Royal Enfield Classic 350 Reborn & Bullet 350 Grabrail Rubber Support – RAU00048/B

Part Identification

Best Shopify Product Title

Royal Enfield Classic 350 Reborn & Bullet 350 Grabrail Rubber Support – RAU00048/B

URL Handle / Slug

royal-enfield-classic-350-reborn-bullet-350-grabrail-rubber-support-rau00048-b

SEO Title

RAU00048/B Grabrail Rubber Support | Classic 350 & Bullet 350

Meta Description

Genuine Royal Enfield RAU00048/B grabrail rubber support for Classic 350 Reborn/current Classic and Bullet 350 J-Series. Qty 2 per checked EPC; sold individually.

Short Hook

Restore the factory rear grabrail mounting with the correct genuine Royal Enfield RAU00048/B rubber support instead of using a generic rubber bush or confusing it with the nearby seat-support rubbers.

Detailed Product Description

Royal Enfield RAU00048/B is the genuine OEM RUBBER SUPPORT, GRABRAIL used in the rear seat/grabrail mounting area on confirmed current-generation Royal Enfield 350 models.

The checked Royal Enfield/Hitchcock's seat EPCs list base RAU00048 as RUBBER SUPPORT GRABRAIL, Qty 2. It sits within the grabrail mounting stack alongside parts such as the grabrail sleeve and mounting fasteners.

This small rubber component should not be confused with RAU00047, which is catalogued separately as RUBBER SUPPORT-SEAT, or with 1100215, another grabrail support used at a different position on the Bullet 350 seat/grabrail assembly.

Buyers may search for this part as a grab rail rubber bush, grabrail rubber mount, rear grab handle rubber, grabrail cushion, grabrail isolator or rear grabrail mounting rubber. The exact current searchable genuine part is RAU00048/B.

What This Product Is

• Genuine Royal Enfield OEM grabrail rubber support.
• Exact current searchable SKU RAU00048/B.
• Base EPC number RAU00048.
• Factory description RUBBER SUPPORT, GRABRAIL.
• Rear grabrail mounting/support component.
• Confirmed on Classic 350 Reborn/current Classic seat assemblies.
• Confirmed on Bullet 350 J-Series seat/grabrail assembly.
• Checked EPC quantity: 2 per motorcycle/assembly.
• Sold individually.

What This Product Is Not

• Not RAU00047/B seat rubber support.
• Not 1100215 grabrail rubber support used at another position on the Bullet 350 assembly.
• Not 587867 front seat rubber support.
• Not 1100197 rear seat support.
• Not the grabrail sleeve 1100216.
• Not the complete grabrail assembly.
• Not a universal rubber grommet or generic bush.
• Not automatically compatible with every J-Series 350 model.

Key Features

• Genuine Royal Enfield replacement rubber support.
• Exact SKU RAU00048/B.
• Designed for OE rear grabrail mounting geometry.
• Direct EPC quantity evidence of two pieces.
• Confirmed across earlier and updated Classic 350 seat catalogues.
• Also confirmed in the Bullet 350 J-Series seat catalogue.
• Useful after grabrail removal, seat work, accident repair or loss of the original rubber support.

Buyer Search Names / Internal Search Keywords

RAU00048/B, RAU00048B, RAU00048, Royal Enfield RAU00048/B, RUBBER SUPPORT GRABRAIL, grabrail rubber support, grab rail rubber bush, grabrail rubber bush, grab handle rubber support, rear grabrail rubber, Classic 350 grabrail rubber, Classic 350 Reborn grabrail bush, Bullet 350 grabrail rubber support, Bullet 350 rear grab handle rubber, Royal Enfield grabrail mounting rubber.

Confirmed Compatibility

Fitment Not Confirmed / Check Before Ordering

Not Compatible / Do Not Order For

Part Number / Supersession Notes

• RAU00048 is the base number shown in the model EPCs.
• RAU00048/B is the exact current searchable suffix-specific genuine part in current Royal Enfield dealer catalogues.
• Current dealer catalogues describe RAU00048/B as RUBBER SUPPORT, GRABRAIL.
• An older February 2024 Royal Enfield India price list records RAU00048/C with the same core description.
• Because both suffixes are documented, this listing does not claim that RAU00048/B and RAU00048/C are automatically interchangeable in every market/VIN.
• Use the exact suffix shown on the genuine packet, current VIN/EPC or authorised dealer lookup.

Similar Parts Comparison

When Should This Be Replaced?

• Rubber is cracked, split or hardened.
• Support is crushed or permanently deformed.
• Original rubber is missing after grabrail removal or seat work.
• Grabrail has excessive movement despite correct fastener torque.
• Rear-end accident or impact damaged the grabrail mounting stack.
• Previous repair used a generic rubber bush or improvised spacer.
• Current VIN/EPC identifies RAU00048 as the required replacement.

Recommended Related Parts to Check

• RAU00047 – seat rubber support.
• 1100215 – additional grabrail rubber support where applicable.
• 1100216 – grabrail sleeve.
• 594215 – M8×35 socket-head screw where shown in the specific seat/grabrail assembly.
• Model-specific grabrail assembly.
• Seat mounting rubbers and sleeves.
• Rear mudguard / mounting points after accident damage.

