Skip to product information
1 of 1

Royal Enfield

Royal Enfield Himalayan 450 Black Low Ride Rider Seat 805/825mm – Genuine KXA00451

Royal Enfield Himalayan 450 Black Low Ride Rider Seat 805/825mm – Genuine KXA00451

Regular price Rs. 3,100.00
Regular price Rs. 3,130.00 Sale price Rs. 3,100.00
Sale Sold out
Shipping calculated at checkout.
Non-cancellable Non-returnable

Please confirm the part number and compatibility before ordering.

Important — Please verify before ordering Confirm the part number, model and compatibility before purchase. Orders are subject to our cancellation and return policy. A continuous unboxing video is required for shortage, incorrect-item and damage claims. Read full Return, Cancellation & Warranty Policy

Genuine Royal Enfield Himalayan 450 Black Low Ride Rider Seat – KXA00451

Looking for a lower reach to the ground on your Royal Enfield Himalayan 450? The genuine Royal Enfield Black Low Ride Seat (KXA00451) replaces the standard rider seat and retains the motorcycle’s two-position seat-height adjustment. It is designed to offer a lower seating position without changing suspension travel. This is the front rider seat only, not a complete rider-and-pillion seat set.

What changes compared with the standard seat?

Royal Enfield publishes 805 mm (low setting) and 825 mm (high setting) for KXA00451, versus 825 mm and 845 mm for the stock Himalayan 450 seat. That is a 20 mm reduction at either corresponding adjustment. Actual reach and footing also depend on the rider’s inseam, footwear, suspension sag and motorcycle load. A lower seat does not guarantee flat-footing.

Seat type Low setting High setting
Standard Himalayan 450 rider seat 825 mm 845 mm
KXA00451 Black Low Ride Seat 805 mm 825 mm
Difference 20 mm lower 20 mm lower

Why choose the genuine low seat?

  • Royal Enfield genuine accessory: exact manufacturer SKU KXA00451.
  • Lower rider seating: two Royal Enfield published positions, 805 mm and 825 mm.
  • Preserves suspension travel: seat-height reduction is achieved by changing the rider seat, not lowering the motorcycle’s suspension.
  • Black finish: intended to coordinate with Himalayan 450 colourways equipped with a stock black passenger seat.
  • Original accessory fitment: specified by Royal Enfield for the Himalayan 450.
  • Manufacturer warranty: Royal Enfield advertises 3 years, subject to applicable warranty conditions and eligibility.

Verified motorcycle compatibility

Motorcycle Compatibility
Royal Enfield Himalayan 450 (452 cc) Confirmed by Royal Enfield official accessory page; check VIN if model changes or accessories affect mounting
Royal Enfield Himalayan 411 / Scram 411 Not compatible on the basis of this accessory listing
Royal Enfield Guerrilla 450 Not confirmed; do not assume interchangeability
Royal Enfield Scram 440 Not confirmed; do not assume interchangeability
Royal Enfield 650 / 350 models Not verified

Important: pillion seat sold separately

KXA00451 is the black low ride rider seat. Royal Enfield advises that riders with a motorcycle whose stock passenger seat is not black may need the separately supplied black pillion seat RAU00180 if they want both seats to visually match. RAU00180 is not included. The original pillion seat may remain usable, but the colour may not match.

Package contents

  • One genuine Royal Enfield Black Low Ride rider seat, part KXA00451.
  • Any manufacturer-supplied fitting documentation or hardware only if physically included in the sealed retail package.

Not included: passenger/pillion seat RAU00180, complete two-seat set, replacement suspension, motorcycle or additional accessories. Verify the OEM label and physical contents before dispatch.

Installation and use

Fit according to the official Royal Enfield accessory instructions and owner’s manual. Make sure the rider seat is properly engaged and locked in its designated mounting position before riding. Confirm clearance and secure installation with any existing luggage, touring accessories or modified seat hardware. If unsure, use an authorised Royal Enfield service centre. Seat-height measurements are nominal manufacturer specifications, not a guarantee of a particular rider’s ability to reach the ground.

Low Ride vs other Himalayan 450 seats

Seat/accessory Purpose Published height
KXA00451 Black Low Ride Seat Lower rider reach 805 / 825 mm
Standard Himalayan 450 rider seat Original configuration 825 / 845 mm
KXA00427 Black Adventure Rider Seat Alternative adventure rider-seat geometry 832 / 852 mm
KXA00405 Rally Dual Seat Distinct rally seat and bodywork application 859 mm listed

These are different seat products with different intended installations. They must not be represented as the same accessory or as interchangeable with every seat and bodywork arrangement.

