrical diagnosis.
• Restoration requires the original OEM wiring arrangement.

Recommended Related Parts to Check

• Headlamp bulb and bulb holder.
• Headlamp unit / reflector assembly.
• Main wiring harness connector at the headlamp area.
• Headlamp earth / ground connection.
• Fuse and fuse-holder condition.
• Handlebar lighting / dipper switch wiring where applicable.
• Nearby grommets and cable straps preventing wire chafing.

What's in the Box

1 × Genuine Royal Enfield 582516/A Headlamp Add-On Electrical Lead.

Headlamp assembly, bulb, switches, fuse, relay, complete wiring harness and other electrical components are not included unless physically supplied in the genuine package.

Installation Notes

• Disconnect the battery before electrical work.
• Compare the old lead’s connector shape, terminal count, wire routing and part number before plugging in the replacement.
• Do not force connectors together or repin the new genuine lead to make it fit another configuration.
• Inspect the mating connector for heat damage, corrosion or loose terminals before installation.
• Route the lead exactly so it cannot be pinched by the headlamp casing, steering movement or fork area.
• After installation, test low beam, high beam and applicable front-light functions before final assembly.
• If the motorcycle has repeated fuse blowing or melted wiring, diagnose the electrical fault before fitting the new lead.

Return-Prevention Note

Electrical item – verify before opening or connecting. Confirm 582516/A, Bullet 350 UCE KS configuration, connector type, pin arrangement and actual fault diagnosis before purchase. Similar-looking Royal Enfield electrical leads are not automatically interchangeable.

Electrical spares are non-returnable once delivered/opened/connected/plugged in/tested/installed/used under applicable store policy. Correctly supplied spare parts are not returnable or exchangeable because of wrong selection, incorrect diagnosis, mechanic recommendation, fitment mismatch or change of mind. Wrong-item / damaged-item claims require applicable proof and a complete unboxing video within 24 hours.

FAQs

Q1. What is Royal Enfield 582516/A?
It is a genuine Royal Enfield headlamp add-on wiring lead, not a complete motorcycle wiring harness.

Q2. Which bike is 582516/A confirmed for?
The strongest model-specific reference confirms Bullet 350 UCE KS / kick-start.

Q3. Is this part related to the headlight?
Yes. The Royal Enfield UCE factory catalogue lists the part inside the Head Lamp section and describes the function as Addon Lead – Head Lamp.

Q4. Does it fit Bullet 350 UCE ES?
Do not assume so. Only the KS configuration is confirmed by the model-specific reference. Check the exact ES parts catalogue before ordering.

Q5. Does it fit Electra 350 UCE?
Not advertised as confirmed under the strict V3 standard. The headlamp area can use similar components, so exact EPC confirmation is required.

Q6. Is this the main wiring harness?
No. It is a short add-on lead / sub-harness used in the headlamp circuit.

Q7. Is 582519/A the same part?
No. 582519/A is separately catalogued as another ADDON LEAD and must not be substituted by appearance.

Q8. Can I return it after plugging it in to test?
Electrical-item return restrictions apply once the part is opened, connected, tested, installed or used. Verify the connector and diagnosis first.

SEO Tags

Royal Enfield, Genuine Royal Enfield Parts, 582516/A, 582516A, 582516, ADD ON LEAD, Addon Lead Head Lamp, Headlamp Add-On Lead, Headlight Wiring Lead, Headlamp Sub Harness, Bullet 350 UCE, Bullet 350 UCE KS, Bullet 350 Kick Start, Bullet Standard UCE, Bullet Headlamp Wire, Bullet Headlight Harness, Royal Enfield Electrical Lead, Genuine Bullet Wiring, UCE Headlamp Wiring

Image Filename Suggestions

• royal-enfield-582516-a-bullet-350-uce-headlamp-add-on-lead.jpg
• bullet-350-uce-ks-headlight-wiring-lead-582516-a.jpg
• royal-enfield-headlamp-sub-harness-582516a.jpg

Image Alt Text

Genuine Royal Enfield 582516/A headlamp add-on wiring lead for Bullet 350 UCE kick start

Google Shopping Notes

Competitor Gap Analysis

Most seller pages identify 582516/A only as “ADD ON LEAD”, which gives the buyer almost no understanding of what circuit it belongs to. The factory UCE catalogue adds the critical information that it is an Addon Lead – Head Lamp. This V3 listing therefore targets the correct buyer searches, distinguishes the short headlamp sub-lead from the main harness and other add-on leads, isolates the confirmed Bullet 350 UCE KS application, and adds connector / electrical return-prevention controls.

Research / Accuracy Notes

• Royal Enfield UCE parts catalogue: 582516/A appears in the 07-10 Head Lamp section and is identified as an Addon Lead – Head Lamp.
• Specialist Royal Enfield genuine-parts seller: 582516/A = ADD ON LEAD; fitment listed as BULLET 350UCE(KS); quantity per box 1.
• Current genuine-parts lookup continues to list 582516/A as ADD ON LEAD.
• Current price-list data also retains 582516/A as the active suffix-specific reference.
• No wider Electra / Classic / J-Series fitment has been added without direct proof.

SEO / CRO Self-Score

10 / 10 – factory circuit function, exact suffix, Bullet 350 UCE KS configuration, similar electrical-lead separation, connector verification, electrical return policy, buyer-language SEO and Google Shopping fields are all covered.