Royal Enfield Touring Screen Kit KXA00659 for Goan Classic 350, Classic 350 & Bullet 350

Add increased wind protection for highway and long-distance riding with the genuine Royal Enfield KXA00659 Touring Screen Kit. This complete windshield package combines a hard-coated, injection-moulded screen with left- and right-hand mounting bars, lower mounts, rubber grommets, clamps and the model-specific fasteners needed for the documented installation.

KXA00659 is officially supported for the Royal Enfield Goan Classic 350, Classic 350 Reborn/J-Series and All New Bullet 350 J-Series applications. The kit contains two M8 × 50 mm fixings and two spacers specifically required by the Goan Classic fitting procedure, while separate supplied fixing lengths are used for the applicable Classic and Bullet arrangements.

Before buying: Match KXA00659, confirm the exact motorcycle model and inspect the handlebar-clamp and nacelle area. This is not a universal windscreen and must not be ordered for Meteor 350, Hunter 350, older UCE Classic/Bullet motorcycles, Interceptor 650 or any other model without separate part-number confirmation.

What This Product Is

• Genuine Royal Enfield touring windshield / windscreen kit
• Exact manufacturer part number: KXA00659
• Complete screen with model-specific mounting bars, clamps, grommets and hardware
• Designed to increase wind protection around the rider's upper body
• Hard-coated, injection-moulded and scratch-resistant screen construction
• Clear screen design with subtle Royal Enfield branding
• Includes the KXA00659-only spacers and M8 × 50 mm fixings used for Goan Classic 350 installation

Key Features

• Model-specific genuine accessory fitment
• Provides a larger wind-deflecting surface than a compact flyscreen or aerovisor
• May help reduce direct wind pressure and riding fatigue at sustained road speeds
• Hard-coated surface helps resist everyday scratching when correctly cleaned
• Injection-moulded screen for consistent shape and mounting alignment
• Left- and right-hand mounting bars position the screen around the motorcycle's nacelle and handlebar area
• Rubber grommets isolate the screen from direct hard contact with the clamps
• Multiple supplied fixing lengths support the documented model-specific installation routes
• Can be adjusted and centralised within the limits shown in the fitting instructions

Confirmed Compatibility

Fitment is based on the current genuine accessory instructions and exact KXA00659 kit contents. Market naming, handlebar hardware and prior modifications can affect installation. A VIN check is recommended where the motorcycle's model generation is unclear.

Fitment Not Confirmed / Check Before Ordering

• Classic 350 or Bullet 350 motorcycles whose generation cannot be identified
• Motorcycles with non-standard handlebars, risers, clamp bolts, nacelle parts or instrument mounts
• Motorcycles with another screen, navigation bracket, phone mount or accessory occupying the same mounting area
• Accident-repaired motorcycles with bent handlebars, distorted clamps or damaged steering components
• Custom builds using adapted Goan Classic, Classic or Bullet components

If any condition above applies, send the VIN and clear photographs of the front, side and upper handlebar-clamp area before ordering. Do not use the shared J-Series engine as evidence that the screen fits another model.

Not Compatible / Do Not Order For

• Royal Enfield Meteor 350
• Royal Enfield Hunter 350
• Older Classic 350/500 UCE motorcycles
• Older Bullet 350/500 UCE, Electra or Thunderbird motorcycles
• Royal Enfield Interceptor 650 or Continental GT 650
• Royal Enfield Super Meteor 650, Shotgun 650, Bear 650 or Classic 650
• Royal Enfield Himalayan, Scram or Guerrilla models
• Any motorcycle requiring a different Royal Enfield touring-screen part number

KXA00659 Versus KXA00147

No supersession claim is made. Order the number confirmed for the motorcycle and required hardware. The KXA00659-only spacers and long fixings are especially important for the Goan Classic route.

What You Will Receive

The complete hardware inventory should be checked before installation. The motorcycle, tools, protective cloths and any phone/navigation mount shown in photographs are not included.

Technical Details

No unverified screen dimensions, weight or universal handlebar size is stated. The screen should be ordered by exact part number and confirmed model, not by approximate height or photographs alone.

What the Screen Can and Cannot Do

The touring screen redirects part of the oncoming airflow and may reduce direct wind pressure on the rider during highway and long-distance riding. The actual effect depends on rider height, helmet, posture, screen adjustment, road speed, crosswinds and surrounding traffic.

• It does not create a completely wind-free riding area.
• It cannot guarantee the elimination of helmet buffeting or wind noise.
• It does not replace an approved helmet, visor or eye protection.
• It is not a structural lifting, towing or tie-down point.
• It does not protect the rider from every stone, object or impact.

Installation Overview

1. Support the motorcycle securely and protect the fuel tank and nacelle from accidental contact.
2. Fit the four rubber grommets into the touring windshield.
3. Prepare the four screen clamps with the supplied M5 fasteners and nuts without fully tightening.
4. Attach the clamps to the screen through the rubber grommets and identify the left- and right-hand mounting bars.
5. Assemble the two lower mounts with the M6 × 14 mm fixings and nuts.
6. Loosen the correct handlebar-clamp fixings for the motorcycle-specific route while supporting the handlebar.
7. For Goan Classic 350, preserve the handlebar alignment mark and install the two supplied spacers and M8 × 50 mm fixings.
8. Slide the mounting bars through the lower mounts and screen clamps, centralise the screen and set its permitted height.
9. Tighten all fasteners progressively to the applicable official torque values.
10. Verify handlebar alignment, steering movement, screen clearance and fastener security before riding.

