Royal Enfield Himalayan 411 BS6 Windshield – Genuine Wind Shield – RAN00176/C

The Royal Enfield RAN00176/C Wind Shield is the genuine OEM windshield for Himalayan 411 BS6 models, as listed in the official Royal Enfield parts catalogue simply as “WIND SHIELD”.

Made from 2.3 mm polycarbonate, this screen is shock-resistant and shatter-resistant, helping protect you from stone chips and road debris while riding on rough highways or off-road trails. It’s designed to stay rigid without wobbling or distorting under high wind pressure or hot weather, and it resists common chemicals like petrol, gasoline and alcohol-based cleaners—exactly as highlighted by multiple Genuine Accessory sellers.

Because it’s an original Royal Enfield part, the mounting holes and contour line up perfectly with the Himalayan BS6 headlamp frame and cockpit, so you avoid typical aftermarket issues like poor fit, vibration, and cracked brackets. Weight is roughly 0.2 kg, keeping the front end light while still giving meaningful wind deflection.

If your stock windshield is cracked, scratched, yellowed, or you’re restoring a BS6 Himalayan back to showroom spec, RAN00176/C is the correct OEM replacement—no guesswork, no jugaad.

Key Features

• Genuine Royal Enfield part – Official WIND SHIELD, part no. RAN00176/C, listed in RE’s fiche and dealer systems.

• Designed for Himalayan 411 BS6 – Confirmed for Himalayan Tripper BS6 / Euro V models, 2021–2023.

• Durable polycarbonate construction – 2.3 mm thick polycarbonate, offering high impact resistance and long life.

• Shock-resistant & shatter-resistant – Minimises breakage from stone chips and small debris, ideal for touring and trail use.

• Stable at speed – Engineered to remain rigid, with low distortion even under strong wind pressure and high temperatures.

• Chemical resistant – Withstands contact with petrol/gasoline and alcohol-based cleaners used on bikes.

• Exact factory fitment – Matches Himalayan BS6 mounting frame; bolts straight on using the stock hardware.

• Ideal for replacement or restoration – Perfect if your original screen is scratched, cracked, sun-faded or missing.

Compatibility Table 

PLEASE CHECK PART NUMBER BEFORE PURCHASE SINCE THERE ARE 2 MODELS OF WINDSHIELD 

Important notes:

• Novatronix lists this as fitting HIMALAYAN ABS – BSVI, HIMALAYAN – EURO V, HIMALAYAN ABS WITH TRIPPER, HIMALAYAN ABS WITHOUT TRIPPER, under part no. RAN00176/C.

• Category tags on some sites also include Scram 411, but they do not explicitly state model-level fitment in the description. To avoid returns, we do not formally claim Scram 411 compatibility here.

Explicitly NOT confirmed / treated as incompatible:

• Himalayan 450 / Guerrilla 450

• BS3/BS4 Himalayan 411 (pre-BS6) – earlier models used a different windshield part number

• All Classic / Bullet / Meteor / Hunter / J-Series

• 650 Twins, Super Meteor 650, Shotgun 650

Variants

• Part: Wind Shield / Windshield

• Part Number: RAN00176/C (supersedes RAN00176)

• Material: Polycarbonate, approx. 2.3 mm thick

• Colour: OEM Himalayan BS6 finish (clear / OE tint depending on batch)

Single OEM variant only for this part number.

What’s in the Box

• 1 × Genuine Royal Enfield Himalayan BS6 Wind Shield – RAN00176/C

(Mounting bolts, cockpit frame, grommets and rubber bushes are normally reused from your existing setup and are not included unless shown separately in your product photos.)

Installation Notes

• Ideal to install at a Royal Enfield service centre or experienced Himalayan mechanic.

• Remove the old screen, retaining rubber grommets and spacers if in good condition.

• Clean the cockpit/headlamp frame contact areas before fitting the new shield.

• Do not overtighten screws—polycarbonate can stress-crack if hardware is over-torqued.

• After fitment, check for interference with handlebar at full lock and for any vibration or contact with accessories (mobile mounts, top racks, etc.) during a short test ride.

FAQs

Q1. Will RAN00176/C fit my BS4 Himalayan (carb / early FI)?
A1. No clear, official cross-reference was found. All major sellers and fiche sources describe RAN00176/C specifically as Himalayan 411 BS6 / Euro V windshield (2021–2023). BS3/BS4 Himalayan models used a different screen design and part number, so we do not recommend this part for older bikes without VIN-based confirmation.

Q2. Does this windshield fit Scram 411?
A2. Some sites list Himalayan windshield products under categories that also include Scram 411, but they don’t explicitly state RAN00176/C as a Scram part. To avoid misfit and returns, we treat Scram 411 compatibility as unconfirmed (❓). 

Q3. Is this windshield tinted or clear?
A3. Most catalogue descriptions simply say “Wind Shield” and show it in the standard OEM finish. Some overseas listings mention “smoke windshield” for RAN00176, while Novatronix explicitly sells a clear version that fits this part number. Finish can vary slightly by market and batch; check our product photos for the exact shade currently in stock.

Q4. What is the thickness and weight of the screen?
A4. Multiple Genuine Accessory listings specify 2.3 mm polycarbonate thickness and roughly 0.200 kg weight for the Himalayan 411 BS6 windshield corresponding to RAN00176/C.

Q5. Why choose OEM instead of a cheaper aftermarket visor?
A5. OEM RAN00176/C is built to Royal Enfield’s dimensions and material spec, so it aligns perfectly with the cockpit frame, stays rigid at highway speeds, and avoids stress on bolts or brackets. Cheap aftermarket visors often vibrate, crack around mounting points, or interfere with the console and headlamp.