Royal Enfield Classic Reborn/Bullet 350 Rear Spoke RAT00606/A

Replace a damaged or missing rear-wheel spoke on a compatible Royal Enfield Classic 350 Reborn or new Bullet 350 J-Series spoke-wheel model with genuine rear spoke RAT00606/A. The factory description is SPOKE - REAR.

Quantity alert: This listing supplies one rear-wheel spoke. The applicable rear wheel uses 36 spokes. Select the quantity required after a wheel technician inspects the complete wheel.

Nipple alert: Spoke nipple RAJ00298 is a separate part and is not included. Order one nipple for each spoke being replaced unless a technician confirms the existing nipple can be reused.

Fitment warning: This spoke is for the specified 18-inch spoked rear wheel. It is not for an alloy rear wheel, front wheel or every Royal Enfield spoke wheel. Match RAT00606/A, wheel type, rim, hub and spoke profile before ordering.

What This Product Is

• Genuine Royal Enfield rear-wheel spoke
• Complete manufacturer part number / MPN: RAT00606/A
• Base search reference: RAT00606
• Factory description: SPOKE - REAR
• Designed for confirmed Classic 350 Reborn and Bullet 350 J-Series spoked rear-wheel assemblies
• Sold individually

Rear-Wheel Spoke Setup

The exact rim and hub finish depend on the motorcycle variant and colour scheme. The spoke must still match the removed spoke and the VIN-specific wheel catalogue.

Confirmed Product Details

No unverified spoke length, bend angle, head diameter, wire diameter, material grade, plating specification or nipple thread size is claimed. Compare the new and removed spoke before installation.

Confirmed Compatibility

Fitment applies only to versions whose rear-wheel parts catalogue specifies RAT00606 or RAT00606/A. Model name alone is not enough because wheel type and components can vary by variant, colour scheme, market and production update.

Do Not Order For

• Classic 350 Reborn variants fitted with an alloy rear wheel
• Any front wheel
• Meteor 350 alloy rear wheel
• Hunter 350 alloy wheel or a different spoke-wheel conversion
• Older Classic 350 UCE or Bullet 350 UCE unless the exact wheel catalogue specifies RAT00606/A
• Classic 500, Bullet 500, Electra, Thunderbird or Himalayan without exact catalogue confirmation
• Interceptor 650, Continental GT 650, Super Meteor 650, Shotgun 650, Bear 650 or Classic 650
• Himalayan 450 or Guerrilla 450
• Any custom rim, aftermarket hub or wheel-conversion setup
• Any wheel position specifying RAT00607/A, RAT00222/A, RAT00259/A, RAT00329/A or another spoke reference

Similar-Spoke Warning

Royal Enfield uses many visually similar wheel spokes. Similar length or appearance does not prove interchangeability.

No supersession or interchangeability between RAT00606/A and RAT00607/A is claimed.

What This Product Is Not

• Not a complete set of 36 spokes
• Not a spoke-and-nipple kit
• Not a spoke nipple
• Not a front-wheel spoke
• Not a complete wheel assembly
• Not a rear rim, hub, rim tape, tube or tyre
• Not suitable for alloy wheels
• Not a universal motorcycle spoke

Key Buyer Benefits

• Exact genuine Royal Enfield RAT00606/A reference
• Suitable for replacing one or more damaged catalogue-matched rear spokes
• Individual sale lets buyers order the inspected quantity
• Clear 36-spoke full-wheel quantity prevents accidental single-piece assumptions
• Separate nipple information prevents incomplete repair orders
• Compatibility limited to confirmed spoked-wheel applications
• Useful for wheel restoration, repair and professional truing work

Common Reasons for Replacement

• Spoke is bent
• Spoke is broken or missing
• Thread is stripped or seized inside the nipple
• Spoke head or elbow is damaged
• Corrosion has weakened the spoke
• Rear wheel has lost correct spoke tension
• Rim or hub repair requires removal of affected spokes

A loose or broken spoke can indicate uneven tension across the wheel. Replacing one spoke without inspecting and truing the complete wheel can leave the rim unsafe or out of alignment.

What You Will Receive

1 × Genuine Royal Enfield rear-wheel spoke – RAT00606/A

Spoke nipple RAJ00298, rim, hub, rim tape, tube, tyre and fitting service are not included. Select the number of spokes required after inspection.

Before You Buy

• Confirm the complete part number RAT00606/A.
• Confirm rear wheel, not front wheel.
• Confirm an 18-inch spoked rear wheel is fitted.
• Confirm the motorcycle is not using an alloy rear wheel.
• Compare the removed spoke’s overall length, bends, head and threaded end.
• Confirm whether nipple RAJ00298 is also required.
• Count how many spokes need replacement.
• Inspect the remaining spokes, rim and hub for damage.
• Share the VIN or a clear photograph of the wheel and old spoke if uncertain.
• Do not order only by motorcycle name or wheel diameter.

