Royal Enfield Guerrilla 450 M5 Top Hat Compression Limiter – RAG00441/C

Genuine Royal Enfield M5 top-hat compression limiter used in the Guerrilla 450 front lighting and instrument-cluster mounting assembly. Royal Enfield’s OEM description is “TOP HAT COMPRESSION LIMITER, M5”.

In simple buyer language, this is a small metal mounting sleeve / spacer used with the front instrument and lighting mounting hardware. The verified assembly uses 4 pieces per motorcycle.

Part Identification

What Does This Part Do?

A compression limiter is a rigid sleeve used inside or alongside a mounted component so that tightening the fastener does not simply crush the surrounding mounting material. In the Guerrilla 450 front lighting / instrument assembly, RAG00441/C is the M5 top-hat compression limiter.

It is a small component, but its dimensions and position matter. A generic washer, bush or sleeve that looks similar should not be substituted unless the size and application are confirmed.

Confirmed Compatibility

Fitment rule: For later model-year or revised front-end variants, confirm RAG00441/C through the Royal Enfield VIN-based catalogue before ordering.

Quantity — Important

The Royal Enfield parts book specifies 4 × RAG00441 compression limiters in the verified assembly.

• This listing supplies 1 piece.
• If replacing the complete set used in the assembly, order quantity 4.
• If only one original limiter is missing or damaged, order the quantity actually required.

Do Not Confuse With RAG00310/C

These are different parts. RAG00310/C is the M6 compression limiter; RAG00441/C is the M5 compression limiter. Do not interchange them simply because both have the same “top hat compression limiter” description.

Suffix / Revision Note – /B vs /C

Older and public overseas genuine-parts catalogues still show RAG00441/B. Current supplied genuine-parts documentation records RAG00441/C. This listing is therefore created under the current supplied SKU RAG00441/C.

Royal Enfield suffixes can indicate a revision or supply update. If an older catalogue, invoice or removed packet shows /B, use the current VIN-based parts lookup or genuine packet to confirm the correct latest suffix rather than assuming every revision is automatically identical.

Related Guerrilla 450 Front Mounting Parts

What You Receive

• 1 × Genuine Royal Enfield M5 Top Hat Compression Limiter
• Part Number: RAG00441/C

What Is Not Included?

• Other three compression limiters required for a complete four-piece replacement
• M6 compression limiter RAG00310/C
• Rubber grommets
• Clip nuts
• Bolts or other fasteners
• TFT mount / instrument bracket
• Headlamp / TFT frame assembly

When Should It Be Replaced?

• The original limiter is missing during front-end reassembly.
• The sleeve is bent, crushed or deformed.
• Corrosion or physical damage prevents correct seating.
• The associated bracket or mounting hardware has been damaged in an accident.
• The original limiter was lost during headlamp / TFT / front mounting work.

Installation & Ordering Notes

• Confirm that you need the M5 limiter, not the separate M6 RAG00310/C.
• Match RAG00441/C before opening the packet.
• Order quantity 4 only when replacing the complete set used in the verified assembly.
• Do not replace it with an unverified generic sleeve, bush or washer.
• Inspect the associated brackets, grommets, clip nuts and fasteners after front-end impact.
• Use the correct Royal Enfield mounting hardware and tightening procedure.
• Professional installation is recommended if the headlamp / instrument mounting assembly remains misaligned.

Ordering & Return Note

Please confirm RAG00441/C, the M5 specification and required quantity before opening or installing the part. Correctly supplied parts are not returnable for wrong selection or change of mind. Wrong, damaged or missing-item claims should be reported with a complete unboxing video within 24 hours of delivery.

Frequently Asked Questions

Q: What is RAG00441/C?
It is the genuine Royal Enfield M5 top-hat compression limiter used in the Guerrilla 450 front lighting and instrument mounting assembly.

Q: Is this a bolt?
No. It is a compression limiter / mounting sleeve used with the mounting hardware. The fastener is separate.

Q: Is this a rubber grommet?
No. It is a rigid compression limiter. The rubber mounting grommets are separate parts.

Q: How many are used on one Guerrilla 450?
The verified parts-book assembly specifies 4 pieces.

Q: Does this listing include all four?
No. The listing is sold per piece. Select quantity 4 if you need the full four-piece requirement.

Q: Is RAG00310/C the same part?
No. RAG00310/C is an M6 × 12.8 compression limiter and only 2 are used in the assembly. RAG00441/C is the M5 version and 4 are used.

Q: Why do some websites show RAG00441/B?
Some public catalogues still show the earlier /B revision. This listing is for the current supplied /C SKU. Verify the latest supersession through the VIN catalogue if your older documentation shows /B.

Q: Does it fit Himalayan 450?
This listing does not claim Himalayan 450 compatibility without an exact official parts-catalogue match. Shared platform architecture or similar appearance is not enough to confirm fitment.

Buyer Search Terms

Royal Enfield Guerrilla 450 M5 compression limiter, Guerrilla 450 top hat spacer M5, Guerrilla 450 mounting sleeve, Guerrilla 450 TFT mounting spacer, Guerrilla 450 instrument mounting sleeve, GRR 450 M5 top hat, Royal Enfield RAG00441/C, RAG00441C, RAG00441/B, RAG00441B, RAG00441, genuine Guerrilla 450 front mounting hardware.