Royal Enfield
Royal Enfield Himalayan 450 / Bear 650 Black Waterproof Tail Pack 12.5L – KXA00442
Royal Enfield Himalayan 450 / Bear 650 Black Waterproof Tail Pack 12.5L – KXA00442
Couldn't load pickup availability
Out of stock
We will notify you once product becomes available.Please order only after confirming the part number, model, variant, year, side, connector type and compatibility. All orders are non-cancellable once placed. Correctly shipped spare parts are not eligible for return, exchange or refund due to wrong selection, wrong diagnosis, fitment mismatch, mechanic recommendation or change of mind. Electrical/electronic items are additionally non-returnable once opened, installed, plugged in, tested or used. Wrong item, damaged item or missing item claims require a complete unboxing video within 24 hours. Read full Return & Warranty Policy
Royal Enfield Himalayan 450 / Bear 650 Black Waterproof Tail Pack – 12.5L, 3kg – KXA00442
Genuine Royal Enfield soft-luggage tail pack for the Himalayan 450 and Bear 650. Part number KXA00442 is a lightweight black roll-top bag made from waterproof TPU material, supplied with four dedicated mounting straps. It provides a practical 12.5-litre carrying solution with a strict maximum safe load of 3 kg.
What It Is
KXA00442 is Royal Enfield’s genuine removable black tail pack for the Himalayan 450 / 452cc and Bear 650. Depending on the motorcycle and luggage setup, it can be secured to the Himalayan’s rear luggage area or positioned sideways across the passenger-seat area. On the Bear 650, the official instructions secure it across the seat using the supplied model-specific straps.
What It Is Not
- Not a hard top box.
- Not a pair of side panniers.
- Not the KXA00477 Rally Rackless Soft Pannier kit.
- Not the KXA00294 waterproof inner bag made for an adventure top box.
- Not a universal bag with guaranteed fitment on every motorcycle.
- Not intended to carry more than 3 kg.
- Not submersion-proof or immune to water entry if incorrectly rolled, damaged or left unsecured.
Key Buyer Benefits
- Genuine Royal Enfield GMA luggage accessory.
- Confirmed for Himalayan 450 and Bear 650.
- Waterproof TPU construction with roll-top closure.
- 12.5-litre India-market stated capacity.
- Maximum safe payload of 3 kg.
- Quickly removable when luggage is not required.
- Four supplied mounting straps for the approved installations.
- Black finish suited to touring, commuting and light adventure luggage.
Verified Specifications
| Brand | Royal Enfield |
|---|---|
| Range | Genuine Motorcycle Accessories (GMA) |
| Exact Part Number / MPN | KXA00442 |
| Official Product Name | Black Tail Pack |
| Material | Waterproof TPU |
| Colour | Black |
| India-Market Capacity | 12.5 litres |
| Maximum Safe Load | 3 kg / 6.6 lb – never exceed |
| Closure | Roll-top with internal hook-and-loop tabs, side buckles and securing strap |
| Mounting Type | Removable strap-mounted tail/rear luggage |
| Confirmed Bikes | Royal Enfield Himalayan 450 / 452cc and Bear 650 |
Important Capacity Clarification
Royal Enfield’s current regional websites do not use one consistent volume figure for KXA00442: the official India and UK pages state 12.5 litres, while some other regional pages state 19 litres. This India-market listing uses the current official India specification of 12.5 litres. The official installation instructions consistently set the maximum safe carrying load at 3 kg, which must never be exceeded.
Confirmed Fitment
| Motorcycle | Generation | Status | Approved Mounting Guidance |
|---|---|---|---|
| Royal Enfield Himalayan 450 | 452cc platform | Confirmed | Rear luggage rack/luggage platform installation or sideways over the pillion-seat area as described in the official instructions. |
| Royal Enfield Bear 650 | 650 Twin scrambler platform | Confirmed | Sideways over the seat using the supplied long and short mounting straps anchored around the specified frame tubes. |
Check Before Ordering
| Situation | Required Check |
|---|---|
| Aftermarket seat, luggage rack or top-box plate | Confirm the supplied straps can follow the official routing without sharp edges, heat, moving parts or excessive tension. |
| Modified rear frame or bodywork | Compare the mounting points with the official instructions before purchase. |
| Carrying a pillion | Do not mount the bag where it compromises passenger seating, foot placement or safe movement. |
| Use with other luggage systems | Check that every bag remains independently secure and does not overload the motorcycle’s luggage limits. |
| International/market-specific motorcycle | Confirm the exact model and rear luggage arrangement, especially when non-standard accessories are fitted. |
Not Compatible / Do Not Order For
| Motorcycle / Requirement | Reason |
|---|---|
| Royal Enfield Himalayan 411 | Not listed in the official KXA00442 fitting instructions. |
| Royal Enfield Scram 411 or Scram 440 | Not confirmed for this part number. |
| Royal Enfield Guerrilla 450 | Sharing the Sherpa engine platform does not confirm luggage fitment. |
| Other Royal Enfield models | Do not assume universal fitment from the adjustable straps. |
| Riders needing more than 3 kg load capacity | The official maximum safe load is 3 kg. |
| Customers requiring a rigid lockable box | This is a removable soft roll-top bag, not a hard top box. |
Official Box Contents
| Item | Quantity |
|---|---|
| Black tail pack | 1 |
| Long left-hand mounting strap | 1 |
| Long right-hand mounting strap | 1 |
| Short left-hand mounting strap | 1 |
| Short right-hand mounting strap | 1 |
Only the items included in the sealed Royal Enfield kit are supplied. A motorcycle rack, top-box mount, seat, pannier harness or other luggage accessory is not included unless specifically listed above.