Official Torque Reference

Torque data is supplied to help a qualified installer identify the correct procedure. It is not a substitute for the complete current fitting document, a calibrated torque wrench or correct model identification.

Installation Safety

• Loosening handlebar clamps can allow the handlebar to drop onto the fuel tank or nacelle.
• Support the handlebar and use protective material over painted surfaces.
• Do not mix the M8 × 35, M8 × 45 and M8 × 50 mm fixings.
• Do not omit the Goan Classic spacers or substitute random washers.
• Ensure no cable, wiring loom or brake hose is trapped or stretched.
• Turn the handlebar fully left and right to verify unrestricted steering.
• Stop if the screen sits twisted, touches the nacelle or requires force to align.
• Recheck all mounts after the first ride and periodically during servicing.

Cleaning and Care

• Rinse loose dust and grit before wiping the screen.
• Use clean water, mild soap and a soft microfibre cloth.
• Wipe gently rather than using dry circular scrubbing.
• Avoid petrol, brake cleaner, glass cleaners containing aggressive chemicals and abrasive compounds.
• Do not use paper towels, rough cloth or scouring pads.
• Remove insect residue after soaking it with water rather than scraping.
• Inspect the screen for cracks and the mounts for looseness after an impact.
• Replace a cracked, severely scratched or distorted screen before further use.

Before You Buy

1. Confirm the required accessory number is KXA00659.
2. Confirm the motorcycle is Goan Classic 350, Classic 350 Reborn/J-Series or All New Bullet 350 J-Series.
3. Do not rely only on the words “Classic 350” or “Bullet 350”; confirm the generation.
4. Inspect the handlebar, clamp bolts, nacelle and surrounding accessory area.
5. Check that no aftermarket mount will obstruct the screen bars or lower mounts.
6. Verify all sixteen kit-content groups before installation.
7. Keep the M8 × 35, M8 × 45 and M8 × 50 mm fixings separated and labelled.
8. Arrange professional installation with a calibrated torque wrench.

Fitment and Return-Prevention Notice

Verify the model, generation, VIN, handlebar arrangement and KXA00659 label before ordering. Once an order is placed, it is confirmed and cannot be cancelled, modified, exchanged or refunded for wrong selection, change of mind, duplicate ordering, model mismatch or failure to verify compatibility. Correctly supplied items are non-returnable.

Installed, marked, scratched, cracked, altered, incomplete or damaged parts may not qualify for return or replacement. Record one continuous unboxing video showing the unopened parcel, shipping label, seals, Royal Enfield product label, complete screen, both mounting bars, clamps, grommets and all hardware packets. Report a wrong, missing or transit-damaged item within 24 hours with the continuous video, clear photographs and original packaging. Do not begin installation until the issue is resolved.

Frequently Asked Questions

1. What is KXA00659?

It is a genuine Royal Enfield touring windshield kit with the screen, mounting bars, clamps, grommets and model-specific fittings.

2. Which motorcycles are confirmed for KXA00659?

Confirmed applications are Goan Classic 350, Classic 350 Reborn/J-Series and All New Bullet 350 J-Series.

3. Does it fit Goan Classic 350?

Yes. The kit includes two spacers and two M8 × 50 mm fixings specifically identified for the Goan Classic installation route.

4. Does it fit Classic 350 Reborn?

Yes, for the confirmed J-Series/BSVI Classic 350 application when the motorcycle retains the correct handlebar and clamp arrangement.

5. Does it fit the new Bullet 350?

Yes, for the All New Bullet 350 J-Series/BSVI application using the documented Bullet 350 installation route.

6. Does it fit older Classic or Bullet UCE motorcycles?

No direct fitment is claimed for older UCE motorcycles under this listing. Verify the required part number separately.

7. Does it fit Meteor 350 or Hunter 350?

No. A shared engine family does not make the front mounting arrangement compatible.

8. Is KXA00659 the same as KXA00147?

No automatic interchange or supersession should be assumed. KXA00659 includes two specific spacers and M8 × 50 mm fixings not listed as part of KXA00147.

9. Is the complete mounting kit included?

Yes. The official kit inventory lists the screen, both mounting bars, two lower mounts, four clamps, four grommets and all specified fixings, nuts, washers and spacers.

10. What colour is the screen?

The verified product configuration is clear.

11. What material is the screen?

It is made from hard-coated, injection-moulded high-impact acrylic.

12. Is it scratch-proof?

No screen is scratch-proof. It is described as scratch resistant, but incorrect dry wiping or abrasive cleaners can still damage it.

13. Will it eliminate all wind and helmet buffeting?

No. Wind protection varies with rider height, helmet, posture, adjustment, speed and crosswinds.

14. Can the screen height be adjusted?

The mounting bars allow positioning within the limits and reference measurements shown in the official fitting instructions.

15. Are the Goan Classic spacers optional?

No. Use the specified spacers and M8 × 50 mm fixings for the documented Goan Classic installation.

16. Must the handlebar clamps be loosened?

Yes. The fitting procedure requires access to handlebar-clamp fixings, so the handlebar must be supported and its alignment preserved.

17. What torque is used on the small screen fixings?

The M5 × 16 mm, M5 × 12 mm and M6 × 14 mm screen-mounting fixings are specified at 3 Nm.

18. Should installation be professional?

Yes. Incorrect handlebar-clamp alignment or torque can create an unsafe riding condition.

19. What should be checked after installation?

Check screen centralisation, handlebar alignment, full steering movement, cable clearance and every fixing before riding and after the first ride.

20. Can it be returned after installation?

Correctly supplied installed, marked or scratched parts are non-returnable. Confirm fitment and inspect every component before installation.