Royal Enfield Hunter 350 Black Low Ride Dual Seat KXA00631

Make your Royal Enfield Hunter 350 easier to manage at stops without altering the motorcycle's suspension. The genuine Royal Enfield KXA00631 Black Low Ride Dual Seat lowers the seating position by 21 mm compared with the standard seat while retaining seating for both the rider and pillion.

Royal Enfield has retained ample foam thickness to promote even weight distribution and long-ride comfort. The black seat is designed to be waterproof and finished with a heat-embossed Royal Enfield logo for a clean factory-accessory appearance.

Important: KXA00631 is confirmed for the Royal Enfield Hunter 350 / HNTR 350 only. It is not a universal J-Series seat and should not be purchased for Classic 350, Meteor 350, Bullet 350, Goan Classic 350 or any 650 model.

What This Product Is

• Genuine Royal Enfield Black Low Ride Dual Seat
• Exact part number / MPN: KXA00631
• Direct model-specific replacement seat for the Hunter 350
• One-piece dual-seat design for rider and pillion
• Reduces the seat height by 21 mm compared with the standard Hunter seat
• Black waterproof seat design
• Retains ample foam thickness for even weight distribution
• Heat-embossed Royal Enfield logo

Key Features

• Helps shorter riders place their feet closer to the ground at stops
• Can improve low-speed and parking confidence for riders who find the standard seat tall or wide
• Lowers the rider and pillion seating surface without changing suspension travel
• Maintains a proper dual-seat layout rather than converting the motorcycle to a single seat
• Designed to remain comfortable through adequate foam thickness and even weight distribution
• Waterproof construction is suited to everyday road use and changing weather
• Black finish integrates with factory Hunter 350 colour schemes
• Genuine heat-embossed Royal Enfield branding
• Manufacturer-listed installation time of approximately 10 minutes
• Manufacturer-listed three-year warranty, subject to applicable Royal Enfield terms

Confirmed Compatibility

The official compatibility designation is Hunter 350. Factory colour and wheel/brake trim do not normally change the seat reference, but a VIN check is recommended for imported motorcycles, accident-repaired motorcycles and motorcycles with altered rear bodywork or seat-lock hardware.

Not Compatible / Do Not Assume Fitment

• Royal Enfield Classic 350 Reborn
• Royal Enfield Meteor 350
• Royal Enfield Bullet 350 J-Series
• Royal Enfield Goan Classic 350
• Older Classic, Bullet, Electra or Thunderbird UCE motorcycles
• Interceptor 650 / INT 650 and Continental GT 650
• Super Meteor 650, Shotgun 650, Bear 650 or Classic 650
• Himalayan, Scram or Guerrilla models
• Any motorcycle with modified frame tabs, rear bodywork, seat latch or locking mechanism

Several Royal Enfield motorcycles share related engine architecture, but seats depend on the frame, tank profile, side-panel shape, latch and rear-body mounting points. Similar motorcycle appearance is not proof of compatibility.

How Much Lower Is It?

The 21 mm figure refers to seat-height reduction. It does not reduce suspension travel, wheel size, chassis height or official ground clearance. Actual foot reach also depends on rider inseam, footwear, seat width, body weight, suspension preload and how the foam settles under load.

Who This Seat Is Best For

• Riders who can only place the tips of their feet down with the standard seat
• Riders seeking more confidence during parking, reversing and stop-and-go traffic
• Owners who want a lower seating position without changing suspension components
• Riders who still require a proper pillion seating area
• Owners who prefer a genuine, factory-style replacement rather than reshaping the original seat foam

Reach, Riding Position and Comfort Expectations

A lower seat can make ground reach easier, but it also places the rider's hips slightly lower relative to the footrests. Some riders may notice a marginally tighter knee angle. Comfort is personal and depends on height, weight, inseam, riding duration and preferred posture.

Royal Enfield states that the seat retains ample foam thickness to distribute weight evenly and support extended-ride comfort. The seat is not an adjustable-height assembly and does not provide multiple height settings.

What You Will Receive

1 × Genuine Royal Enfield Black Low Ride Dual Seat – KXA00631

This is one complete dual-seat assembly for the rider and pillion positions. It is not a rider-only pad or a separate two-piece rider-and-pillion seat set.

Not Included

• Motorcycle, passenger backrest or grab rail
• KXA00139 Black Signature Bench Seat
• KXA00140 Black Custom Seat
• Replacement seat lock, key, latch or frame hardware unless present in the sealed manufacturer package
• Side panels, rear cowl or luggage accessories
• Installation labour or workshop consumables

Hunter 350 Seat Options

These are alternative seat choices. Do not order by appearance alone; confirm the part number and intended seating result before purchase.

