Royal Enfield Goan Classic 350 Tail-Lamp Shroud Rubber Beading – RAQ00826 / RAQ00826/B

Genuine Royal Enfield rubber beading for the Goan Classic 350 tail-lamp shroud in the rear mudguard assembly. Base part number: RAQ00826; verified service-parts revision: RAQ00826/B.

Pack quantity: 1 rubber beading piece. The illustrated rear-mudguard assembly specifies one piece per motorcycle.

What This Part Is

RAQ00826 is the shaped rubber edging/beading installed with the painted tail-lamp shroud on the Royal Enfield Goan Classic 350. It sits at the shroud interface as a dedicated factory trim and cushioning component.

What It Helps Do

• Provides the specified rubber interface around the tail-lamp shroud
• Helps separate adjoining surfaces and reduce direct edge contact
• Helps maintain the intended fit and finished appearance of the rear shroud assembly
• Replaces missing, hardened, torn, stretched or damaged original beading

This component is not advertised as a standalone waterproofing repair. Correct shroud alignment, fasteners, boots, cushions and wiring installation remain essential.

Verified Specifications

Confirmed Fitment

• Royal Enfield Goan Classic 350 — rear mudguard and tail-lamp shroud assembly

The Goan Classic 350 parts book lists RAQ00826 as the common rubber beading beside the colour-specific rear mudguard and painted-shroud components. The same assembly page covers Shack Black, Trip Teal Green, Rave Red and Purple Haze colour schemes.

Colour-Scheme Coverage

The mudguard and shroud may be colour-specific; the rubber beading itself is listed as a common component rather than a painted colour-matched panel.

What Is Included

• 1 × Royal Enfield tail-lamp shroud rubber beading, RAQ00826 family

What Is Not Included

• Painted tail-lamp shroud
• Rear mudguard assembly
• Tail lamp, indicators or wiring harness
• Stiffener bracket, top hats, tail-lamp boot or mounting cushions
• Bolts, nuts, washers, adhesive or installation labour

Related Parts: Do Not Confuse

Revision and Part-Number Note

The illustrated parts book uses base code RAQ00826, while a service-parts record lists RAQ00826/B. The suffix identifies a revision within the part family. This listing keeps the buyer-searchable base code while stating the verified /B reference. If your order is suffix-sensitive, confirm the code printed on the packet against the VIN before installation.

When Replacement Is Recommended

• Beading is missing after tail-lamp or rear-mudguard work
• Rubber is cracked, split, hardened or permanently flattened
• Piece has stretched and no longer follows the shroud edge correctly
• Original beading is cut, pinched or incorrectly refitted
• Rear shroud has been replaced and the old edging is unsuitable for reuse

Fitment Check Before Ordering

1. Confirm the motorcycle is a Royal Enfield Goan Classic 350.
2. Match the parts diagram location around the painted tail-lamp shroud.
3. Match RAQ00826 or the verified RAQ00826/B revision.
4. Do not confuse it with the tail-lamp boot, rubber strap, mounting cushions or mudguard beading from another model.
5. If uncertain, provide the VIN/chassis number, model year and clear photos of the rear shroud edge and old rubber piece.

Installation Guidance

1. Remove the affected rear shroud components only with the motorcycle safely supported.
2. Clean the mating edge and remove dirt without damaging painted surfaces.
3. Compare the new beading with the removed part and identify its correct orientation.
4. Seat it evenly along the intended shroud edge without stretching, twisting or cutting it prematurely.
5. Refit the stiffener, boot, wiring and mounting hardware in the correct factory order.
6. Check that no wiring is trapped and that the shroud sits evenly before tightening fasteners.

Professional installation is recommended when the tail-lamp shroud, mudguard, wiring or mounting points are damaged or incomplete.

Post-Installation Check

• Beading is fully seated with no rolled or pinched sections
• Painted shroud is aligned and secure
• Tail lamp and indicators operate normally
• Wiring is not trapped, stretched or touching the tyre
• Rear mudguard maintains safe tyre clearance

Not Universal / Not Confirmed

• Not confirmed for the standard Classic 350 Reborn, Bullet 350, Meteor 350 or Hunter 350.
• Not a universal rubber edge trim sold by length.
• Not the separate RAQ01301/B beading used with certain new Bullet 350 shrouds.
• Do not trim or glue it onto another model merely because the profile appears similar.

Order, Replacement & Cancellation Terms

• Correctly supplied items are not returnable.
• Wrong-item or transit-damage claims must be raised within 24 hours of delivery.
• A complete, clear and uninterrupted unboxing video from the sealed parcel is mandatory for replacement review.
• Installed, cut, stretched, glued, marked, modified, damaged, used or incomplete items are not eligible.
• Orders cannot be cancelled after processing has started.

Buyer Search Terms

Royal Enfield RAQ00826, RAQ00826/B, RAQ00826B, Goan Classic 350 tail lamp shroud rubber, Goan Classic rear light rubber beading, Goan Classic tail light edge trim, rear mudguard shroud rubber, genuine Royal Enfield Goan Classic 350 spare parts.

Frequently Asked Questions

1. What is RAQ00826?

It is the genuine rubber beading fitted around the Goan Classic 350 painted tail-lamp shroud.

2. Which motorcycle is confirmed?

The confirmed application is the Royal Enfield Goan Classic 350.

3. Where is it installed?

It is installed at the tail-lamp shroud interface within the rear mudguard assembly.

4. How many pieces are supplied?

One rubber beading piece is supplied.

5. How many does the motorcycle require?

The illustrated Goan Classic 350 assembly specifies a normal quantity of one.

6. Is this the complete tail-lamp shroud?

No. This listing is for the rubber edging only; the painted shroud is separate.

7. Is the tail lamp included?

No. No lamp, indicator, wiring or electrical component is included.

8. Is the stiffener bracket included?

No. RAQ00823/RAQ00823/C is the separate stiffener bracket.

9. Is the tail-lamp boot included?

No. RAQ00837 is a separate tail-lamp boot.

10. What is the difference between RAQ00826 and RAQ00826/B?

RAQ00826 is the base parts-book code; RAQ00826/B is the verified service-parts revision reference.

11. Does it fit every Goan Classic 350 colour?

The beading is shown as a common assembly item alongside all four colour-specific rear-mudguard options.

12. Is it colour matched?

No painted colour specification is listed because this is the common rubber beading, not the painted shroud or mudguard.

13. Does it fit the standard Classic 350 Reborn?

Standard Classic 350 Reborn fitment is not confirmed for this part number.

14. Does it fit the new Bullet 350?

No. Certain new Bullet 350 shrouds use a different beading reference, so do not substitute by appearance.

15. Is adhesive included?

No adhesive is included, and none should be added unless required by the correct manufacturer repair procedure.

16. Can I cut it to fit another motorcycle?

No. It is a model-specific shaped component, not universal rubber trim sold by length.

17. Are dimensions available?

Verified manufacturer dimensions were not found, so the exact part number and assembly position should be used for identification.

18. How do I confirm fitment?

Match RAQ00826 or RAQ00826/B in the Goan Classic 350 rear-mudguard diagram and verify with the VIN when uncertain.

19. What should I check after fitting?

Check that the beading is seated evenly, the shroud is secure, wiring is clear and all rear lights operate correctly.

20. What is required for a delivery-damage claim?

Contact us within 24 hours and provide a complete, uninterrupted video showing the sealed parcel being opened and the issue.