Royal Enfield Bullet 350 & Classic 350 Reborn Gold RE Crown Plate Decal RAH00374/A

Restore the small factory gold Royal Enfield marking on a compatible mudguard crown plate with genuine Royal Enfield RAH00374/A. The factory describes this individual adhesive graphic as Decal 2D – Crown Plate RE Gold.

Important: This listing is for one small gold RE decal only. The crown plate, front or rear mudguard, painted parts and larger mudguard graphics are not included. Royal Enfield uses different decal colours for different paint schemes, so confirm the motorcycle variant and crown-plate application before peeling the backing.

What This Product Is

• Genuine Royal Enfield 2D adhesive decal
• Exact part number: RAH00374/A
• Factory description: DECAL 2D – CROWN PLATE RE GOLD
• Gold-colour RE marking for a catalogue-matched crown plate
• Flat adhesive graphic rather than a raised metal badge
• Normal catalogue quantity: one for each listed application

Key Features

• Original factory-style Royal Enfield artwork and gold colour
• Correct small-format graphic for compatible crown-plate applications
• Suitable for replacing a faded, missing, scratched or incorrectly coloured decal
• Helps restore the original visual finish after crown-plate or mudguard repair
• Self-adhesive backing for professional surface application
• Sold as an individual replacement decal

Confirmed Compatibility

Compatibility is colour-scheme and position dependent. A model name alone is not enough because other variants use copper, dark-brown, white, silver or combined mudguard/crown-plate decals.

Not Compatible / Do Not Assume Fitment

• Bullet 350 Black Gold front crown plate, which is catalogued with a copper decal
• Classic 350 Halcyon Green crown plate, which uses a copper-colour reference
• Classic 350 Halcyon Grey crown plate, which uses a dark-brown reference
• Classic 350 Stealth Black applications specifying a matt-silver decal
• Classic 350 Medallion Bronze rear application specifying a copper decal
• Older UCE Bullet or Classic models unless the original parts catalogue specifies RAH00374/A
• Fuel-tank, side-panel, wheel, headlamp, front-mudguard body graphic or rear-mudguard body graphic applications

What You Will Receive

1 × Genuine Royal Enfield Gold RE Crown Plate 2D Decal – RAH00374/A

The supplied item is one adhesive decal. It is not a pair, decal kit or crown-plate assembly.

Not Included

• Crown plate
• Front or rear mudguard
• Large mudguard decals or pinstripes
• Painted trim pieces
• Metal or raised emblem
• Surface cleaner, applicator tools or installation labour

Related Decal References

When Replacement May Be Required

• The original gold RE decal is faded or discoloured
• Edges have lifted after age, washing or previous repair
• The decal was removed during crown-plate repainting
• The crown plate was replaced and supplied without the correct marking
• The existing decal is scratched, torn or incorrectly positioned
• A non-original decal needs to be replaced during factory-style restoration

Technical Details

Pre-Purchase Checklist

1. Confirm the full part number is RAH00374/A.
2. Confirm the required artwork colour is gold, not copper, silver, white or brown.
3. Confirm the damaged item is the small crown-plate decal.
4. Identify whether the decal is required for the front or rear crown-plate application.
5. Check the motorcycle colour scheme against the compatibility table.
6. Compare the original decal shape and orientation before removing the backing.
7. Confirm the crown-plate surface is smooth, correctly painted and undamaged.

Installation Note

• Use a trained bodywork or detailing professional when exact alignment is important.
• Remove old adhesive without damaging the crown-plate paint.
• Clean the application area and allow it to become completely dry.
• Test-position the decal before removing the backing paper.
• Use reference measurements or masking-tape guides to maintain factory alignment.
• Avoid touching the adhesive surface with fingers.
• Apply evenly from one side or the centre outward to minimise trapped air.
• Allow the adhesive to set before washing, polishing or pressure cleaning the area.

Important Return-Prevention Note

Small crown-plate decals can look similar but differ in colour, artwork and intended paint scheme. Confirm RAH00374/A and gold artwork before peeling the backing.

Adhesive decals cannot be returned after the backing has been removed, test-applied, repositioned, folded, creased, contaminated or installed, subject to applicable law and the current store policy.

Record one continuous unboxing video showing the sealed parcel, shipping label, Royal Enfield label and both sides of the decal. Report a wrong, missing or transit-damaged item within 24 hours with the video and original packaging.

Frequently Asked Questions

1. What is RAH00374/A?

It is the genuine Royal Enfield gold RE 2D decal used on compatible mudguard crown plates.

2. Is this a complete crown plate?

No. Only the adhesive decal is supplied.

3. Is it a metal badge?

No. It is a flat 2D adhesive graphic.

4. What colour is the decal?

The RE artwork is gold.

5. How many decals are included?

One individual decal.

6. Does it fit Bullet 350 Standard Black?

Yes, it is catalogued for the front crown plate on the new-generation Standard Black colour scheme.

7. Does it fit Bullet 350 Standard Maroon?

Yes, it is catalogued for the front crown plate on Standard Maroon.

8. Does it fit Bullet 350 Black Gold?

Not for the front crown plate; Black Gold is catalogued with a copper decal.

9. Does it fit Classic 350 Reborn?

Yes, for specifically catalogued colour schemes including Chrome Bronze, Chrome Red and Halcyon Black.

10. Does it fit Halcyon Green?

No for a factory-correct crown-plate match; Halcyon Green uses a copper-colour decal.

11. Does it fit Halcyon Grey?

No for a factory-correct match; Halcyon Grey uses a dark-brown decal.

12. Does it fit Madras Red?

Yes, it is catalogued for selected Madras Red crown-plate applications. Confirm whether the front or rear position is required.

13. Is the mudguard included?

No. Front and rear mudguards are separate parts.

14. Are large mudguard graphics included?

No. This is only the small crown-plate RE decal.

15. Can it be reused after removal?

No. It is intended as a one-time adhesive application.

16. Can it be repositioned during installation?

Repeated repositioning can stretch or weaken the decal and is not recommended.

17. Should it be applied over damaged paint?

No. Repair, smooth and fully cure the crown-plate finish before application.

18. Who should install it?

A bodywork, detailing or decal-installation professional is recommended for factory-style alignment.

19. Can it be returned after peeling?

No. It is not returnable after the backing is removed or the decal is applied.

20. What should be recorded during delivery?

Make a continuous unboxing video showing the sealed parcel, part label and both sides of the decal.