1 0

    Royal Enfield

    Royal Enfield Interceptor 650 & Continental GT 650 TDC Locking Tool - Crank ST30300/A

    Royal Enfield Interceptor 650 & Continental GT 650 TDC Locking Tool - Crank ST30300/A

    Rs. 0.00
    Rs. 0.00
    Sale Sold out
    Shipping calculated at checkout.
    Important Order Policy
    Please order only after confirming the part number, model, variant, year, side, connector type and compatibility. All orders are non-cancellable once placed. Correctly shipped spare parts are not eligible for return, exchange or refund due to wrong selection, wrong diagnosis, fitment mismatch, mechanic recommendation or change of mind. Electrical/electronic items are additionally non-returnable once opened, installed, plugged in, tested or used. Wrong item, damaged item or missing item claims require a complete unboxing video within 24 hours. Read full Return & Warranty Policy

    Royal Enfield Interceptor 650 & Continental GT 650 TDC Locking Tool - Crank ST30300/A

    Royal Enfield ST30300/A TDC Locking Tool - Crank is a genuine Royal Enfield special service tool used for crankshaft / TDC locking during engine timing, service and repair work on catalogue-matched Royal Enfield 650 Twin engine applications. It is commonly searched as Interceptor 650 TDC tool, Continental GT 650 crank locking tool, 650 Twin TDC lock tool, crankshaft locking tool, engine timing tool or Royal Enfield special tool ST30300/A.

    Short Hook

    Genuine Royal Enfield crank TDC locking tool for Interceptor 650 and Continental GT 650 engine timing and service work where ST30300/A is specified in the special tools list.

    What This Product Is

    • Genuine Royal Enfield special service tool
    • Part number: ST30300/A
    • Factory description: TDC Locking Tool - Crank
    • Used to lock / locate the crank at TDC during specified engine service procedures
    • Workshop tool for mechanics, technicians and Royal Enfield service setups
    • Confirmed for 650 Twin special-tool use where the service tool list specifies ST30300/A

    What This Product Is Not

    • Not a motorcycle running spare part
    • Not fitted permanently on the motorcycle
    • Not a crankshaft, crank bolt, crank sensor or engine internal part
    • Not a cam TDC aligning plate
    • Not a magneto puller, clutch holder or compression adaptor
    • Not a universal timing tool for every Royal Enfield engine

    Key Features

    • Original Royal Enfield special tool number ST30300/A
    • Factory description: TDC Locking Tool - Crank
    • Designed for crank / TDC locking procedures where the service manual specifies this tool
    • Useful for accurate engine timing work and workshop repair procedures
    • Important for reducing incorrect makeshift-tool usage during engine work
    • Suitable for professional mechanics and serious Royal Enfield workshops

    Buyer Search Names / Internal Search Keywords

    Royal Enfield ST30300/A, ST30300A, ST30300, Interceptor 650 TDC tool, Continental GT 650 TDC tool, 650 Twin TDC locking tool crank, TDC lock tool, crank TDC lock tool, crankshaft locking tool, engine timing tool, timing lock tool, Royal Enfield special tool.

    Confirmed Compatibility

    Model / Engine Family Tool Use Fitment / Use Status Important Note
    Royal Enfield Interceptor 650 / Interceptor 650 Twin 650 Twin engine special tool Confirmed where ST30300/A is listed in the special tools section Tool for service procedure, not a fitted spare part
    Royal Enfield Continental GT 650 650 Twin engine special tool Confirmed where ST30300/A is listed in the special tools section Tool for service procedure, not a fitted spare part

    Fitment Not Confirmed / Check Before Ordering

    Model / Engine Status Reason to Check
    Super Meteor 650 Check before ordering Use only where the latest service/special tools list specifies ST30300/A.
    Shotgun 650 Check before ordering Use only where the latest service/special tools list specifies ST30300/A.
    Bear 650 / Classic 650 Check before ordering Confirm by latest catalogue or service tool list before ordering.
    Classic 350 Reborn / Bullet 350 J-Series / Meteor 350 / Hunter 350 Not confirmed Different engine family; order only if the service tool list specifies ST30300/A.
    Himalayan 450 / Guerrilla 450 Not confirmed Different engine platform; do not assume common timing tools.
    Himalayan 411 / Scram 411 Not confirmed Different engine platform; do not assume common timing tools.
    Older UCE 350 / 500 models Not confirmed Different engine family; verify the workshop manual special tool list.

