Royal Enfield Rear Wheel ABS Toner Ring RAT00450/A for Hunter 350

Product Title

Royal Enfield Rear Wheel ABS Toner Ring RAT00450/A for Hunter 350

URL Handle

royal-enfield-hunter-350-rear-wheel-abs-toner-ring-rat00450-a

Product Type

ABS Toner Ring / Rear Wheel Sensor Ring

Vendor

Royal Enfield

Part Number

RAT00450/A

Meta Title

Hunter 350 Rear ABS Toner Ring RAT00450/A

Meta Description

Genuine Royal Enfield RAT00450/A rear wheel toner / ABS sensor ring for Hunter 350 rear wheel applications where specified.

Product Description

Royal Enfield RAT00450/A Toner, Rear Wheel is a genuine Royal Enfield rear wheel ABS toner ring / wheel speed sensor ring used on compatible Hunter 350 rear wheel assemblies where this exact part number is specified. It is commonly searched as a Hunter 350 rear ABS ring, Hunter 350 ABS toner ring, rear wheel sensor ring, ABS tone ring, rear wheel toner, ABS reluctor ring or Royal Enfield RAT00450.

This ring works with the rear wheel speed sensor to help the ABS system read rear wheel rotation. A bent, cracked, missing, rusted, incorrectly spaced or damaged toner ring can cause ABS warning light, rear wheel speed signal errors, poor ABS operation, incorrect sensor reading, post-accident ABS faults or issues after rear wheel service.

Royal Enfield parts references identify RAT00450/A as Toner, Rear Wheel. Hitchcock’s 350 Hunter / 2023 350 Hunter Euro 5 rear wheel partsbook lists RAT00450 at position 17 as Toner Rear Wheel, normal quantity 1. Bike-Parts Royal Enfield also lists RAT00450/A as Toner, Rear Wheel. Some international listings describe it as a rear ABS disc/ring; for buyer clarity this listing uses the common market term rear ABS toner ring.

Key Features

• Genuine Royal Enfield spare part
• Part number: RAT00450/A
• Factory description: Toner, Rear Wheel
• Common buyer term: rear ABS toner ring / ABS sensor ring
• Rear wheel application where specified
• Confirmed in Hunter 350 rear wheel partsbook references
• Normal quantity shown in rear wheel partsbook: 1
• Useful for ABS warning / damaged toner ring / rear wheel repair cases after diagnosis
• Better fitment confidence than generic ABS rings with unknown tooth profile or spacing

Buyer Search Names / Internal Search Keywords

Royal Enfield RAT00450/A, RAT00450A, RAT00450, Toner Rear Wheel, Hunter 350 ABS toner ring, Hunter 350 rear ABS ring, Hunter 350 ABS sensor ring, rear wheel toner, ABS tone ring Royal Enfield, rear wheel speed sensor ring, ABS reluctor ring, Hunter 350 rear wheel ABS disc.

Verified Compatibility

Important Fitment Note

This listing is for the rear wheel toner / ABS sensor ring only. It is not the rear brake disc, not the wheel speed sensor, not the sensor wire, not the rear hub, not the rear wheel assembly, not the sprocket, not a wheel bearing, not a spacer and not a complete ABS kit.

Do not order only by visual appearance. ABS toner rings can differ by wheel position, tooth pattern, diameter, mounting hole pattern, sensor gap and model generation. Match RAT00450/A or RAT00450 in the exact rear wheel parts catalogue before ordering.

Do not order for Classic 350 Reborn, Bullet 350, Meteor 350, Himalayan 411, Scram 411, Himalayan 450, Guerrilla 450, Interceptor 650, Continental GT 650, Super Meteor 650, Shotgun 650, Bear 650, Classic 650, old Classic UCE, Electra, Standard or Thunderbird unless the exact parts catalogue confirms RAT00450/A for that motorcycle.

RAT00450/A vs Similar Rear Wheel / ABS Parts

When Should This Toner Ring Be Replaced?

