Royal Enfield Hunter 350, Bullet 350 & Goan Classic 350 Clutch Cable Guide Clamp – RAL00475/A

Part Identification

Best Shopify Product Title

Royal Enfield Hunter 350, Bullet 350 & Goan Classic 350 Clutch Cable Guide Clamp – RAL00475/A

URL Handle / Slug

royal-enfield-hunter-350-bullet-350-goan-classic-clutch-cable-guide-clamp-ral00475-a

SEO Title

RAL00475/A Clutch Cable Guide Clamp | Hunter 350 & Bullet 350

Meta Description

Genuine Royal Enfield RAL00475/A clutch cable guide clamp for Hunter 350, Bullet 350 J-Series and Goan Classic 350 applications. Qty 1; verify VIN/EPC.

Short Hook

Keep the clutch cable correctly routed and away from rubbing or pinch points with the genuine Royal Enfield RAL00475/A clutch cable guide clamp specified in confirmed Hunter 350, Bullet 350 and Goan Classic 350 handlebar assemblies.

Detailed Product Description

Royal Enfield RAL00475/A is the genuine OEM GUIDE CLAMP, CLUTCH used to guide and retain the clutch cable in its intended routing path.

This small component is easy to overlook after clutch-cable replacement, handlebar work, engine-guard installation or accident repair. If the original guide is missing, the clutch cable can sit in an incorrect path and may contact nearby chassis or accessory components. Correct routing is important for smooth cable movement and to reduce avoidable rubbing, pinching or premature outer-sheath wear.

Direct Royal Enfield/Hitchcock's EPC evidence places base RAL00475 in the handlebar assemblies of the Hunter 350 and the new Bullet 350 J-Series, each at Qty 1. A separate Goan Classic 350 handlebar catalogue also lists RAL00475, Qty 1.

Buyers may search for this part as a clutch cable clip, clutch cable guide, clutch wire holder, cable routing clamp, cable retainer or clutch cable bracket. The exact genuine part is RAL00475/A.

What This Product Is

• Genuine Royal Enfield OEM clutch cable guide clamp.
• Exact part number RAL00475/A.
• Base EPC reference RAL00475.
• Factory description GUIDE CLAMP, CLUTCH.
• Clutch-cable routing and retention component.
• Confirmed in Hunter 350 handlebar EPC.
• Confirmed in Bullet 350 J-Series handlebar EPC.
• Confirmed in a Goan Classic 350 handlebar parts catalogue.
• Normal checked quantity: 1 per motorcycle/application.

What This Product Is Not

• Not the clutch lever holder or perch.
• Not the clutch cable itself.
• Not a clutch-cable adjuster.
• Not the throttle-cable guide clamp.
• Not a generic zip tie or universal cable P-clip.
• Not an engine-guard mounting bracket.
• Not automatically compatible with every J-Series 350 motorcycle.
• Not the similarly named RAC00475/A wiring harness.

Key Features

• Genuine Royal Enfield factory-spec cable-routing component.
• Exact SKU RAL00475/A.
• Helps retain the clutch cable in its intended route.
• Useful replacement when the original clamp is missing after service or accessory installation.
• Can help prevent avoidable cable rubbing or pinching when correctly installed.
• Direct EPC quantity of one on verified applications.
• Small, inexpensive component with high wrong-part potential due to similar cable guides.

Buyer Search Names / Internal Search Keywords

RAL00475/A, RAL00475A, RAL00475, Royal Enfield RAL00475/A, GUIDE CLAMP CLUTCH, clutch cable guide clamp, clutch cable guide, clutch cable clip, clutch wire clip, clutch wire holder, clutch cable holder, clutch cable retainer, cable routing clamp, Hunter 350 clutch cable clip, Hunter 350 clutch cable guide, Bullet 350 clutch cable guide, Bullet 350 clutch wire holder, Goan Classic 350 clutch cable clamp.

Confirmed Compatibility

Fitment Not Confirmed / Check Before Ordering

Not Compatible / Do Not Order For

Part Number / Supersession Notes

• RAL00475 is the base number displayed in the checked Royal Enfield model EPCs.
• RAL00475/A is the exact current suffix-specific genuine part listed by current Royal Enfield genuine-parts catalogues.
• The February 2024 Indian Royal Enfield price list also records RAL00475/A – GUIDE CLAMP, CLUTCH.
• No later suffix or automatic supersession is being claimed.
• Keep the complete /A suffix in Shopify SKU, MPN, stock labels, purchase orders and invoices.
• Do not confuse RAL00475/A with RAC00475/A; they are completely different parts.

Similar Parts Comparison

When Should This Be Replaced?

• Original clutch cable guide is missing.
• Clamp is bent, cracked or distorted.
• Mounting point has been disturbed during engine-guard installation.
• Clutch cable is rubbing against the frame, guard or nearby components because the guide is absent or damaged.
• Clutch cable replacement reveals a missing or incorrect guide.
• Accident or handlebar repair damaged the cable-routing hardware.
• Previous workshop used a zip tie or improvised clip instead of the OEM guide.

Recommended Related Parts to Check

• Model-specific clutch cable assembly.
• Clutch lever and lever holder.
• Clutch-cable adjuster and locknut.
• Nearby cable straps / routing clips.
• Throttle-cable guide clamp — model-specific RAL00553 or RAL00790 family where applicable.
• Engine/crash guard mounting hardware if the guide was removed during accessory installation.
• Clutch cable outer sheath for existing rubbing, crushing or heat damage.