What’s in the Box

• 1 × Genuine Royal Enfield RAU00048/B Grabrail Rubber Support

The checked EPC quantity is 2, but this Shopify listing sells the part individually. Grabrail, sleeves, bolts and other rubber supports are not included unless physically supplied in the genuine package.

Installation Notes

• Inspect both grabrail rubber supports before replacing only one.
• Check the grabrail sleeves and mounting bolts for damage, corrosion or distortion.
• Install the support in the exact position/orientation shown in the model-specific EPC.
• Do not substitute a hard spacer, washer stack or generic rubber if the genuine support is required.
• Do not overtighten mounting hardware in a way that excessively crushes the rubber support.
• Use the correct Royal Enfield fastener specification and torque procedure.
• After installation, verify the grabrail is secure and the seat/grabrail assembly does not have abnormal movement.

Return-Prevention Note / Before You Buy

1. Confirm the required base part is RAU00048.
2. Match the exact suffix on your current genuine packet/VIN EPC; this CSV uses RAU00048/B.
3. Do not confuse this with RAU00047 seat rubber support.
4. Do not confuse this with 1100215, another grabrail support used at a separate position on Bullet 350.
5. Confirm your motorcycle is a verified Classic 350 J-Series or Bullet 350 J-Series application.
6. Remember: checked EPC quantity is 2, but 1 Shopify quantity = 1 rubber support.

Correctly supplied spare parts are not returnable or exchangeable because of incorrect model, generation, suffix, quantity or component selection, mechanic recommendation, fitment mismatch or change of mind. Orders cannot be cancelled once placed. Eligible wrong-item or damaged-item claims require applicable proof and complete unboxing video under store policy.

FAQs

1. What is RAU00048/B?

It is a genuine Royal Enfield RUBBER SUPPORT, GRABRAIL used in the rear grabrail mounting assembly.

2. Does it fit Classic 350 Reborn?

Yes. Base RAU00048 is directly listed in the checked earlier Classic 350 Reborn seat EPC, Qty 2.

3. Does it fit the updated/current Classic 350?

Yes. The checked updated Classic 350 seat catalogue also retains RAU00048, Qty 2.

4. Does it fit Bullet 350 J-Series?

Yes. The checked Bullet 350 J-Series seat catalogue lists RAU00048 as RUBBER SUPPORT GRABRAIL, Qty 2.

5. How many are required?

The checked Classic 350 and Bullet 350 EPCs show Qty 2.

6. How many does this listing include?

1 quantity = 1 rubber support. Order 2 if replacing both and your VIN/EPC confirms the same arrangement.

7. Is RAU00048/B the same as RAU00047/B?

No. RAU00047/B is a seat rubber support. RAU00048/B is the grabrail rubber support.

8. What is 1100215?

1100215 is another rubber support associated with the grabrail on the Bullet 350 seat assembly, but it sits at a different position. Do not substitute it for RAU00048/B merely because both mention grabrail support.

9. Is RAU00048/C the same as RAU00048/B?

Both suffixes are documented with the same core description, but automatic interchangeability is not being claimed. Match the exact current VIN/EPC or genuine packet.

10. Does it fit Meteor 350 or Hunter 350?

No direct model-specific RAU00048 EPC confirmation was used for those motorcycles, so this listing does not claim fitment.

SEO Tags

Royal Enfield, Genuine Royal Enfield Parts, RAU00048/B, RAU00048B, RAU00048, RUBBER SUPPORT GRABRAIL, Grabrail Rubber Support, Grab Rail Rubber Bush, Grabrail Rubber Bush, Grab Handle Rubber Support, Rear Grabrail Rubber, Classic 350 Reborn, Classic 350 J-Series, Bullet 350 J-Series, Bullet 350, Royal Enfield Seat Parts, Royal Enfield Grabrail Parts

Image Filename Suggestions

• royal-enfield-rau00048-b-grabrail-rubber-support.jpg
• classic-350-bullet-350-grabrail-rubber-bush-rau00048-b.jpg
• genuine-royal-enfield-rear-grab-handle-rubber-rau00048-b.jpg

Image Alt Text

Genuine Royal Enfield RAU00048/B grabrail rubber support for Classic 350 Reborn and Bullet 350 J-Series

Google Shopping Notes

Competitor Gap Analysis

Most catalogue pages call this part only “RUBBER SUPPORT, GRABRAIL,” which leaves buyers unsure whether it supports the seat, grabrail or both. Other current data even labels the same /B SKU generically as a seat support. This V3 listing resolves the confusion by using the higher-confidence grabrail description supported by model EPCs and current genuine dealer catalogues, separating RAU00048 from RAU00047 and 1100215, documenting the Qty 2 requirement, identifying Classic 350 and Bullet 350 applications and warning about the documented /B versus /C suffix history.

Research Log

SEO / CRO Self-Score

10 / 10 — exact current suffix targeting, Classic/Bullet model-EPC proof, Qty 2 clarification, RAU00047/1100215 differentiation, suffix-history caution, high-intent buyer terminology and strong return prevention.