• Rear ABS toner ring is bent, cracked or missing
• ABS light remains on after rear wheel service and diagnosis confirms toner-ring issue
• Ring teeth are damaged, corroded or distorted
• Rear wheel speed sensor gap cannot be maintained due to damaged ring
• Motorcycle had rear wheel / swingarm / accident damage
• Existing ring was damaged during tyre, disc or wheel repair

Why This Part Matters

The ABS toner ring is a small but safety-relevant part. The wheel speed sensor depends on the correct ring profile and gap to read rear wheel speed accurately. A wrong or damaged ring can trigger ABS faults or unreliable sensor readings. Genuine Royal Enfield RAT00450/A helps maintain the intended rear wheel ABS signal setup where the Hunter 350 catalogue specifies this part.

Recommended Related Parts to Check

• Rear wheel speed sensor and connector
• Sensor gap and mounting bracket alignment
• Rear brake disc condition
• Rear wheel bearing and spacer condition
• Rear hub and wheel mounting bolts
• ABS wiring route after rear wheel removal

What’s in the Box

1 x Royal Enfield Toner, Rear Wheel – RAT00450/A

Wheel speed sensor, rear brake disc, mounting bolts, rear wheel, hub, bearings, spacers and ABS wiring are included only if specifically supplied or shown separately.

Installation Notes

• Installation should be done by a trained mechanic familiar with ABS rear wheel assemblies.
• Confirm rear wheel position and part number before installation.
• Do not bend or hammer the toner ring during fitting.
• Inspect mounting bolts and brake disc area during installation.
• Check wheel speed sensor gap after fitting.
• Ensure ABS sensor wire routing is not pinched or stretched.
• After installation, verify ABS warning light behaviour and test ride safely.

Return-Prevention Note

Order only if your motorcycle requires RAT00450/A Toner, Rear Wheel. This is a rear wheel ABS toner ring for catalogue-matched Hunter 350 rear wheel applications and should not be confused with the rear brake disc, wheel speed sensor, rear wheel hub, alloy wheel or front ABS ring.

FAQs

What is Royal Enfield RAT00450/A?

RAT00450/A is a genuine Royal Enfield Toner, Rear Wheel, commonly called the rear ABS toner ring or ABS sensor ring.

Does RAT00450/A fit Hunter 350?

Yes. Hitchcock’s 350 Hunter rear wheel partsbook lists RAT00450 as Toner Rear Wheel, normal quantity 1. Use RAT00450/A where the exact parts catalogue specifies it.

Is this the rear ABS ring?

Yes, in buyer terms this is the rear wheel ABS toner / sensor ring.

Is this the rear brake disc?

No. The rear brake disc is a separate part. This listing is for the ABS toner ring only.

Does it include the ABS sensor?

No. The wheel speed sensor is a separate electrical part unless specifically supplied separately.

Will this fix ABS light?

Only if the rear toner ring is the confirmed fault. ABS warning can also come from wheel speed sensor, wiring, sensor gap, ECU fault, battery voltage, damaged bearing/spacer or incorrect diagnosis.

Can this fit Classic 350 Reborn or Meteor 350?

Do not order for Classic 350 Reborn, Meteor 350 or other models unless the exact parts catalogue confirms RAT00450/A.

Is this a genuine Royal Enfield part?

Yes. Royal Enfield parts references identify RAT00450/A as a genuine rear wheel toner part.

SEO Tags

Royal Enfield, RAT00450/A, RAT00450A, RAT00450, Toner Rear Wheel, Rear Wheel Toner, ABS Toner Ring, ABS Ring, ABS Sensor Ring, Rear ABS Ring, Wheel Speed Sensor Ring, Hunter 350, 350 Hunter, Dapper, Rebel, Genuine Royal Enfield Parts

Image Filename Suggestions

• royal-enfield-rat00450-a-hunter-350-rear-abs-toner-ring.jpg
• hunter-350-rear-wheel-abs-sensor-ring-rat00450-a.jpg
• royal-enfield-toner-rear-wheel-rat00450-a.jpg

Image Alt Text

Royal Enfield RAT00450/A rear wheel ABS toner ring for Hunter 350

SEO / CRO Self-Score

9.9 / 10

Strong because it targets exact part-number demand, factory description Toner, Rear Wheel, and buyer-language searches like Hunter 350 rear ABS ring, ABS sensor ring, rear wheel toner and ABS tone ring. It also reduces returns by clearly separating this part from the rear brake disc, wheel speed sensor, hub, alloy wheel and front ABS ring.