Royal Enfield Classic 350 Reborn Hunter 350 & Meteor 350 Black Plastic Front Sprocket Cover – RLQ00005/B

Royal Enfield Genuine Plastic Front Sprocket Cover – RLQ00005/B

Replace a cracked, scratched, broken or missing front sprocket cover on compatible Royal Enfield J-Series 350 motorcycles with this genuine Royal Enfield plastic sprocket-cover component.

Part number RLQ00005/B is the current documented suffix in the RLQ00005 family. The Royal Enfield parts catalogue describes the base part as “SPROCKET COVER COMP-PLASTIC”.

What This Product Is

• Genuine Royal Enfield front / engine sprocket cover
• Exact supplied part number: RLQ00005/B
• Base catalogue number: RLQ00005
• Official catalogue description: Sprocket Cover Comp-Plastic
• Material: Plastic
• Position: Front drive sprocket / gearbox-output area
• Quantity supplied: 1 cover

Confirmed Compatibility

Important Colour / Finish Note

Royal Enfield uses different sprocket-cover finishes according to motorcycle colour and trim specification. Do not order only by model name.

For example, the same parts-book position can use a polished / buffed sprocket cover on other colour schemes:

Not Confirmed / Do Not Assume Compatibility

• New Bullet 350 – colour/configuration-specific covers differ
• Goan Classic 350
• Older UCE Classic 350 / Bullet 350
• Himalayan 411 / Himalayan 450
• Scram 411 / Scram 440
• Guerrilla 450
• Interceptor 650 / Continental GT 650
• Any motorcycle whose VIN-specific parts catalogue specifies a different sprocket cover

Sprocket Cover vs Drive Sprocket

This product is the protective outer cover around the front drive sprocket area. It is not the front drive sprocket itself.

It should also not be confused with the rear chain guard, engine side cover, crankcase cover or complete chain-and-sprocket kit.

Key Features

• Original Royal Enfield genuine spare part
• Factory-style plastic construction
• Correct shape and mounting geometry for the confirmed catalogue applications
• Protects and finishes the front sprocket area
• Suitable for replacement after impact, cracking or cosmetic damage
• Maintains the original appearance of the compatible black-finish engine configuration

What You Will Receive

1 × Royal Enfield genuine plastic front sprocket cover, part number RLQ00005/B.

Not Included Unless Physically Supplied

• Front / countershaft sprocket
• Drive chain
• Rear sprocket
• Mounting screws or bolts
• Spacers or washers
• Engine crankcase cover
• Rear chain guard
• Installation labour

Technical Details

Part-Number / Suffix Note

Royal Enfield parts diagrams commonly display the base number RLQ00005, while genuine supply records also document RLQ00005/B. An earlier RLQ00005/A revision is also known to exist.

This listing is specifically for RLQ00005/B. Do not ignore the suffix or assume that every earlier revision is automatically interchangeable unless confirmed against the current motorcycle-specific parts catalogue.

When Replacement May Be Required

• Original cover is cracked after a fall or impact
• Mounting tabs or bolt holes are damaged
• Cover is deeply scratched or cosmetically damaged
• Original cover is missing after chain or sprocket work
• Motorcycle is being restored to the correct factory engine finish
• An incorrect polished or textured cover has previously been fitted

Inspection Before Installation

If the cover has been damaged around the front sprocket area, inspect the drivetrain before fitting the replacement.

• Check the front sprocket and retaining arrangement.
• Inspect the drive chain for abnormal wear or damage.
• Check for excessive chain lubricant, debris or foreign objects around the sprocket.
• Inspect all cover mounting points and fasteners.
• Confirm the crankcase mounting bosses are not cracked or stripped.

Installation Note

• Confirm the motorcycle and finish specification before installation.
• Clean the front sprocket area before fitting the new cover.
• Compare all mounting points with the removed part.
• Use the correct original fasteners.
• Do not force the plastic cover over misaligned or damaged mounting points.
• Avoid overtightening fasteners into plastic mounting areas.
• Confirm the cover does not contact the chain or sprocket after installation.

Buyer-Focused FAQs

What is RLQ00005/B?
It is a genuine Royal Enfield plastic cover for the front drive-sprocket area.

Does it fit Classic 350 Reborn?
Yes on the confirmed catalogue configuration using RLQ00005, including Stealth Black. Other Classic 350 colour schemes may use a different finish and part number.

Does it fit Meteor 350?
Yes on confirmed configurations including Stellar Black and Fireball Red. Other Meteor colour schemes may use a different sprocket-cover finish.

Does it fit Hunter 350?
Yes it fits Hunter 350

Is this the actual front sprocket?
No. This is the protective plastic cover only.

Is RLQ00041 the same part?
No. RLQ00041 is the buffed / polished sprocket-cover option used on selected alternative colour schemes.

How many covers are supplied?
One.

Are the mounting bolts included?
Do not assume so. Fasteners are only included when physically supplied in the sealed genuine package.

Order Verification & Return Prevention

Before ordering, match the complete part number RLQ00005/B, motorcycle model, engine-cover finish and existing sprocket-cover design.

Plastic covers that have been installed, scratched, drilled, cut, painted, modified, overtightened or damaged during fitting are not eligible for return due to incorrect model, colour or finish selection.

Price Note

Verify the current Indian MRP from the genuine Royal Enfield package before publishing or dispatch. This listing does not state an Indian MRP where a dependable current official price could not be confirmed.