Royal Enfield Hunter 350 Genuine Rear Subframe Assembly CED & Powder Coated RAF00671/C

The Royal Enfield RAF00671/C Rear Subframe Assembly is a genuine structural frame component for compatible Hunter 350 motorcycles. Royal Enfield describes it as a Subframe Assembly – CED & Powder Coated.

The subframe forms the rear supporting structure of the motorcycle and provides mounting points for associated components such as the seat, rear bodywork, grab rails, tool-kit strap and selected exhaust-support parts. It is separate from the main frame assembly.

What This Product Is

• Genuine Royal Enfield rear subframe assembly
• Model-specific structural component for the Hunter 350
• CED-treated and powder-coated surface finish
• Base parts-book number: RAF00671
• Current genuine revision: RAF00671/C
• Normal catalogue quantity: one

What This Product Is Not

• Not the main frame assembly
• Not a complete motorcycle chassis
• Not supplied with the seat, rear mudguard, grab rails or side panels
• Not supplied with every bolt, nut, washer, cap, damper or bracket unless physically included in the sealed pack
• Not a universal subframe for other Royal Enfield J-Series models
• Not a direct replacement for a Classic 350, Meteor 350, Bullet 350 or Goan Classic 350 subframe

Key Features

• Genuine Royal Enfield OEM structural spare
• Correct factory mounting geometry for the Hunter 350
• CED and powder-coated finish for durable surface protection
• Supports the original rear-seat and bodywork arrangement
• Suitable for accident repair and replacement of a bent or damaged subframe
• Direct replacement where the model-specific frame catalogue lists RAF00671

Confirmed Compatibility

Fitment Requiring Verification

Not Compatible / Do Not Order For

• Classic 350 Reborn
• Goan Classic 350
• Meteor 350
• Bullet 350 J-Series
• Classic 350 UCE
• Bullet 350 UCE
• Thunderbird 350 or 500
• Himalayan 411 or Scram 411
• Himalayan 450 or Guerrilla 450
• Interceptor 650, Continental GT 650 or other Royal Enfield 650 models

Part Number and Revision Notes

Important Difference: Main Frame vs Subframe

RAF00671/C is the detachable rear subframe assembly. It must not be confused with RAF01196, which is the separate main frame assembly. Confirm which structure is bent or damaged before ordering.

Related Hunter 350 Frame Parts

When Should This Subframe Be Replaced?

• The rear frame section is bent after an accident or fall
• Seat or body-panel mounting points no longer align correctly
• A welded joint or mounting lug is cracked
• Grab rails or rear bodywork cannot be secured correctly
• The structure is heavily corroded or physically damaged
• The existing subframe has been cut, drilled or incorrectly modified
• A workshop inspection confirms that repair would not safely restore alignment

What You Will Receive

1 × Genuine Royal Enfield Hunter 350 Subframe Assembly, CED & Powder Coated – RAF00671/C

The main frame, seat, rear mudguard, grab rails, seat lock, tool-kit strap, heel guard, blanking caps, dampers, bolts, nuts, washers, electrical parts and body panels are not included unless physically present inside the sealed Royal Enfield pack.

Installation Note

• Structural frame replacement should be performed by an experienced motorcycle repair technician.
• Confirm the motorcycle VIN and model year before opening the pack.
• Inspect the main frame and all subframe mounting points for distortion or cracks.
• Check the rear suspension, swingarm, wheel alignment and exhaust mounting after an accident.
• Support the motorcycle securely before removing the rear structure.
• Transfer only serviceable brackets, dampers, caps and hardware.
• Replace stretched, bent, corroded or damaged mounting bolts and nuts.
• Align the subframe without forcing it against damaged main-frame mounts.
• Tighten all structural fasteners to Royal Enfield specifications.
• Verify seat, rear mudguard, grab rail, exhaust and body-panel alignment before road use.

Shipping and Inspection Note

This is a large structural component. Inspect the package for transit damage before accepting or opening it. Record a complete unboxing video showing the sealed package, label, all sides of the subframe and every mounting point. Do not install a component that is visibly bent, dented, cracked or damaged in transit.

Return-Prevention Note

This listing is for the Hunter 350 rear subframe assembly only. It is not the main frame or a complete chassis. Before ordering, confirm the motorcycle model, model year, VIN, damaged component, mounting geometry and factory pack number RAF00671/C. Structural parts showing installation marks, tightened fastener marks, modification, repainting or workshop damage may not be eligible for return under the applicable store policy.

Frequently Asked Questions

Is RAF00671/C a genuine Royal Enfield part?

Yes. Genuine Royal Enfield parts references describe it as the Subframe Assembly CED & Powder Coated.

Which motorcycle is confirmed?

The Royal Enfield Hunter 350 is confirmed by its model-specific frame parts catalogue.

Does it fit Hunter 350 Retro and Metro variants?

The 2022 Hunter parts catalogue states that it covers all Hunter models and colour schemes and lists one RAF00671 subframe. For later production years, confirm the VIN before dispatch.

Does it fit the 2025 or 2026 Hunter 350?

The available 2025 and 2026 Dapper Grey frame catalogues continue to list RAF00671. Other colours should be verified against the VIN because the available Euro 5+ catalogue coverage is incomplete.

Is this the main frame?

No. The main frame is a separate component listed under RAF01196.

Does it include the grab rails and seat lock?

No. The left and right grab rails and seat-lock latch assembly are separately catalogued parts.

Are the mounting bolts included?

Do not assume so. The frame bolts, nuts and washers are shown separately in the model catalogue.

What does CED and powder coated mean?

It describes the factory-applied protective surface treatment and outer coating used on the subframe assembly.

Can a bent subframe be installed and pulled into position using the bolts?

No. A structural component should align with undamaged mounting points without being forced. The main-frame mounts must be inspected if alignment is incorrect.

Buyer Search Terms

RAF00671, RAF00671/C, RAF00671C, Royal Enfield Hunter 350 subframe, Hunter 350 rear frame, Hunter 350 rear chassis frame, Hunter 350 seat frame, Hunter 350 sub frame assembly, Royal Enfield HNTR rear subframe.