Royal Enfield Side Stand Support Plate RAW00402/D for Himalayan 450

Product Description

Royal Enfield RAW00402/D Side Stand Support Plate is a genuine stand assembly support component used in compatible Royal Enfield Himalayan 450 stand assemblies. Public parts references for the RAW00402 family identify it as a Support / Shunt Plate used in the Himalayan 450 stand assembly area.

This small support plate is part of the side-stand mounting and support hardware group. It is the correct OE-style replacement when the original support plate is bent, missing, corroded, damaged during side-stand work, affected by an impact, or required while rebuilding the Himalayan 450 stand assembly.

Use this genuine Royal Enfield part only where RAW00402/D, RAW00402 or the matching RAW00402 support/shunt plate reference is specified in the stand assembly diagram. It is not the complete side stand, not the side stand spring, not the side stand rubber upstop, not the side stand switch and not a universal bracket. Stand support parts can look simple but differ by shape, hole alignment, thickness and model-specific mounting geometry, so part-number matching is important before ordering.

Key Features

• Genuine Royal Enfield spare part
• Part number: RAW00402/D
• Part family reference: RAW00402
• Public parts references identify the RAW00402 family as Support / Shunt Plate
• Designed for Himalayan 450 stand assembly applications where this part number is specified
• Useful for side stand repair, stand assembly restoration, impact-damage replacement and workshop stock
• Helps restore correct factory stand support hardware where the original part is missing or damaged
• OE-style fitment where the parts catalogue specifies RAW00402/D or RAW00402
• Better fitment accuracy than universal support plates or locally fabricated brackets
• Small but important part for correct side-stand assembly completeness

Buyer Search Names / Internal Search Keywords

Customers may also search this part as: Himalayan 450 side stand support plate, Himalayan 450 stand support, Royal Enfield shunt plate, RAW00402D, RAW00402/D, RAW00402 support, RAW00402/B shunt plate, side stand support bracket, sidestand support plate, stand assembly support, Royal Enfield stand bracket, Himalayan 450 side stand parts.

Verified Compatibility

Important Fitment Note

This listing is for the side stand support / shunt plate only. It is not the side stand assembly, not the centre stand, not the side stand spring, not the side stand rubber upstop, not the side stand switch, not the spindle, not a bolt, not a washer and not a complete stand kit.

Do not order only by visual appearance. Stand support plates may look similar but can differ in mounting-hole position, profile, thickness and stand assembly layout. Please match RAW00402/D or the corresponding RAW00402 catalogue reference before purchase.

Do not order for Classic 350, Bullet 350, Meteor 350, Hunter 350, Himalayan 411, Scram 411, Guerrilla 450, Interceptor 650, Continental GT 650, Super Meteor 650, Shotgun 650, Bear 650, Classic 650, Thunderbird, Electra or Standard models unless the parts diagram confirms the RAW00402 support/shunt plate requirement for that exact motorcycle.

When Should This Part Be Replaced?

• Side stand support plate is bent, damaged or missing
• Stand assembly has been opened for repair or replacement
• Motorcycle has had a side stand impact or underbody hit
• Support plate mounting holes are worn, cracked or misaligned
• Original plate is rusted or structurally weak
• Workshop needs the correct Himalayan 450 stand support part instead of a fabricated bracket

Why This Part Matters

The stand support plate may be a small hardware part, but it helps keep the stand assembly complete and correctly supported. A bent, missing or incorrect plate can create poor alignment, rattling, wrong stand seating or unnecessary stress on nearby stand components. Using the correct genuine Royal Enfield RAW00402/D helps maintain factory-style stand assembly geometry and reduces the risk of poor-fitment repairs.

What’s in the Box

1 x Royal Enfield Side Stand Support / Shunt Plate – RAW00402/D

Side stand, centre stand, springs, rubber upstop, switch, spindle, bolts, washers, nuts and other stand assembly hardware are included only if specifically supplied or shown separately.

Installation Notes

• Install with the motorcycle safely supported and stable.
• Inspect the side stand, pivot area, switch, spring, rubber upstop and related fasteners during installation.
• Replace damaged bolts, washers, pins or brackets separately if required.
• Do not force-fit the support plate if the stand mounting area is bent or misaligned.
• Tighten related hardware as per the correct service manual specification.
• After installation, check side stand movement, return action, switch function and parking stability before riding.
• Professional installation is recommended if the motorcycle has impact damage or stand mounting deformation.

Return-Prevention Note

Order only if your motorcycle requires RAW00402/D Side Stand Support / Shunt Plate. This part should not be confused with the side stand spring, rubber upstop, side stand switch or complete stand assembly. Confirm the exact part number before purchase, especially if the motorcycle has an aftermarket stand, custom bracket or previous accident repair.

FAQs

What is RAW00402/D?

RAW00402/D is a genuine Royal Enfield side stand support / shunt plate used where this part number is specified in the stand assembly.

Does this fit Himalayan 450?

Yes, this listing is for Himalayan 450 stand assembly applications where the RAW00402 support / shunt plate reference is specified.

Is this the complete side stand?

No. This is the support / shunt plate only. The complete side stand assembly is a separate part.

Is this the side stand rubber upstop?

No. The side stand rubber upstop is a different rubber stopper part. This listing is for the RAW00402/D support plate.

Is this the side stand spring?

No. The side stand spring is a separate part and should not be confused with this support plate.

Can this be used on Guerrilla 450 or Bear 650?

Use it on Guerrilla 450, Bear 650 or any other Royal Enfield model only if the exact stand assembly diagram confirms RAW00402/D or the RAW00402 support/shunt plate requirement.

Why is it also called a shunt plate?

Some public parts references describe the RAW00402 family as a shunt plate, while others identify it as a support. For customer clarity, this listing uses both terms.

Does it include bolts or washers?

Bolts, washers and related stand hardware are included only if specifically supplied or shown separately.

Is this a genuine Royal Enfield part?

Yes. This listing is for genuine Royal Enfield part number RAW00402/D.