Royal Enfield HHF Bolt M8 x 105 10.9 White H6901046/D OEM Hardware

Royal Enfield H6901046/D Bolt, HHF, M8 x 105, 10.9, White is a genuine Royal Enfield OEM hardware fastener used in catalogue-matched Royal Enfield assemblies where this exact bolt is specified. It is commonly searched as a Royal Enfield M8 x 105 bolt, HHF bolt, 10.9 grade bolt, white finish bolt, seat assembly bolt or Royal Enfield OEM hardware bolt.

This is a small but important fastener. Royal Enfield uses specific bolts with defined diameter, length, grade and finish across body, seat, frame, bracket and chassis-related assemblies. A wrong local bolt may have incorrect length, low tensile strength, wrong thread engagement, poor plating or incorrect flange/head profile, which can lead to loosening, damaged threads, poor clamping, rattling, misalignment or repeated workshop rework.

Bike-Parts Royal Enfield identifies H6901046/D as Bolt, HHF, M8 x 105, 10.9, WHT and confirms it as a certified genuine Royal Enfield spare part. Royal Enfield price-list references also list H6901046/D – Bolt, HHF, M8 x 105, 10.9, WHT. KMoto parts diagrams show this bolt used in Royal Enfield Seat Assembly references, with normal quantity 1 in that diagram.

Use this bolt only where H6901046/D or H6901046 is specified in the exact Royal Enfield parts diagram. This is not a universal M8 bolt, not an M8 x 85 bolt, not an M8 x 55 bolt, not an M10 bolt, not a nut, not a washer and not a complete hardware kit.

Key Features

• Genuine Royal Enfield spare part
• Part number: H6901046/D
• Part family reference: H6901046
• Factory description: Bolt, HHF, M8 x 105, 10.9, WHT
• Size: M8 x 105
• Grade: 10.9
• White finish / WHT as per Royal Enfield description
• Used in catalogue-matched Royal Enfield assemblies where this exact bolt is specified
• Useful for replacing missing, rusted, rounded, bent, stretched or incorrect local bolts
• Better fitment confidence than random hardware-store bolts with unknown grade or length

Buyer Search Names / Internal Search Keywords

Customers may also search this part as: Royal Enfield H6901046/D, H6901046D, H6901046, bolt HHF M8 x 105, M8x105 Royal Enfield bolt, M8 105mm bolt Royal Enfield, 10.9 grade Royal Enfield bolt, white HHF bolt, Royal Enfield seat assembly bolt, Royal Enfield OEM fastener.

Verified Identification

Catalogue-Matched Application References

Important Fitment Note

This listing is for one HHF bolt M8 x 105, grade 10.9, white finish unless a different quantity is selected. It is not a nut, not a washer, not a spacer, not a shorter M8 bolt, not an M10 bolt, not a complete seat assembly, not a complete bracket kit and not a universal fastener for every Royal Enfield position.

Do not order only by approximate length or by visual appearance. Royal Enfield uses many similar-looking bolts with different length, grade, thread engagement, finish and application. Match H6901046/D in the exact parts diagram before purchase.

H6901046/D vs Similar Royal Enfield Hardware

When Should This Bolt Be Replaced?

• Original bolt is missing after service or repair
• Bolt threads are damaged, stretched or cross-threaded
• Bolt head is rounded or damaged
• Bolt is rusted, seized or bent
• Wrong local bolt has been fitted earlier
• Assembly is loose due to incorrect bolt length or grade
• Workshop wants correct genuine Royal Enfield hardware instead of mixed local fasteners

Why This Part Matters

Small hardware decides repair quality. Using the wrong bolt can damage threads, reduce clamping strength, create rattles or compromise the assembly it secures. The correct H6901046/D M8 x 105 grade 10.9 HHF bolt helps maintain the intended Royal Enfield hardware specification where this part number is called out.

Recommended Related Parts to Check

• Matching nut or threaded mounting point used with this bolt
• Washers or spacers in the same assembly
• Thread condition on the mating part
• Adjacent bracket, seat mount or body mount
• Other bolts disturbed during the same repair

What’s in the Box

1 x Royal Enfield Bolt, HHF, M8 x 105, 10.9, WHT – H6901046/D

Nuts, washers, spacers, brackets, seat assembly and other hardware are included only if specifically supplied or shown separately.

Installation Notes

• Install only in the exact catalogue-specified position.
• Confirm size, grade and old-part match before fitting.
• Do not force the bolt if thread engagement is not smooth.
• Replace damaged mating nuts or threaded mounts before installation.
• Use the correct torque specification for the exact assembly.
• After installation, check the fitted part for secure mounting and vibration-free operation.

Return-Prevention Note

Order only if your motorcycle requires H6901046/D Bolt, HHF, M8 x 105, 10.9, WHT. This is a part-number-specific Royal Enfield hardware fastener and should not be treated as a universal M8 bolt for every application.

FAQs

What is Royal Enfield H6901046/D?

H6901046/D is a genuine Royal Enfield Bolt, HHF, M8 x 105, 10.9, WHT.

What size is this bolt?

The identified size is M8 x 105.

What grade is H6901046/D?

The identified grade is 10.9.

What does WHT mean?

WHT refers to the white finish/plating description used in Royal Enfield parts references.

Is this sold as one piece?

Yes, this listing should be treated as 1 piece unless a pack/quantity option is specifically created.

Can I use a generic M8 bolt instead?

Not recommended. Length, grade, head/flange style and finish matter. Use the genuine part where H6901046/D is specified.

Is this a seat assembly bolt?

KMoto Royal Enfield parts diagrams show H6901046/D in seat assembly references. Use it only in the exact diagram position where the part number is specified.

Is this a nut or washer?

No. This is a bolt, not a nut or washer.

Is this a genuine Royal Enfield part?

Yes. Bike-Parts Royal Enfield identifies H6901046/D as a certified genuine Royal Enfield spare part.