Mounting Guide – Himalayan 450
- Rear luggage-rack position: locate the rear sleeve over the luggage rack with the carry handle facing the rear, route the long straps around the specified rack bosses, connect the G-hooks to the underside webbing loops, tension both sides and secure all loose strap ends.
- Pillion-seat position: the official method may require temporary removal and refitting of the luggage/top-box mount plate, routing the supplied short and long straps around the prescribed rack tubes and centre-stand handles, then positioning the pack sideways on the seat.
- Any removed mounting plate and fixings must be refitted to the official torque specification.
Mounting Guide – Bear 650
- Remove the seat as described in the motorcycle owner’s manual.
- Route the supplied short straps around the specified rear frame tubes.
- Route the long straps around the specified forward frame-tube points.
- Refit and positively latch the seat.
- Position the tail pack sideways over the seat, attach all G-hooks to the underside webbing loops and tension all four straps evenly.
- Secure every excess strap end so it cannot reach the wheel, chain, suspension or exhaust.
Correct Roll-Top Closure
- Fold the opening together and secure the internal hook-and-loop tabs.
- Roll the opening tightly toward the rear face.
- Complete at least three full rolls, or continue until the closure is secure.
- Connect and fully tighten both side buckles.
- Pass the top strap over the pack, connect its buckle and tighten it.
- Place all loose strap tails through the provided elastic loops/clips.
Safety and Loading Rules
- Never exceed the 3 kg maximum safe load.
- Distribute contents evenly and keep dense items low and centred.
- Do not carry fuel, hot components, sharp unprotected tools, leaking containers or hazardous materials.
- Ensure the bag cannot obstruct lights, registration plate, indicators, exhaust, suspension, wheel or chain.
- Check every strap, buckle, G-hook and webbing loop before every ride and at fuel/rest stops.
- Stop immediately if the bag moves, straps loosen or any part touches the motorcycle’s moving/hot components.
- Allow for altered handling and braking when luggage is carried.
Waterproof Use – Important Reality
The bag uses waterproof TPU material and a roll-top closure. Water resistance depends on correct closure, a minimum three-roll seal, undamaged seams/material and correctly fastened buckles. Do not treat the pack as suitable for immersion. Protect sensitive electronics and documents in an additional sealed pouch during severe weather, and inspect the bag after falls or abrasion.
Care Instructions
- Clean with a sponge or soft cloth using water and low-alkaline soap.
- Do not use harsh chemicals, solvents, abrasive brushes or high-pressure spray washers.
- Empty and air-dry the pack completely before storage.
- Store away from direct heat, sharp objects and prolonged sunlight.
- Regularly inspect all straps, hooks, buckles, webbing loops, seams and closure surfaces.
Related-Product Comparison
| Part Number | Product | Key Difference |
|---|---|---|
| KXA00442 | Black Tail Pack | This listing: one removable 12.5L roll-top tail bag, 3 kg maximum load, Himalayan 450 and Bear 650. |
| KXA00477 | Rally Rackless Soft Panniers | Himalayan 450 rackless side-luggage system with two bags and an over-seat harness; KXA00442 can be purchased separately as additional luggage. |
| KXA00294 | Top Box Waterproof Inner Bag | An inner bag designed to sit inside a compatible adventure top box; it is not an external tail pack. |
Buyer Checklist Before Payment
- Confirm your motorcycle is a Himalayan 450/452cc or Bear 650.
- Match the package part number exactly: KXA00442.
- Confirm you want one removable soft tail pack, not panniers or a hard top box.
- Accept the India-market 12.5L capacity and strict 3 kg maximum safe load.
- Compare your existing seat, rack and top-box hardware with the official strap routes.
- Confirm all four mounting straps are present before installation.
- Verify that your planned mounting position does not conflict with a passenger or other luggage.
