Royal Enfield Footrest Casting RH (Right Side Footrest Bracket) for Guerrilla 450 – RAE00893/C

Royal Enfield Footrest Casting, RH (Right-Hand side) is the OEM footrest mounting casting/bracket used on the chassis/footrest assembly—built to hold the footrest hardware in correct alignment and restore factory ergonomics. If your right-side footrest area is bent, cracked, loose, or misaligned after a fall or curb hit, this part helps bring back proper foot position, stable mounting, and reduced vibration/looseness.

This is especially relevant when workshops find repeated loosening, abnormal tilt of the footrest, or difficulty aligning footrest pins/bolts due to a damaged casting. OEM fitment matters here because even small dimensional differences can cause unsafe foot placement or fastener stress.

Also searched as: right footrest bracket, RH footrest mount, foot peg casting, footrest holder RH, footrest base bracket.

Before you buy: Order strictly by part number RAE00893/C and match the RH (right side) + mounting shape with your bike’s existing part (photo/VIN verification recommended).

Key Features

• Genuine-style RH (Right-Hand) footrest mounting casting part number RAE00893/C

• Restores correct footrest alignment after impact/bending damage

• Helps eliminate wobble/looseness caused by distorted mounting points

• Designed for direct replacement of damaged RH casting (match by photo)

• Critical safety component: supports stable rider/passenger foot placement (as applicable)

• Ideal for accident repairs, chassis rebuilds, and workshop restoration jobs

• Return-prevention friendly: RH/LH confusion avoided via checklist + photo match

• Works best with inspection of related hardware (pins/bolts/bushes) during install

Compatibility Table 

Explicit exclusion (return-prevention): Do not assume fitment for Himalayan 450 / other 450 platform bikes unless your old part number matches RAE00893/C.

Variants

No variants.

FAQs 

Q1 (Fitment): How do I confirm this is correct for my Guerrilla 450?
Match part number RAE00893/C from your old part / dealer invoice, and compare a clear photo of the existing RH casting (bolt-hole spacing and shape). If available, share your VIN with us for cross-check guidance.

Q2 (Fitment): RH means which side—right as sitting on the bike or facing the bike?
RH = Right-Hand side as you sit on the motorcycle (throttle side). Always compare with the removed part before ordering.

Q3 (Comparison): Why choose OEM casting vs local welded repair/aftermarket bracket?
Footrest mount geometry is safety-critical. OEM-spec castings maintain correct alignment and load distribution; welded/aftermarket pieces often vary in angle/hole alignment, increasing loosening and fastener stress.

Q4 (Installation): Is installation straightforward? What precautions are needed?
Replacement is typically bolt-on, but you should inspect for bent bolts/pins, damaged threads, and any stress cracks nearby. Use correct torque and thread-lock as per workshop standard. If your bike had a hard impact, check alignment of adjoining brackets too.

Q5 (Symptoms): What problems does this solve?
Common symptoms include tilted footrest, footrest wobble, repeated loosening, difficulty inserting pins/bolts, or visible cracks/bend on the RH mounting casting.

Q6 (Returns-prevention): What should I share to avoid a wrong order?
Send (1) a photo of the existing RH casting, (2) your bike model/year, and (3) any part-number reference from invoice/box/old part. If the old part number does not match RAE00893/C, do not order.