Royal Enfield Himalayan 411 & Scram 411 Centre Stand Kit – Genuine OEM KAW00003/A

Genuine Royal Enfield KAW00003/A centre stand / main stand kit for the Himalayan 411 and Scram 411 motorcycle family. A centre stand helps support the motorcycle upright for appropriate parking and routine chain or rear-wheel maintenance. Match the exact motorcycle VIN, model-year configuration and centre-stand mounting points before ordering.

Product identification

What is this kit?

This is an OEM centre-stand kit rather than a standalone bare stand. The supplied Royal Enfield bill of materials identifies the stand and the related spring, spindle, split-pin, washer, stopper, add-on plate and bolt references. It is intended to provide the necessary centre-stand assembly components for the specified application, but actual individual retail piece counts must be checked against the sealed pack.

OEM component references

The following are nine distinct component references in the OEM kit breakdown. This is not a confirmation that the retail packet contains exactly nine individual pieces: some references can be used more than once.

Confirmed application and fitment checks

Do not assume fitment for Himalayan 450, Guerrilla 450, Scram 440 or other Royal Enfield models. These have different motorcycle configurations and are not established by the present evidence.

Why two motorcycle names appear

The Royal Enfield exact-SKU reference describes KAW00003/A as a D3K Himalayan centre stand kit, while the genuine KAW00003 partsbook application is published for Scram 411. Both applications are relevant to customers searching for this kit. The exact VIN and current physical mounting configuration still determine suitability for an individual bike.

What is not separately promised

No toolkit, side stand, side-stand sensor, luggage accessories or motorcycle jack is included by this listing. No additional hardware beyond the disclosed OEM reference list is promised. Hardware quantities must be checked against the genuine sealed packet, not estimated from generic centre-stand diagrams.

When to replace or install

Choose a genuine kit when installing a centre stand on a compatible motorcycle, or when restoring the stand assembly after damage, deformation, excessive pivot wear, failed springs or a missing stopper. Inspect the chassis mounting points and associated fasteners before fitting; replacing the stand alone will not correct damaged frame brackets.

Installation guidance

Installation should be carried out by a qualified motorcycle technician. Support the motorcycle safely, confirm correct spring orientation and pivot hardware, inspect mount condition and clearance around the exhaust and moving parts, and check full deployment/retraction before riding. Do not substitute unspecified torque values or alter chassis mounting points. A centre stand is not a substitute for a certified workshop lift.

Before you buy

Compare your motorcycle’s VIN/EPC application and existing mounting points with KAW00003/A. If fitting to a Scram 411 without a factory stand, confirm the retrofit requirements and kit revision. For Himalayan 411, confirm the stand configuration and production year. Genuine spare parts that are correctly supplied are not generally returnable for incorrect selection, inaccurate diagnosis or change of mind once processed. Report wrong, damaged or missing contents within 24 hours of delivery, supported by a complete unboxing video, subject to store policy and applicable law.

Frequently asked questions

Does this kit fit the Himalayan 411?

Yes. The exact KAW00003/A OEM catalogue description names the D3K Himalayan; confirm VIN/EPC for your production year.

Does it fit the Scram 411?

The genuine KAW00003 partsbook lists it as a Scram 411 centre stand retrofit kit. Confirm the /A revision and motorcycle mounting arrangement.

Will it fit the Himalayan 450?

No compatibility is established for Himalayan 450. Do not order on the assumption that the mounts are shared.

Will it fit Scram 440?

No exact compatibility has been established for Scram 440.

Is this a centre stand or a side stand?

It is a centre/main stand kit, not the motorcycle’s side stand.

Does the kit contain the stand itself?

The supplied OEM breakdown identifies RAW00268/C, centre stand black, as a kit component.

Are springs included?

The OEM breakdown includes spring references 144766/A and 587959/B. Their individual physical quantities must be confirmed on the sealed pack.

Are pivot parts listed?

Yes. The breakdown identifies spindle 587518/C, washer 586008/B and split pin 586017/C. Exact piece counts are not independently verified.

Are fixing bolts included?

The breakdown lists 586025/A M8 × 1.25 × 16 bolt; verify sealed packet quantity.

What is the finish?

The stand reference RAW00268/C is described as black.

Can I install it myself?

Professional installation is recommended because the assembly has spring tension, loaded pivot hardware and important ground clearance checks.

Is it genuine Royal Enfield?

The listing is for genuine Royal Enfield kit number KAW00003/A. Confirm authenticity from genuine product packaging on receipt.

Useful buyer search terms

Royal Enfield Himalayan 411 centre stand, Himalayan 411 main stand kit, Scram 411 centre stand, Scram 411 double stand kit, Scram 411 centre stand retrofit, Royal Enfield main stand genuine, KAW00003/A centre stand, RAW00268/C centre stand, Himalayan 411 center stand assembly.

Image identification guidance

Suggested product photo names: royal-enfield-kaw00003-a-himalayan-411-scram-411-centre-stand-kit.jpg; royal-enfield-raw00268-c-black-main-stand.jpg. Suggested alt text: Genuine Royal Enfield KAW00003/A Himalayan 411 and Scram 411 centre stand kit; OEM black centre stand RAW00268/C and installation parts. Photograph actual packet and components to establish supplied quantities.