Royal Enfield Himalayan 411 & Bullet Trials 500 Genuine Mirror Thread Guard Plug | 141460 / 141460/A | Pack of 50

Genuine Royal Enfield Mirror Thread Guard / Plug – 141460 / 141460/A

Part Number: 141460
Current Royal Enfield Service Reference: 141460/A
Factory Description: MIRROR THR GUARD

141460 / 141460/A is the genuine Royal Enfield mirror thread guard / protective plug used in the handlebar and lever-control assembly on compatible Royal Enfield motorcycles.

Royal Enfield's retired-model catalogue describes the part more precisely as “Plug, Mirror Thread Guard (RH Lever Side)”. It fits at the applicable right-hand lever / mirror mounting point and protects the threaded mirror-mounting location when the factory assembly calls for this guard.

Common buyer search names include mirror thread plug, mirror hole plug, mirror mount thread protector, RH lever mirror plug, mirror mounting hole cap and Royal Enfield mirror thread guard.

What This Part Does

The mirror thread guard is a small but specific handlebar-control component. It is used at the mirror mounting thread in the applicable lever-holder / control arrangement.

Its purpose is to:

• cover and protect the specified mirror mounting thread,
• keep the unused threaded location clean,
• reduce exposure of the thread to dirt, water and corrosion,
• help prevent thread damage while the position is unused,
• and retain the original factory-finished appearance of the handlebar / lever area.

This is therefore not a decorative random cap: it is an OEM service part for a specific threaded location in the Royal Enfield handlebar-control system.

Exact Position – RH Lever Side

Royal Enfield specifically identifies 141460/A as a Mirror Thread Guard – RH Lever Side.

RH means the rider's right-hand side when seated normally on the motorcycle.

The part is associated with the handlebar / front-control / mirror mounting area, not the engine, chassis, mudguard or wheel assembly.

Verified Compatibility

Royal Enfield's combined UCE and retired-model catalogues also show 141460/A within older handlebar / control assemblies. However, the exact mirror and lever-holder arrangement varies by model and production period.

For other Classic, Bullet, Electra, Thunderbird, Machismo or retired Royal Enfield models, order only when the model/VIN-specific EPC or the removed original part confirms 141460/A.

Himalayan 411 Application

The Himalayan 411 ABS BS6 handlebar catalogue lists 141460/A – MIRROR THR GUARD directly within the handlebar assembly.

It is shown alongside the lever, switchgear, hand grips, handlebar pipe and related handlebar components, confirming that this is a handlebar / mirror-mount service part.

Bullet Trials 500 Application

The Bullet Trials 500 Euro IV factory parts catalogue lists 141460/A – MIRROR THR GUARD in the handlebar assembly.

The catalogue shows a normal motorcycle assembly quantity of 1 piece. This confirms that the part is used as an individual thread guard at its intended handlebar-control position.

141460 vs 141460/A

Older Royal Enfield data lists 141460 as PLUG. Current genuine-parts data identifies 141460/A as MIRROR THR GUARD and shows the /A number as the replacement service reference for the earlier 141460 number.

This listing retains 141460 as the selling / stock SKU while cross-referencing 141460/A so buyers searching either number can identify the correct part.

Not a Rear-View Mirror

141460 / 141460/A is not a mirror assembly.

It does not include mirror glass, mirror stem, mirror body or mirror mounting nut.

If the actual mirror is broken or missing, identify the correct LH or RH mirror assembly for the motorcycle separately.

Not a Mirror Lock Nut

This thread guard is also different from the nut used to secure a mirror stem.

A mirror nut mechanically locks the mirror in position. 141460/A is the protective thread guard / plug.

Not a Mirror Adapter

This part does not change mirror thread size or thread direction.

It is not:

• a mirror adapter,
• a reverse-thread converter,
• a mirror extender,
• a mirror riser,
• or an aftermarket mirror mounting bracket.

Not a Bar-End Plug / Handle Balancer

Do not confuse this part with a handlebar-end component.

141460/A is not a:

• bar-end weight,
• handle balancer,
• grip-end cap,
• bar-end mirror adapter,
• or handlebar end plug.