Ordering checklist

  • Confirm your motorcycle is a Himalayan 450 rather than the older Himalayan 411.
  • Check that the OEM label states KXA00451 and the item is black.
  • Decide whether you also need separately sold black pillion seat RAU00180 for a matched appearance.
  • Inspect the seat and mounting points before installation; confirm it locks securely.
  • If unsure about the height change, compare the 805/825 mm specification with your current seat and test rider reach before riding.

Frequently asked questions

What is Royal Enfield KXA00451?

It is Royal Enfield’s genuine Black Low Ride rider seat accessory for the Himalayan 450.

Is this for the Himalayan 450 or Himalayan 411?

Royal Enfield specifies Himalayan 450. It is not listed as a Himalayan 411 seat.

How low does KXA00451 make the Himalayan 450?

Royal Enfield specifies 805 mm in the lower setting and 825 mm in the higher setting.

How much lower is it than the stock seat?

The published seat height is 20 mm lower than the standard seat at each corresponding adjustment: 805 vs 825 mm and 825 vs 845 mm.

Will it make the motorcycle easier to flat-foot?

It can reduce reach to the ground, but flat-footing depends on inseam, sag, footwear and riding posture. No guarantee is possible.

Does the low seat lower suspension or ground clearance?

It changes the rider seating position, not suspension travel. Royal Enfield specifically describes it as preserving suspension travel.

Is this a complete rider-and-pillion seat set?

No. This listing includes only the Black Low Ride rider seat.

Is the black passenger seat included?

No. The black pillion seat is separately identified by Royal Enfield as RAU00180.

Will this match all Himalayan 450 colours?

The rider seat is black. Royal Enfield says it colour-matches colourways originally fitted with black seats; other combinations may require the optional black pillion seat for a matched appearance.

Is the low seat adjustable?

Yes. The Himalayan 450 retains two seat-position settings, with nominal heights of 805 mm and 825 mm for this accessory.

Is this the same as the Rally Dual Seat?

No. The rally dual seat is a separately numbered accessory KXA00405 with a different seat height and installation application.

Is KXA00451 genuine Royal Enfield?

Yes. KXA00451 is published on Royal Enfield’s official India accessory page as the Black Low Ride Seat.

Will the seat fit a Guerrilla 450?

No verified manufacturer fitment has been established for the Guerrilla 450. Do not order it for that model without an approved cross-reference.

Can I use it with my existing passenger seat?

The existing pillion seat may remain fitted if the motorcycle configuration supports it. A non-black passenger seat may not visually match the black rider seat.

Does the seat include fitting bolts or other accessories?

It is a replacement rider seat. Extra hardware should not be assumed; check the physical OEM package contents.

Can I fit it myself?

Seat replacement is a comparatively straightforward accessory task, but follow Royal Enfield fitting guidance and confirm both secure engagement and locking before riding.

What is the warranty?

Royal Enfield advertises a 3-year accessory warranty, subject to applicable regional warranty terms and eligibility.

Is it suitable for short riders?

It is designed to provide a lower reach to the ground. Rider comfort, legroom and balance are personal; compare the specifications and test sitting where possible.

Can it help without using lowering links?

The accessory lowers the seating position without modifying suspension travel, unlike a suspension-lowering modification.

What is the OEM reference for a matching black pillion seat?

Royal Enfield identifies RAU00180 as the separate black passenger seat assembly.

What is the difference between a low seat and a softer seat?

Low ride refers to seat geometry and resulting riding height; it does not establish a particular foam softness or long-distance comfort improvement.

Do I need to change the entire motorcycle seat unit?

No. KXA00451 is for the front rider-seat position, not a complete replacement for the pillion portion.

Manufacturer reference

Royal Enfield official India accessory listing: Black Low Ride Seat – KXA00451. Published dimensions, price and warranty should be reconfirmed against current local manufacturer information and physical product packaging.

Verify Fitment on Official Brand Portals

For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.

Royal Enfield Official Spares Portal

Hero MotoCorp Official eCatalogue

View full details

Become a Dealer Partner

We supply 100% genuine OEM parts to workshops and dealers across India. Our team will reach out within 24 hours.

100% Genuine OEM Parts
Dedicated Account Manager
Next-Day Dispatch
Exclusive Dealer Pricing