Royal Enfield Front Mudguard Assembly Brown & Gold Pinstripe RAG01134/A for Classic 350 Medallion Bronze

Royal Enfield RAG01134/A FMG Assembly, Brown & Gold Pinstripe is a genuine Royal Enfield front mudguard / front fender assembly for the All New Classic 350 Medallion Bronze where this exact part number is specified. It is commonly searched as a Classic 350 Medallion Bronze front mudguard, Classic 350 brown front fender, front mudguard with gold pinstripe, Royal Enfield Classic 350 front fender or Classic Reborn front mudguard assembly.

This is a painted exterior body part fitted over the front wheel. It restores the motorcycle’s original front-end appearance when the existing mudguard is scratched, dented, cracked, bent, rusted, paint-damaged, pinstripe-damaged or replaced after a fall/accident. Since this part comes as a colour-specific mudguard assembly with brown finish and gold pinstripe, it is a better factory-style replacement than repainting a generic mudguard and trying to manually recreate the original pinstripe.

Royal Enfield official spares reference identifies RAG01134/A as FMG Assy, Brown & Gold Pinstripe and shows compatibility with All New Classic 350 – Medallion Bronze. This listing is therefore written specifically for the Medallion Bronze Classic 350 application, not as a universal Classic 350 mudguard for every colour.

Use this genuine Royal Enfield front mudguard only where RAG01134/A or RAG01134 is specified in the exact body-panel / front mudguard parts catalogue. This is not a rear mudguard, not a plain unpainted fender, not a sticker-only listing, not a fork brace, not a front stay kit and not a universal Classic/UCE mudguard.

Key Features

• Genuine Royal Enfield spare part
• Part number: RAG01134/A
• Part family reference: RAG01134
• Factory description: FMG Assy, Brown & Gold Pinstripe
• Front mudguard / front fender assembly
• Colour-specific part for All New Classic 350 Medallion Bronze where specified
• Brown finish with gold pinstripe as per part description
• Useful for accident repair, paint damage, dent replacement and restoration
• Helps restore original Classic 350 Medallion Bronze front-end appearance
• Better finish confidence than repainting a plain mudguard or applying local pinstriping

Buyer Search Names / Internal Search Keywords

Customers may also search this part as: Royal Enfield RAG01134/A, RAG01134A, RAG01134, FMG Assy Brown Gold Pinstripe, Classic 350 Medallion Bronze front mudguard, Classic 350 Reborn front fender, All New Classic 350 front mudguard, Classic 350 brown mudguard, front mudguard with gold pinstripe, Royal Enfield front fender assembly.

Verified Compatibility

Important Colour Note

This listing is specifically for the Brown & Gold Pinstripe front mudguard assembly used for All New Classic 350 Medallion Bronze applications. Classic 350 Reborn has multiple colour-specific front mudguard part numbers. Do not order only by motorcycle model; match the colour, pinstripe style and part number before purchase.

Important Fitment Note

This listing is for the front mudguard assembly only. It is not the rear mudguard, not a plain unpainted mudguard, not a sticker-only decal, not a fork stay, not a front fork part, not mounting bolts, not washers, not brackets and not a complete front body kit.

Do not order only by visual appearance. Royal Enfield front mudguards can differ by model generation, colour, pinstripe, mounting points, wheel size, fork setup and variant. Match RAG01134/A in the exact Royal Enfield parts catalogue before ordering.

Do not order for Classic 350 UCE, Classic 500, Standard, Electra, Thunderbird, Meteor 350, Hunter 350, Bullet 350 J-Series, Himalayan 411, Scram 411, Himalayan 450, Guerrilla 450, Interceptor 650, Continental GT 650, Super Meteor 650, Shotgun 650, Bear 650 or Classic 650 unless the exact parts catalogue confirms RAG01134/A for that motorcycle.

RAG01134/A vs Similar Mudguard Parts

When Should This Front Mudguard Be Replaced?

• Front mudguard is dented after a fall or accident
• Brown paint is scratched, chipped, faded or mismatched
• Gold pinstripe is damaged, peeling or incorrectly repaired
• Mudguard is bent and rubbing the tyre
• Mounting area is cracked or damaged
• Old mudguard was poorly repainted or locally pinstriped
• Restoration requires correct Medallion Bronze factory finish
• Workshop needs genuine Royal Enfield painted body part instead of local repaint work

Why This Part Matters

The front mudguard is a highly visible body part on the Classic 350. A wrong shade, incorrect pinstripe or bent mudguard can make the motorcycle look poorly repaired. Using genuine Royal Enfield RAG01134/A helps restore the original Medallion Bronze front-end look with the correct brown and gold pinstripe finish.

Recommended Related Parts to Check

• Front mudguard mounting bolts and washers
• Front fork lower mounting points
• Front wheel alignment and tyre clearance
• Front brake hose / ABS wire routing near mudguard area
• Nearby painted body parts for colour consistency
• Front fork damage after accident or fall

What’s in the Box

1 x Royal Enfield FMG Assembly, Brown & Gold Pinstripe – RAG01134/A

Mounting bolts, washers, fork parts, front wheel, brake parts, decals, brackets and other body components are included only if specifically supplied or shown separately.

Installation Notes

• Confirm colour, pinstripe and part number before installation.
• Handle painted mudguard carefully to avoid scratches during fitting.
• Inspect fork mounting points before installing the new mudguard.
• Do not force-fit if mounting holes do not align naturally.
• Use correct mounting hardware and torque as per service specification.
• After installation, check tyre clearance on both sides.
• Confirm brake hose / ABS wire routing is not disturbed.
• Professional installation is recommended after accident repair.

Return-Prevention Note

Order only if your motorcycle requires RAG01134/A FMG Assy, Brown & Gold Pinstripe. This is a colour- and part-number-specific front mudguard for All New Classic 350 Medallion Bronze and should not be confused with other Classic 350 colour mudguards, rear mudguards or sticker-only listings.

FAQs

What is Royal Enfield RAG01134/A?

RAG01134/A is a genuine Royal Enfield FMG Assy, Brown & Gold Pinstripe, meaning front mudguard assembly in brown with gold pinstripe.

Does RAG01134/A fit Classic 350 Reborn?

Yes, it is for All New Classic 350 / Classic 350 Reborn Medallion Bronze applications where the exact parts catalogue specifies RAG01134/A.

Is this for Medallion Bronze?

Yes. The official compatibility reference shows All New Classic 350 – Medallion Bronze for this part.

Is this front mudguard or rear mudguard?

This is the front mudguard / front fender assembly.

Does it include the gold pinstripe?

Yes. The part description says Brown & Gold Pinstripe.

Does it include bolts or washers?

Mounting hardware is included only if specifically supplied or shown separately. Check package contents before installation.

Can I use this on another Classic 350 colour?

Not recommended. This is a Medallion Bronze brown/gold pinstripe mudguard. Other colours use different part numbers and finishes.

Can I use this on Classic 350 UCE?

No. Do not order for Classic 350 UCE unless the exact parts catalogue confirms RAG01134/A. UCE and Reborn/J-Series body parts are different.

Is this a genuine Royal Enfield part?

Yes. This listing is for genuine Royal Enfield part number RAG01134/A.