Royal Enfield Classic 350 Reborn Dark Gunmetal Grey Rear Mudguard with Sticker – RAQ00470/B Genuine OEM

Genuine Classic 350 Reborn Rear Mudguard – Dark Gunmetal Grey

Replace the rear fender of your Royal Enfield Classic 350 Reborn / J-Series with the exact genuine Royal Enfield factory-colour rear mudguard, part RAQ00470/B. This is the Gun Grey Matt (Dark Gunmetal Grey) painted rear mudguard with its factory-specified sticker/graphic arrangement. It is listed for the Dark Gunmetal Grey Classic 350 colourway, including catalogued spoke-wheel and alloy-wheel market variants.

This is a rear mudguard/fender in the rear tail-lamp and number-plate area, not the front mudguard. It is not a universal Classic 350 fender and should not be chosen solely because your motorcycle is a 350cc Royal Enfield. For accident repairs and restorations, matching the exact model generation, paint finish, sticker treatment and OEM part number is essential.

Part Identification

What This Product Is — and Is Not

This is: the genuine model/colour-specific rear mudguard assembly in the factory Gun Grey Matt specification. The OEM description says with sticker, rather than an unpainted bare blank or a separately sold decal.

This is not: the front fender, a generic rear fender for all Classics, the complete rear lighting assembly, a tail-lamp unit, a number-plate holder, a turn-indicator kit, a luggage rack, a rear subframe, or a full set of body panels. These surrounding parts appear separately in OEM illustrated diagrams.

Verified Motorcycle Compatibility

Do not order by displacement alone: a Classic 350 UCE and a Classic 350 Reborn/J-Series are different generations. Confirm the original rear mudguard SKU, tail-lamp mounting geometry and paint/graphic specification.

Models Not Confirmed for RAQ00470/B

• Older Classic 350 UCE / BS3 / BS4
• Classic 500 UCE / EFI
• Bullet 350 UCE, Electra 350, Thunderbird 350 / 500
• New Bullet 350 J-Series (do not assume shared chassis means identical rear mudguard)
• Meteor 350, Hunter 350, Goan Classic 350
• Classic 650, Shotgun 650, Super Meteor 650, Interceptor 650, Continental GT 650
• Himalayan 411 / 450, Scram and Guerrilla models

This list identifies configurations that are not established as factory applications for this exact SKU; it is not a claim that every mounting point physically differs. The product is sold specifically for the documented Dark Gunmetal Grey Classic 350 application.

Paint and Sticker Matching — Critical Before Ordering

Gun Grey Matt / Dark Gunmetal Grey is a specific factory colour. It is not automatically the same as Stealth Black, Signals Marsh Grey, Signals Desert Sand, Halcyon Grey, Chrome Bronze or any custom gunmetal repaint. Gloss level matters just as much as the base shade.

The OEM describes this mudguard as “with sticker”. However, public catalogue descriptions do not establish the exact placement and appearance of every graphic in all markets. Check your existing panel, VIN/colour variant and current Royal Enfield EPC before ordering. A painted factory body component may show minor colour perception differences against older, sun-faded or repainted adjoining panels.

Compare Similar Classic 350 Rear Mudguard Colours

Related references are provided for product identification and colour comparison; they are not claimed interchangeable. Match the latest exact SKU and your specific factory colour/VIN. The names/revisions above follow identified parts-list references and may differ in later market catalogues.

What You Receive

1 × Genuine Royal Enfield rear mudguard with factory-specified sticker — RAQ00470/B, Gun Grey Matt.

This is the complete product identity as documented in the OEM part description. Separate hardware, brackets, lamps, number-plate components, indicators, mounting rubbers, wiring, additional loose decals and shipping protection are not promised unless physically present in the genuine sealed package.

Important: The illustrated catalogue shows additional components used on the motorcycle. A diagram showing screws, spacers, tail-lamps or wiring beside the mudguard does not mean those items are included in one retail unit.

When to Replace the Rear Mudguard

Replacement may be appropriate after a rear impact, a bent or cracked fender, damaged attachment points, significant corrosion or paint damage, or when restoring the factory Dark Gunmetal Grey finish. Confirm whether the problem is actually the mudguard rather than a detachable tail-lamp bracket, rear mud flap or number-plate holder before purchasing.