    Not Compatible / Do Not Order For

    • Customers looking for a crankshaft spare part
    • Customers looking for a crank position sensor or crank bolt
    • Customers looking for ST30260/A Cam - TDC Aligning Plate
    • Customers looking for ST30274/A Magneto Puller Assembly
    • Customers looking for ST30259/A Adaptor - Compression Checking
    • Any Royal Enfield model where the service tool list does not specify ST30300/A
    • General DIY use without the correct service manual procedure

    Part Number / Supersession Notes

    • Base part searched: ST30300
    • Confirmed full part number: ST30300/A
    • Search variants: ST30300A, ST-30300/A, ST 30300/A
    • No interchange with other special tools should be assumed.
    • Use only where the Royal Enfield service procedure or special tools list specifies ST30300/A.

    Similar Parts Comparison

    Part Number Description Do Not Confuse With
    ST30300/A TDC Locking Tool - Crank This listing; crank/TDC locking tool
    ST30260/A Cam - TDC Aligning Plate Cam alignment plate, not the crank locking tool
    ST30274/A Magneto Puller Assembly Puller tool, not a TDC locking tool
    ST30259/A Adaptor - Compression Checking Compression test adaptor, not a crank lock tool

    When Should This Be Used?

    • During engine timing work where the crank must be held at TDC
    • During workshop procedures that specifically call for ST30300/A
    • When servicing 650 Twin engine timing-related components
    • When a workshop wants the correct Royal Enfield special tool instead of makeshift locking methods

    Recommended Related Parts to Check

    • ST30260/A Cam - TDC Aligning Plate if cam timing alignment is also being performed
    • Relevant 650 Twin service manual procedure before starting engine work
    • Gaskets, seals and fasteners required for the specific engine repair job
    • Torque tools required for reassembly

    What’s in the Box

    • 1 unit genuine Royal Enfield ST30300/A TDC Locking Tool - Crank
    • Cam aligning plate, other special tools, service manual, bolts, gaskets and engine parts are not included unless separately mentioned

    Installation / Usage Notes

    • This is a workshop special tool, not a bolt-on motorcycle spare.
    • Use only according to the Royal Enfield service manual procedure for the relevant engine.
    • Incorrect use can damage engine components or disturb timing.
    • Recommended for trained mechanics and professional workshops.

    Return-Prevention Note

    Order this part only if the required special tool is ST30300/A TDC Locking Tool - Crank. This is not a running spare, not a crankshaft, not a crank sensor, not the cam TDC aligning plate and not a universal Royal Enfield timing tool. Check the service manual or special tools list before ordering.

    FAQs

    What is Royal Enfield ST30300/A?

    ST30300/A is a genuine Royal Enfield TDC Locking Tool - Crank used as a special workshop tool during specified engine service procedures.

    Is this a spare part fitted on the motorcycle?

    No. This is a service tool used during repair or timing work. It is not permanently fitted on the motorcycle.

    Does this fit Interceptor 650 and Continental GT 650?

    It is listed in 650 Twin special tools references for Interceptor 650 and Continental GT 650 engine service work where ST30300/A is specified.

    Can this be used for Super Meteor 650 or Shotgun 650?

    Use it only where the latest service tool list or workshop procedure specifies ST30300/A for that model.

    Is this the same as ST30260/A?

    No. ST30300/A is the crank TDC locking tool. ST30260/A is the cam TDC aligning plate.

    Can I use it for Classic 350, Bullet 350, Meteor 350 or Hunter 350?

    Do not order for 350 models unless the exact service tool list specifies ST30300/A. These motorcycles use different engine families.

    Is this suitable for DIY use?

    This is a workshop-level special tool. It should be used with the correct service manual procedure by someone experienced with engine timing work.

    SEO Tags

    Royal Enfield, Genuine Royal Enfield Parts, Royal Enfield ST30300/A, ST30300/A, ST30300A, ST30300, TDC Locking Tool, TDC Lock Tool, TDC Lock Tool Crank, Crank Locking Tool, Crankshaft Locking Tool, Engine Timing Tool, Timing Lock Tool, Special Tool, Royal Enfield Special Tool, 650 Twin Special Tool, Interceptor 650, Interceptor 650 Twin, Continental GT 650, GT 650, 650 Twins

    Image Alt Text Suggestions

    • Royal Enfield ST30300/A TDC locking tool crank for Interceptor 650 and Continental GT 650 engine service
    • Royal Enfield crankshaft locking tool ST30300/A special tool
    • Royal Enfield 650 Twin TDC lock tool crank ST30300/A

    Google Shopping Notes

    • Brand: Royal Enfield
    • MPN: ST30300/A
    • Condition: New
    • Product category: Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
    • Custom product: False

    Verify Fitment on Official Brand Portals

    For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.

    Royal Enfield Official Spares Portal

    Hero MotoCorp Official eCatalogue

    View full details