Royal Enfield H6902016/B – Hex Socket Head Cap Screw M6x60 (Grade 10.9, WHT) – Genuine OEM High-Tensile Bolt

Royal Enfield H6902016/B is a genuine hex socket head cap screw (Allen bolt) in size M6 × 60 mm, high-tensile grade 10.9, with WHT (white) finish as listed in official Royal Enfield price lists and dealer catalogs. Multiple trusted sources, including Bike-Parts-RoyalEnfield.

This is not a hardware-shop bolt; it’s an OE fastener matched to Royal Enfield torque specs, clamping loads and corrosion-resistance requirements. Export/import HSN data also lists H6902016/B specifically as “BOLT, CAP, M6 X60, 10.9, WHT” under fasteners HS code 73181500, confirming its use as a high-strength structural screw.

H6902016/B appears in Royal Enfield crankcase/engine partsbooks with a “normal qty required” of multiple pieces, showing it’s commonly used in engine, casing and bracket locations where a long M6 high-tensile bolt is required. It’s ideal when you’re rebuilding an engine, replacing damaged or rounded bolts, or undoing previous jugaad with non-OE fasteners.

Because the same part number is used across many different models, the safest way to use this listing is: match the part number in your bike’s microfiche or on your original bolt/packet. If it says H6902016 or H6902016/B, this is the correct replacement.

Key Features

• Genuine Royal Enfield OEM fastener – Part No. H6902016/B (also shown simply as H6902016 in some partsbooks).

• Specified as “HEX SOCKET HEAD CAP SCREW / BOLT, CAP, M6 X 60, 10.9, WHT” in official price lists and dealer catalogs.

• M6 × 60 mm, grade 10.9 – high-tensile steel for critical structural and engine applications.

• WHT (white) OE finish for corrosion resistance and clean factory look.

• Used widely in crankcase / engine & bracket assemblies, where multiple H6902016 bolts are required per engine.

• Direct swap for damaged, rusted, stretched or rounded original bolts – no dimension guesswork.

• Correct head style & socket depth for OE Allen keys and proper torque application.

• Listed under fastener HSN 73181500 for exports, making it paperwork-friendly for international customers.

• Supplied in original Royal Enfield packing via Under The Hood – not generic hardware.

Compatibility Table

(Fastener is shared across many bikes; compatibility is strictly part-number based.)

🔴 Rule: If your RE microfiche / DMS / bill clearly shows H6902016/B for the location you’re working on, this is correct. If it shows a different code, buy that exact one instead.

PLEASE CHECK PART NUMBER BEFORE PURCHASE 

Variants

This fastener does not have cosmetic or LH/RH variants; just minor coding differences:

• H6902016 – base code seen in some partsbooks (e.g., crankcase page).

• H6902016/B – current price-list / export code with HS & rate details.

On your product page you can mention: “You may receive H6902016 or H6902016/B – both are the same OEM spec bolt.”

FAQs

Q1. Where is H6902016/B used on my bike?
It’s used anywhere the official Royal Enfield parts catalog calls for “BOLT, CAP, M6 X 60, 10.9, WHT – H6902016/B” – commonly crankcase, engine covers, or structural brackets. Exact positions vary by model, so always check your fiche.

Q2. Can I replace this with a local M6×60 bolt from a hardware shop?
Physically yes, but it’s risky. H6902016/B is grade 10.9 with specific finish and tolerance; a random bolt may be weaker or dimensionally off, which can lead to stripped threads, leaks or clamp failure over time.

Q3. How many pieces do I need?
Your partsbook will show “Normal Qty Required” for each assembly. On some crankcase pages, H6902016 appears with a quantity such as 9 pcs for that engine. Always order according to your fiche plus a couple of spares for workshop stock.

Q4. Does this bolt come with a washer or nut?
No. This listing is for the bolt only. Any washers, spacers or nuts are separate part numbers and should be ordered if required by your diagram.

Q5. How do I confirm I’m ordering the right fastener?
Open your Royal Enfield microfiche / RE Kart / dealer DMS, navigate to the relevant assembly (e.g., crankcase, bracket, etc.), and confirm the part number is H6902016 or H6902016/B at that position before ordering.