Installation and Inspection Notes

1. Identify the motorcycle as Classic 350 Reborn/J-Series and confirm its original Dark Gunmetal Grey colour and rear-body configuration.
2. Match the exact original mudguard part number or dealer VIN/EPC application against RAQ00470/B.
3. Compare the existing panel for mounting tabs, holes, rear tail-lamp/indicator fittings and the OEM sticker arrangement before removing the old part.
4. Protect the matte painted surface from tools and contact during installation. Matte finishes must not be polished as if they were gloss paint.
5. Transfer or replace surrounding fasteners, lamps, mud flap, registration plate mounts and cable clips separately only where indicated by the correct service procedure.
6. Use manufacturer-authorised fastening torque values for the exact motorcycle and fastener; do not guess torque settings.
7. After fitting, check wheel/tyre clearance, harness routing, tail-lamp function and registration-plate positioning before riding.

Professional fitting is recommended for painted rear bodywork because improper installation may scratch the finish, damage wiring or create insufficient tyre clearance.

Frequently Asked Questions

1. Does RAQ00470/B fit the Royal Enfield Classic 350 Reborn?

Yes, the exact SKU is documented for the Dark Gunmetal Grey Classic 350 Euro V/J-Series application. Verify the VIN and market/revision.

2. Is this for the old Classic 350 UCE?

No confirmed application exists for older UCE Classic 350 motorcycles; they use different-generation bodywork. Do not order without exact OEM matching.

3. Does it fit a Classic 350 with factory alloy wheels?

An exact-SKU retailer identifies the Dark Gunmetal Grey alloy-wheel variant. Confirm that your factory colour and rear-body part number match.

4. Is the colour Gun Grey or Dark Gunmetal Grey?

The OEM wording is Gun Grey Matt; the corresponding factory model colour is Dark Gunmetal Grey.

5. Is it shiny gloss grey?

No. The documented finish is matte (Matt), not gloss.

6. Are stickers included?

The OEM description says “rear mudguard with sticker.” The precise graphic and placement should still be checked against the original product.

7. Is this the front mudguard?

No. This is the rear wheel mudguard/fender.

8. Will it fit Bullet 350 J-Series?

Complete part-number fitment is not established. Similar styling or engine family is not sufficient.

9. Are the tail lamp and indicators included?

They are not listed as included with RAQ00470/B and should be ordered separately if needed.

10. Does it include mounting bolts and washers?

Not established by the OEM retail package description. Do not assume additional loose hardware is included.

11. Can I use it on a Stealth Black or Signals Grey Classic?

Not as an exact factory-colour replacement. Those have different painted/sticker references.

12. Will the paint perfectly match my old motorcycle?

It is the factory Gun Grey Matt specification, but age, sun exposure, previous paintwork and production variation may affect perceived matching.

13. Can I order only the rear sticker instead?

Some graphics appear as separate references in parts diagrams. A decal-only order is a different item; verify its exact part number.

14. Is this genuine Royal Enfield?

Yes, RAQ00470/B is the documented genuine Royal Enfield part number.

15. What should I check before placing an international order?

Confirm the VIN/EPC number, factory colour, original mounting arrangement and destination shipping conditions; large painted parts require careful handling.

Before You Buy — Avoid a Wrong-Colour or Wrong-Generation Order

Important: This is a Classic 350 Reborn/J-Series Dark Gunmetal Grey rear mudguard, not a universal Royal Enfield fender. Please compare the original SKU, exact factory colour/graphics, motorcycle generation and mounting configuration. Where necessary, confirm the VIN-specific part with an authorised Royal Enfield dealer before buying.

At Under The Hood, correctly supplied spare parts are generally not returnable for wrong selection, change of mind, or incorrect fitment diagnosis, subject to applicable consumer law. Any wrong, damaged or missing-item claim must follow the published policy, including a full unboxing video and timely reporting within 24 hours. Do not fit, modify or paint the part before confirming it is correct.

Common Buyer Search Names

Classic 350 Reborn rear mudguard, Classic 350 J Series rear fender, Dark Gunmetal Grey rear mudguard, gun grey matte rear wheel fender, Classic 350 OEM back mudguard with sticker, Classic 350 rear body panel, RAQ00470/B, RAQ00470, genuine Royal Enfield Classic 350 rear fender.

Image and Google Shopping Identification

Suggested photo names: royal-enfield-classic-350-dark-gunmetal-grey-rear-mudguard-raq00470-b.jpg; raq00470-b-genuine-rear-fender-sticker-gun-grey-matt.jpg; classic-350-reborn-rear-mudguard-underside-mounting-points.jpg.

Suggested alt text: Genuine Royal Enfield Classic 350 Reborn Dark Gunmetal Grey rear mudguard with sticker RAQ00470/B; Classic 350 J-Series Gun Grey Matt rear fender OEM part; Royal Enfield RAQ00470/B rear mudguard factory colour and mounting detail.

Google Shopping: Brand Royal Enfield; MPN RAQ00470/B; condition New. GTIN should be supplied only when printed on verified genuine packaging. Product weight and dimensions must be physically measured.