It belongs at the specified mirror mounting thread in the lever / handlebar control area.

When Is a Mirror Thread Guard Required?

Replacement is appropriate when:

• the original guard is missing,
• it has been lost during mirror or lever-holder servicing,
• the old plug is damaged or deformed,
• the mirror mounting thread is exposed where the factory specifies this guard,
• the motorcycle is being restored to the original handlebar-control configuration,
• or the Royal Enfield EPC specifies 141460/A.

Why an Exposed Mirror Thread Should Not Be Left Open

An unused threaded mounting hole can collect dirt, water, polishing residue and road contamination. Over time, contamination or corrosion can make future mirror installation more difficult.

Using the correct OEM thread guard protects the mounting location without altering the lever holder or mirror thread.

Before Ordering

Please confirm:

1. The required part number is 141460 or 141460/A.
2. You need the mirror thread guard / plug, not the mirror itself.
3. The motorcycle's handlebar / lever-holder arrangement uses this part.
4. The application is at the specified RH lever-side mirror mounting point.
5. For models other than the verified applications above, the exact VIN/EPC confirms 141460/A.

Installation Guidance

• Inspect the mirror mounting thread before installation.
• Remove dirt and corrosion from the threaded location.
• Check that no broken mirror stem or fastener remains inside the mounting point.
• Do not force the guard into a damaged or incorrect thread.
• If the mirror-mount thread is damaged, repair the thread correctly before fitting the guard.
• Fit the guard in the same location and orientation as the original factory component.

Pack Information

This listing is supplied as a full packet of 50 pieces.

The pack quantity is a sales / supply quantity and does not mean that 50 pieces are installed on one motorcycle.

What You Receive

• 50 × Genuine Royal Enfield Mirror Thread Guards / Plugs
• Selling SKU: 141460
• Current Service Reference: 141460/A

Frequently Asked Questions

Q. What is Royal Enfield 141460 / 141460/A?
A. It is a genuine Royal Enfield Mirror Thread Guard / Plug used in the handlebar-control assembly at the applicable RH lever-side mirror mounting thread.

Q. Where exactly is it used?
A. At the specified mirror mounting thread in the handlebar / lever-holder area. Royal Enfield describes it as the RH Lever Side mirror thread guard.

Q. Why is it fitted?
A. It protects the specified mirror mounting thread when the factory handlebar arrangement requires the threaded location to be guarded / plugged.

Q. Does it fit Himalayan 411?
A. Yes. 141460/A is directly listed in the Himalayan 411 ABS BS6 handlebar catalogue.

Q. Does it fit Bullet Trials 500?
A. Yes. The Bullet Trials 500 Euro IV parts catalogue directly lists 141460/A in the handlebar assembly.

Q. Does it fit Classic 350, Classic 500, Bullet 350 or Electra?
A. 141460/A appears within older Royal Enfield UCE / retired-model handlebar-control catalogues, but the exact lever-holder and mirror arrangement varies. Use the exact model/VIN EPC before ordering for those motorcycles.

Q. Is this a mirror?
A. No. It is only the mirror-thread guard / protective plug.

Q. Is it a mirror nut?
A. No. It does not secure a mirror stem; it protects / closes the specified threaded mounting location.

Q. Is it a bar-end weight?
A. No. It is fitted at the mirror-thread / lever-holder area, not at the open end of the handlebar.

Q. Is 141460/A the replacement for old 141460?
A. Yes. Current genuine-parts data shows old 141460 “Plug” with 141460/A “Mirror Thr Guard” as the replacement service reference.

Q. How many pieces are supplied in this listing?
A. 50 pieces in one packet.

Buyer Search Terms

Royal Enfield 141460, 141460/A, 141460A, mirror thread guard, mirror thread plug, mirror hole plug, mirror mount plug, mirror thread protector, RH lever mirror plug, Royal Enfield mirror mounting plug, Himalayan 411 mirror thread guard, Bullet Trials 500 mirror thread guard, mirror mounting hole cap, handlebar mirror plug, genuine Royal Enfield mirror spare.