Royal Enfield (Genuine OEM)
Chain Guard (Rear Chain Cover) for Royal Enfield Himalayan 411 / Scram 411 – 587803/C (Replaces 587803/B)
Chain Guard (Rear Chain Cover) for Royal Enfield Himalayan 411 / Scram 411 – 587803/C (Replaces 587803/B)
Couldn't load pickup availability
Please order only after confirming the part number, model, variant, year, side, connector type and compatibility. All orders are non-cancellable once placed. Correctly shipped spare parts are not eligible for return, exchange or refund due to wrong selection, wrong diagnosis, fitment mismatch, mechanic recommendation or change of mind. Electrical/electronic items are additionally non-returnable once opened, installed, plugged in, tested or used. Wrong item, damaged item or missing item claims require a complete unboxing video within 24 hours. Read full Return & Warranty Policy
Royal Enfield 587803/C (search term: 587803) is the genuine OEM chain guard / rear chain cover used on the Himalayan 411 (LS410) and Scram 411. The chain guard protects the chain and rear sprocket area from stones, mud and road debris, and it also helps reduce chain lube fling onto the swingarm, wheel and rider gear.
If your existing chain guard is cracked, broken at the mounting tabs, missing after an off-road fall, or rubbing due to a warped panel, replacing it with the OEM part restores correct clearance and factory-style mounting. This is commonly searched as Himalayan chain guard, Scram 411 chain cover, rear chain guard, and chain protector.
Supersession note: parts catalogs show 587803/B replaced by 587803/C, so 587803/C is the current/updated supply reference.
Before you buy: confirm your bike is Himalayan 411 / Scram 411 and match mounting points by photo before dispatch to prevent wrong orders.
Key Features
- Genuine OEM Royal Enfield part number 587803/C (CHAIN GUARD)
- Replaces older reference 587803/B (superseded to 587803/C)
- Protects chain and rear sprocket area from debris/mud in touring and off-road use
- Helps reduce chain lube fling onto swingarm, rim and riding gear
- OEM fitment: correct mounting alignment and clearance (when matched correctly)
- Direct replacement for cracked/warped/missing chain guard
- Return-prevention: photo verification of mounts supported before dispatch
Compatibility Table
| Model | Platform/Engine | BS/Emission | Years | Status (✅/❓) | Notes/Constraints |
|---|---|---|---|---|---|
| Royal Enfield Himalayan 411 | LS410 | BS3 / BS4 / BS6 (market dependent) | 2016–2023 | ✅ | Listed by multiple sellers as chain guard for Himalayan; confirm by mount photo. Supersession: 587803/B → 587803/C. |
| Royal Enfield Scram 411 | LS410 | BS6 | 2022–2023 | ✅ | Seller listings explicitly mention Scram 411 compatibility; verify by photo if modified. |
| Himalayan 450 | Sherpa 450 | BS6/OBD | 2024+ | ❓ | Not confirmed; different platform. Do not assume cross-fit. |
| Other Royal Enfield models | — | — | — | ❓ | Order only if your EPC/old part number matches 587803/C. |
Variants
No variants.
FAQs
Q1 (Fitment): How do I confirm 587803/C fits my Himalayan/Scram?
Match three things: (1) bike is Himalayan 411 (LS410) or Scram 411, (2) your mounting points/tabs match, and (3) the guard shape aligns without rubbing. If unsure, share photos of the chain guard mounting area before dispatch.
Q2 (Fitment): Will this fit Himalayan 450?
Not confirmed. Himalayan 450 uses different chassis/body parts. Order only if your EPC/VIN or old part number matches 587803/C.
Q3 (Comparison): OEM chain guard vs aftermarket/metal guards?
OEM focuses on factory clearance, weight and mounting alignment. Aftermarket guards can be heavier or alter clearance; they may be fine, but OEM is safest for stock-fit replacement and return prevention.
Q4 (Installation): Any precautions while fitting?
Do not over-tighten into plastic tabs. Ensure all fasteners and spacers are seated and check for rubbing on full suspension movement after installation.
Q5 (Symptoms): What problems does this solve?
Missing chain guard, cracked guard, broken mounting tabs, rubbing/noise from warped guard, excessive chain lube fling onto wheel/swingarm.
Q6 (Returns-prevention): What should I send you before shipping?
Send (1) bike model + year, and (2) a clear photo of your chain guard mounting area (or the old guard). This avoids wrong-fit orders across platforms.
Share
Verify Fitment on Official Brand Portals
Verify Fitment on Official Brand Portals
For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.
Royal Enfield Official Spares Portal
Hero MotoCorp Official eCatalogue