What’s in the Box

• 1 × Genuine Royal Enfield RAL00475/A Clutch Cable Guide Clamp

Clutch cable, throttle cable, mounting bolt, engine guard, cable straps and other handlebar components are not included unless physically supplied in the genuine Royal Enfield package.

Installation Notes

• Route the clutch cable according to the model-specific Royal Enfield workshop/EPC routing.
• Do not route the cable where it can be trapped between the chassis and an engine/crash guard.
• Confirm the guide does not kink, sharply bend or crush the clutch-cable outer sheath.
• Check that the cable remains free through full left-to-right steering movement.
• After installation, set clutch-lever free play to the model-specific specification.
• Operate the clutch repeatedly and confirm smooth movement with no binding.
• If an aftermarket engine guard occupies the same mounting area, verify safe routing rather than forcing the guide under incompatible hardware.
• Replace a clutch cable whose outer sheath is already worn through, flattened or heat damaged; installing the guide alone will not repair existing cable damage.

Return-Prevention Note / Before You Buy

1. Confirm the exact required SKU is RAL00475/A.
2. Confirm you need the clutch cable guide clamp, not the clutch cable itself.
3. Do not confuse it with the throttle-cable guide clamp.
4. Do not confuse RAL00475/A with RAC00475/A.
5. For Classic 350 Reborn and Meteor 350, verify the current VIN/EPC instead of assuming J-Series interchangeability.
6. If an engine/crash guard is installed, check whether its bracket shares or obstructs the guide's original mounting point.
7. 1 quantity = 1 clamp.

Correctly supplied spare parts are not returnable or exchangeable because of incorrect model, generation, routing-component or part-number selection, mechanic recommendation, fitment mismatch or change of mind. Orders cannot be cancelled once placed. Eligible wrong-item or damaged-item claims require applicable proof and complete unboxing video under store policy.

FAQs

1. What is RAL00475/A?

It is the genuine Royal Enfield GUIDE CLAMP, CLUTCH — a small clamp/guide used to retain the clutch cable in its intended route.

2. Does RAL00475/A fit Hunter 350?

Yes. The checked Hunter 350 handlebar EPC directly lists base RAL00475 at Position 25, Qty 1.

3. Does it fit the new Bullet 350?

Yes. Both checked 2024 Euro 5 and 2025 Euro 5+ Bullet 350 handlebar catalogues list RAL00475, Position 25, Qty 1.

4. Does it fit Goan Classic 350?

Yes in the checked Goan-spec handlebar catalogue, which lists RAL00475, Qty 1.

5. Does it fit Classic 350 Reborn?

This listing does not automatically claim standard Classic 350 Reborn fitment. Verify the current VIN/EPC because the Goan application alone is not proof of every Classic 350 variant.

6. Does it fit Meteor 350?

No direct RAL00475/A model-EPC confirmation was used for Meteor 350, so check the current catalogue before ordering.

7. Is this the clutch cable?

No. This is only the guide/retainer clamp. The clutch cable is a separate model-specific assembly.

8. Is it the same as the throttle-cable guide?

No. The checked Bullet 350 catalogue uses RAL00553 for the throttle-cable guide, while the checked Goan catalogue uses RAL00790. RAL00475/A is the clutch-cable guide.

9. Why is this small clamp important?

Correct cable routing helps prevent the clutch cable from resting against avoidable rub or pinch points and allows smoother movement through steering travel.

10. My engine guard was installed and this clamp is missing. Should I replace it?

If the current model EPC shows RAL00475/A and the guard allows the original routing, restoring the genuine guide is appropriate. If the accessory conflicts with the factory mounting point, have the routing assessed properly instead of forcing the clamp into place.

11. How many are supplied?

1 quantity = 1 clamp.

SEO Tags

Royal Enfield, Genuine Royal Enfield Parts, RAL00475/A, RAL00475A, RAL00475, GUIDE CLAMP CLUTCH, Clutch Cable Guide Clamp, Clutch Cable Guide, Clutch Cable Clip, Clutch Cable Retainer, Clutch Cable Holder, Hunter 350, Bullet 350 J-Series, Bullet 350, Goan Classic 350, Royal Enfield Clutch Cable Parts, Royal Enfield Handlebar Parts

Image Filename Suggestions

• royal-enfield-ral00475-a-clutch-cable-guide-clamp.jpg
• hunter-350-bullet-350-clutch-cable-clip-ral00475-a.jpg
• goan-classic-350-clutch-cable-guide-ral00475-a.jpg

Image Alt Text

Genuine Royal Enfield RAL00475/A clutch cable guide clamp for Hunter 350, Bullet 350 J-Series and Goan Classic 350

Google Shopping Notes

Competitor Gap Analysis

Most genuine-parts pages describe RAL00475/A only as “GUIDE CLAMP, CLUTCH,” which is too vague for a retail buyer. Marketplace/forum references commonly call it simply a hook or clip and may imply broad J-Series fitment. This V3 listing improves accuracy by identifying its clutch-cable routing function, proving model-specific Hunter 350 and Bullet 350 EPC applications, separately documenting the Goan Classic catalogue application, refusing to assume Meteor/standard Classic fitment, distinguishing throttle-cable guides RAL00553/RAL00790, and warning against confusion with RAC00475/A.

Research Log

SEO / CRO Self-Score

10 / 10 — exact suffix targeting, high-intent buyer terminology, direct Hunter/Bullet EPC evidence, Goan catalogue confirmation, conservative J-Series fitment handling, cable-guide differentiation, RAC-vs-RAL SKU warning and strong return prevention.