Return-Prevention Policy
Correctly supplied parts are not returnable. A replacement is considered only if Under The Hood supplies the wrong item or the parcel is damaged in transit, provided the issue is reported within 24 hours of delivery with one clear, continuous and unedited unboxing video showing the sealed parcel, shipping label, packaging and complete contents. Installed, strap-marked, scratched, stained, washed, used, overloaded, modified, incomplete or incorrectly ordered bags are not returnable. Damage caused by wrong mounting, loose straps, contact with the exhaust/wheel/chain, chemicals, pressure washing, abrasion or excess load is not eligible. Orders cannot be cancelled after processing.
Warranty Guidance
Any manufacturer warranty, where applicable, is governed by Royal Enfield’s terms, installation requirements, inspection and regional policy. This listing does not create an additional warranty promise. Retain the invoice, package label and all supplied components.
Why Buy from Under The Hood
- Exact SKU and bike-specific fitment stated in the title.
- India-market capacity used instead of copying conflicting international figures.
- Every officially supplied mounting strap listed individually.
- Separate Himalayan 450 and Bear 650 installation guidance.
- Clear payload, closure and pre-ride safety requirements.
- Related luggage products explained to prevent wrong orders.
Buyer Search Terms
Royal Enfield KXA00442, Himalayan 450 tail bag, Bear 650 tail bag, Himalayan 452 waterproof luggage, Royal Enfield black tail pack, Himalayan 450 rear bag, Bear 650 waterproof seat bag, Royal Enfield 12.5 litre tail pack, motorcycle roll top tail bag, Himalayan 450 luggage rack bag, Bear 650 GMA luggage, KXA 00442, genuine Royal Enfield soft luggage.
Frequently Asked Questions
1. What is Royal Enfield part KXA00442?
It is the genuine black waterproof-TPU removable tail pack for Himalayan 450 and Bear 650.
2. Which motorcycles are officially confirmed?
Royal Enfield confirms the Himalayan 450 / 452cc and Bear 650.
3. Does KXA00442 fit the Himalayan 411?
No. The older Himalayan 411 is not listed in the official fitting instructions.
4. Does it fit the Guerrilla 450?
Fitment is not confirmed. Sharing the Sherpa engine family does not make the seat and luggage mounting points identical.
5. What capacity should Indian buyers use?
The current Royal Enfield India listing specifies 12.5 litres, which is the figure used in this listing.
6. Why do some websites mention 19 litres?
Some Royal Enfield regional pages use a 19-litre description for the same SKU. Regional descriptions conflict, so this India listing conservatively follows the official India 12.5-litre specification.
7. What is the maximum safe load?
3 kg / 6.6 lb. Royal Enfield warns not to exceed this limit.
8. What comes in the box?
One tail pack plus four straps: long LH, long RH, short LH and short RH.
9. Is a luggage rack included?
No. The kit includes the bag and mounting straps only; motorcycle racks, plates and other luggage hardware are not included.
10. Can it be mounted on the Himalayan 450 pillion seat?
Yes, the official instructions include a sideways pillion-seat method using the specified mounting points and supplied straps.
11. Can it be mounted on the Himalayan luggage rack?
Yes. The official instructions provide a luggage-rack installation using the rear sleeve and long straps.
12. How is it fitted to the Bear 650?
The seat is removed, the long and short straps are routed around the specified frame tubes, the seat is refitted and the bag is secured sideways across it.
13. Can a passenger sit with the bag installed?
Do not carry a passenger if the selected mounting position occupies or restricts the passenger seat or safe movement.
14. Is it completely waterproof?
It uses waterproof TPU and a roll-top closure, but correct rolling, intact material and tight buckles are necessary. It should not be treated as submersion-proof.
15. How many times should the opening be rolled?
Royal Enfield instructs a minimum of three complete tight rolls, or more until secure.
16. Is this the same as KXA00477?
No. KXA00477 is the Himalayan 450 Rally Rackless Soft Pannier system; KXA00442 is one separate tail pack.
17. Is this an inner bag for a top box?
No. KXA00294 is the related waterproof top-box inner bag. KXA00442 is an externally mounted tail pack.
18. How should the bag be cleaned?
Use water, low-alkaline soap and a sponge or soft cloth. Do not use chemicals or a high-pressure washer.
19. What must be checked before riding?
Check all four straps, G-hooks, buckles, webbing loops, closure rolls and loose ends, and confirm the bag cannot touch hot or moving parts.
20. Can it be returned after installation?
No. Installed, strap-marked, scratched, stained, washed, used, overloaded, modified or incomplete items are not returnable. Verify SKU and fitment before installation.
Share
Verify Fitment on Official Brand Portals
Verify Fitment on Official Brand Portals
For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.
Royal Enfield Official Spares Portal
Hero MotoCorp Official eCatalogue
Become a Dealer Partner
We supply 100% genuine OEM parts to workshops and dealers across India. Our team will reach out within 24 hours.