Technical Details

Pre-Purchase Checklist

1. Confirm the motorcycle is a Royal Enfield Hunter 350 / HNTR 350.
2. Confirm the required accessory number is KXA00631.
3. Check whether the 21 mm reduction is appropriate for the rider's inseam and preferred riding posture.
4. Remember that the seat does not lower the suspension or ground clearance.
5. Inspect the original seat latch, lock and frame mounting points for damage or alteration.
6. Confirm that rear bodywork, luggage mounts or custom panels do not obstruct seat removal or locking.
7. Compare the new seat and package label before installation.

Installation Note

• Royal Enfield lists an approximate fitting time of 10 minutes under suitable conditions.
• Follow the Hunter 350 owner's manual for safe seat removal and installation.
• Switch off the ignition and place the motorcycle securely on level ground.
• Do not force the key, seat lock, latch or seat base.
• Confirm that the front locating points and rear locking mechanism engage correctly.
• Press and lift the seat after installation to confirm it is fully locked.
• Check that no cable, wiring, document pouch or accessory strap is trapped beneath the seat.
• Do not ride with a loose seat or a latch that does not positively lock.

Care Instructions

• Clean with water, mild motorcycle cleaner and a soft cloth.
• Avoid petrol, strong solvents, bleach, hard brushes and abrasive polish.
• Wipe away mud, bird droppings and chemicals promptly.
• Although designed to be waterproof, dry the seat after washing and prolonged rain.
• Do not use pressure-washer jets directly around seams, logos or the seat base.
• Inspect the cover, stitching, base and latch area during routine maintenance.

Fitment Note / Return Prevention

Confirm KXA00631 and Hunter 350 compatibility before installation. The seat cannot be returned after fitting, latch marks, base scratches, stains, creasing from use, alteration, chemical damage or missing packaging, subject to applicable law and the current store policy.

Do not modify the foam, cover, base or latch to make an incorrect seat fit. A mismatch may indicate an incorrect model, altered motorcycle, damaged mounting point or wrong installation sequence.

Record one continuous unboxing video showing the sealed parcel, shipping label, Royal Enfield label, complete seat cover, underside, base, latch area and corners. Report a wrong, missing or transit-damaged item within 24 hours with the video and original packaging.

Frequently Asked Questions

1. What is Royal Enfield KXA00631?

It is the genuine Black Low Ride Dual Seat for the Hunter 350.

2. How much does it lower the seat?

Royal Enfield states a 21 mm reduction compared with the standard Hunter 350 seat.

3. What is the approximate new seat height?

The standard Hunter height is 790 mm, so the calculated nominal height is approximately 769 mm. Actual loaded reach varies by rider and motorcycle setup.

4. Does the seat lower the suspension?

No. It changes the seating surface only; suspension travel and chassis height remain unchanged.

5. Does it reduce ground clearance?

No. Installing a lower seat does not itself reduce the motorcycle's ground clearance.

6. Does it fit every Hunter 350?

Hunter 350 is the official compatibility. VIN confirmation is recommended for imported, repaired or modified motorcycles.

7. Does it fit the HNTR 350?

Yes where the market's genuine-accessory catalogue specifies KXA00631 for that motorcycle.

8. Does it fit the 2025 or LED-headlamp Hunter 350?

The current Royal Enfield Hunter 350 accessory catalogue lists KXA00631. Confirm the VIN when the motorcycle has market-specific or modified parts.

9. Does it fit Classic 350 Reborn?

No. It is a Hunter 350-specific seat.

10. Does it fit Meteor 350 or Bullet 350?

No. Those motorcycles use different seat bases and mounting arrangements.

11. Is it a rider-only seat?

No. It is a dual seat that provides seating positions for both rider and pillion.

12. Is it one piece or two pieces?

It is one complete dual-seat assembly.

13. Is the seat waterproof?

Royal Enfield describes it as designed to be waterproof. Normal cleaning and care are still required.

14. Is Royal Enfield branding present?

Yes. The seat has a heat-embossed Royal Enfield logo.

15. Is it comfortable for longer rides?

Royal Enfield states that ample foam thickness is retained for even weight distribution and long-lasting comfort. Personal comfort varies by rider.

16. Will the knee angle change?

The rider's hips sit lower relative to the footrests, so some riders may notice a slightly tighter knee angle.

17. Is the seat height adjustable?

No. KXA00631 is a fixed-height replacement seat with a stated 21 mm reduction.

18. How long does installation take?

Royal Enfield lists approximately 10 minutes under suitable fitting conditions.

19. Are a new lock and key included?

No separate lock-and-key set is promised. The seat is intended to work with the correct original Hunter 350 seat-lock arrangement.

20. Can the seat be returned after fitting?

No. It is not returnable after installation, latch marks, use, alteration or damage, subject to applicable law and the current store policy.