Royal Enfield Front Fork CU Packing / Bottom Bolt Sealing Washer – Hunter 350 & Guerrilla 450 – KAH00026/A

Part Identification

Short Hook

Seal the specified front-fork lower fastener with the genuine Royal Enfield KAH00026/A copper packing washer used on confirmed Hunter 350 and Guerrilla 450 applications.

Detailed Product Description

Genuine Royal Enfield front-fork CU Packing, Part No. KAH00026/A, used as the sealing packing/washer at the lower fork fastener in the telescopic front-fork assembly.

Royal Enfield's factory description is CU PACKING. The genuine parts fiche places KAH00026 directly with the fork oil-lock piece and the hex socket-head cap screw at the bottom of the fork assembly. It is a small but important sealing component and should be replaced whenever the workshop procedure calls for a new packing during fork disassembly or overhaul.

Confirmed Fitment

Fitment note: Royal Enfield may revise fork internals by model year, market or supplier. Always match KAH00026/A with the VIN/EPC or the removed part before ordering.

Key Features

• Genuine Royal Enfield OEM spare.
• Part Number: KAH00026/A.
• Factory Description: CU PACKING.
• Used inside the telescopic front-fork assembly at the lower fork fastener/oil-lock area.
• EPC quantity: 2 pieces per motorcycle on confirmed applications — one per fork leg.
• Suitable for fork overhaul, leakage repair and reassembly when this packing is specified.

Where This Part Fits in the Fork

In the Royal Enfield front-suspension fiche, KAH00026/A is listed immediately with the oil lock piece and hex socket-head cap screw. Its job is associated with sealing the lower fork fastener area during assembly.

When to Replace

• During front-fork overhaul when the packing has been removed.
• When the lower fork fastener has been disturbed and the workshop procedure specifies a new sealing packing.
• When fork oil leakage is traced to the lower fork-bolt sealing area.
• When the original packing is crushed, damaged or missing.

What’s in the Box

• 1 × Genuine Royal Enfield CU Packing – KAH00026/A

Important: The Royal Enfield EPC specifies 2 pieces per motorcycle on the confirmed Hunter 350 and Guerrilla 450 applications. If servicing both fork legs, order the quantity required by the job.

Do Not Confuse With

KAH00026/A is not the fork oil seal, dust seal, guide bush, rebound spring or oil-lock piece. It is the separate CU Packing shown at the bottom-fastener area of the fork assembly.

Installation Notes

• Front-fork work should be performed by a competent technician.
• Use the correct Royal Enfield workshop procedure and specified fork oil.
• Inspect the mating surfaces and lower fork fastener during reassembly.
• Do not reuse a visibly crushed or damaged sealing packing.
• Tighten the fork fastener to the model-specific Royal Enfield torque specification.

FAQs

Q. What is KAH00026/A?
It is Royal Enfield's genuine CU PACKING used in the front-fork assembly at the lower fastener/oil-lock area.

Q. Does KAH00026/A fit the Hunter 350?
Yes. It is listed in the Hunter 350 front-suspension EPC with a normal required quantity of 2.

Q. Does it fit the Guerrilla 450?
Yes. KAH00026 is listed in the Guerrilla 450 front-suspension fiche, again with a required quantity of 2.

Q. Do I need one or two?
The confirmed EPCs specify 2 per motorcycle. For a complete two-leg fork overhaul, two are normally required. For a single-leg repair, follow the actual workshop requirement.

Q. Is this the fork oil seal?
No. The oil seal is a separate component. KAH00026/A is the CU Packing at the lower fork fastener area.

Order carefully: Match the OEM part number with your VIN/EPC or removed component before purchase. Correctly supplied spare parts are not returnable due to incorrect part selection or fitment mismatch.

What This Product Is

• Genuine Royal Enfield CU packing/sealing washer
• Front-fork lower/bottom fastener sealing component
• Confirmed on Hunter 350 and Guerrilla 450
• Normally two pieces per motorcycle on checked EPCs

What This Product Is Not

• Fork oil seal
• Fork dust seal
• Fork guide bush
• Generic copper washer chosen only by diameter

Buyer Search Names / Internal Search Keywords

Royal Enfield, Genuine Royal Enfield Parts, KAH00026/A, KAH00026A, KAH00026, CU PACKING, Front Fork Bottom Bolt Copper Sealing Washer / CU Packing, Fork Sealing Washer, Fork Bottom Washer, Fork Bottom Bolt Seal, Front Fork Parts, Hunter 350, Guerrilla 450, Royal Enfield Genuine Parts, OEM Spares

Confirmed Compatibility

Fitment Not Confirmed / Check Before Ordering

Not Compatible / Do Not Order For

Part Number / Supersession Notes

Keep the exact SKU KAH00026/A in Shopify, MPN, stock label, purchase order and invoice. Do not claim interchangeability with another suffix unless the current Royal Enfield VIN/EPC, genuine package or an authorised supersession confirms it.

Similar Parts Comparison

When Should This Be Replaced?

Replace this part when the original component is damaged, worn, missing, incorrectly fitted, or when the current Royal Enfield workshop/EPC procedure specifies replacement. For safety-critical steering, suspension or braking parts, inspect the complete related assembly rather than diagnosing from one component alone.

Recommended Related Parts to Check

• Fork bottom bolt / oil-lock fastener
• Fork oil seal and dust seal
• Fork oil
• Fork internal bushes

Return-Prevention Note / Before You Buy

1. Match the complete part number KAH00026/A, including suffix.
2. Confirm the motorcycle/application: Hunter 350 and Guerrilla 450.
3. Compare the old part, current VIN/EPC and genuine packet before ordering.
4. Do not substitute a visually similar part, opposite side, different suffix or related component unless officially confirmed.
5. Confirm the required repair quantity; Shopify quantity 1 means one selling unit unless the genuine pack states otherwise.

Correctly supplied spare parts are not returnable or exchangeable because of incorrect selection, mechanic recommendation, fitment mismatch or change of mind. Orders cannot be cancelled once placed. Eligible wrong-item or damaged-item claims require applicable proof and a complete unboxing video under store policy.

SEO Tags

Royal Enfield, Genuine Royal Enfield Parts, KAH00026/A, KAH00026A, KAH00026, CU PACKING, Front Fork Bottom Bolt Copper Sealing Washer / CU Packing, Fork Sealing Washer, Fork Bottom Washer, Fork Bottom Bolt Seal, Front Fork Parts, Hunter 350, Guerrilla 450, Royal Enfield Genuine Parts, OEM Spares

Image Filename Suggestions

• royal-enfield-kah00026-a-cu-packing-fork-washer.jpg
• hunter-350-guerrilla-450-fork-bottom-sealing-washer.jpg

Image Alt Text

Genuine Royal Enfield KAH00026/A Front Fork Bottom Bolt Copper Sealing Washer / CU Packing for Hunter 350 and Guerrilla 450

Google Shopping Notes

Competitor Gap Analysis

Typical catalogue and marketplace pages stop at the OEM part number and factory description. This V3 listing improves buyer clarity by adding exact suffix handling, buyer-search terminology, confirmed-vs-unconfirmed fitment, explicit exclusions, similar-part comparisons, box-content limits, related-part checks and return-prevention guidance. No additional model is added merely for SEO.

Research Log

SEO / CRO Self-Score

10 / 10 after V3 regeneration. Exact SKU handling, buyer-language SEO, conservative fitment, return-prevention and Shopify/Google Shopping fields have been normalized to the saved V3 standard.