Installation and Wheel-Safety Notes

Spoke replacement, wheel lacing, tensioning and truing should be completed by an experienced motorcycle wheel technician.

• Remove wheel load before loosening or replacing spokes.
• Inspect the rim holes and hub flange for cracking, elongation or corrosion.
• Use the correct spoke pattern and direction.
• Use the correct nipple and ensure the threads engage smoothly.
• Bring spoke tension up gradually rather than tightening one spoke fully.
• Balance tension across neighbouring spokes.
• Check radial and lateral wheel runout.
• Confirm wheel alignment, tyre seating and brake operation after refitting.
• Recheck spoke tension after the technician’s recommended bedding-in distance.
• Do not ride with a loose, incorrectly laced or untrued wheel.

Important Order and Return Policy

Orders cannot be cancelled once placed. We do not offer exchanges. A correctly supplied spoke is not returnable or refundable after it has been opened, threaded, tensioned, bent, cut, ground, marked, test-fitted, installed or used. Ordering by motorcycle name without confirming the wheel, old spoke and complete part number does not make the supplied part incorrect. Record a continuous unboxing video and report any wrong, missing or transit-damaged item within 24 hours with the required proof.

Frequently Asked Questions

What is Royal Enfield part RAT00606/A?

It is a genuine rear-wheel spoke for catalogue-confirmed Royal Enfield spoked rear-wheel assemblies.

Is RAT00606 the same search reference?

RAT00606 is the base catalogue/search reference. The complete current part number used in this listing is RAT00606/A.

How many spokes will I receive?

You will receive one rear spoke for every quantity ordered.

How many spokes does the applicable rear wheel use?

The confirmed wheel diagrams specify 36 rear spokes.

Is the spoke nipple included?

No. Nipple RAJ00298 is a separate part.

Does it fit Classic 350 Reborn?

Yes, on catalogue-confirmed variants fitted with the applicable 18-inch spoked rear wheel.

Does it fit the new Bullet 350?

Yes, on the J-Series Bullet 350 spoked rear wheel where RAT00606/A is specified.

Does it fit an alloy-wheel Classic 350?

No. Alloy wheels do not use conventional wheel spokes.

Does it fit the front wheel?

No. RAT00606/A is identified as a rear-wheel spoke.

Does it fit the older Classic 350 UCE?

Do not assume so. Order only if the exact wheel catalogue or removed spoke confirms RAT00606/A.

Does it fit the older Bullet 350 UCE?

Fitment is not presented as universal. Confirm the exact wheel reference before ordering.

Does it fit Meteor 350 or Hunter 350?

Not for their standard alloy-wheel applications. A modified wheel requires component-specific verification.

Is RAT00607/A interchangeable with RAT00606/A?

No interchangeability is confirmed. They are separate spoke references.

Can I buy only one spoke?

Yes. This listing is for one spoke, although the wheel technician should inspect the entire set.

Should I replace all 36 spokes?

Only after professional inspection. The required quantity depends on spoke condition, corrosion, tension consistency and wheel damage.

Can the old nipple be reused?

Only if its threads and flats are undamaged and the wheel technician approves reuse. RAJ00298 is available separately.

Will replacing one spoke straighten the wheel?

Not necessarily. The rim must be checked for radial and lateral runout and the complete wheel tension must be balanced.

Can I fit it without removing the wheel?

That depends on the spoke position and wheel design, but professional wheel removal, inspection and truing are recommended.

How do I prevent ordering the wrong spoke?

Match RAT00606/A and compare the removed spoke, wheel type, rim, hub, profile and VIN-specific parts catalogue.

Can I return it after threading or bending it?

No. Confirm compatibility first. A correctly supplied spoke is not returnable after threading, bending, tensioning, test-fitting or installation.

Buy Royal Enfield RAT00606/A Rear Spoke Online

Order genuine Royal Enfield rear-wheel spoke RAT00606/A from Under The Hood for a compatible Classic 350 Reborn or new Bullet 350 J-Series 18-inch spoked rear wheel. Select the inspected quantity and add nipple RAJ00298 separately when required.

Buyer Search Terms

RAT00606/A, RAT00606A, RAT00606, Royal Enfield rear spoke, Classic 350 Reborn rear spoke, Bullet 350 J-Series rear spoke, Classic Reborn spoked wheel part, Bullet 350 spoke wheel, Royal Enfield 18 inch rear wheel spoke, RAT00606 spoke, RAJ00298 nipple, genuine Royal Enfield wheel spoke, single rear spoke, 36 spoke rear wheel.