1 0

    Royal Enfield

    Royal Enfield Interceptor 650 / Continental GT 650 Throttle Body Adaptor 576041/C

    Royal Enfield Interceptor 650 / Continental GT 650 Throttle Body Adaptor 576041/C

    Rs. 0.00
    Rs. 0.00
    Sale Sold out
    Shipping calculated at checkout.
    Important Order Policy
    Please order only after confirming the part number, model, variant, year, side, connector type and compatibility. All orders are non-cancellable once placed. Correctly shipped spare parts are not eligible for return, exchange or refund due to wrong selection, wrong diagnosis, fitment mismatch, mechanic recommendation or change of mind. Electrical/electronic items are additionally non-returnable once opened, installed, plugged in, tested or used. Wrong item, damaged item or missing item claims require a complete unboxing video within 24 hours. Read full Return & Warranty Policy

    Royal Enfield Interceptor 650 / Continental GT 650 Throttle Body Adaptor 576041/C

    Royal Enfield 576041/C Adaptor, Throttle Body is a genuine Royal Enfield throttle body adaptor / inlet-manifold adaptor used in the throttle body and inlet manifold section of compatible Interceptor 650 and Continental GT 650 applications where this exact part number is specified.

    This part sits in the intake / throttle-body area. It should be ordered only when the old part, packet label, repair estimate or parts catalogue confirms 576041/C or base part code 576041. On the 650 Twin throttle-body diagram, this adaptor is used as a pair, so many motorcycles may require 2 pieces when replacing both sides.

    What This Product Is

    • Genuine Royal Enfield spare part
    • Full part number: 576041/C
    • Base/search part number: 576041
    • Description: Adaptor, Throttle Body
    • Throttle body adaptor / intake-manifold adaptor for 650 Twin EFI applications where specified
    • Located in the throttle body and inlet manifold area
    • Normally shown as quantity 2 in the 650 Twin throttle-body diagram

    What This Product Is Not

    • Not the complete throttle body assembly
    • Not the injector assembly
    • Not the throttle cable
    • Not the throttle position sensor
    • Not the common rail
    • Not the bracket, clip, screw or packing around the throttle body
    • Not a carburettor intake rubber
    • Not for Classic 350, Bullet, Meteor, Hunter, Himalayan, Guerrilla, Super Meteor, Shotgun or Bear unless exact EPC confirms 576041/C

    Key Features

    • Original Royal Enfield part number 576041/C
    • Factory description: Adaptor, Throttle Body
    • Used in Interceptor 650 and Continental GT 650 throttle body / inlet manifold applications where listed
    • Important intake-side sealing and mounting component around the throttle body
    • Useful for replacing cracked, hardened, leaking or damaged throttle-body adaptors
    • Clear return-prevention notes to avoid confusion with complete throttle body, throttle cable and other EFI parts

    Buyer Search Names / Internal Search Keywords

    Royal Enfield 576041/C, 576041, adaptor throttle body, adapter throttle body, throttle body adaptor, throttle body adapter, throttle body manifold adapter, intake manifold adapter, inlet manifold adapter, Interceptor 650 throttle body adaptor, Continental GT 650 throttle body adaptor, INT 650 intake adaptor, GT 650 intake manifold, 650 Twins throttle body rubber.

    Confirmed Compatibility

    Application / Model Family Part Location / Use Status Important Note
    Interceptor 650 Twin Euro 4 Throttle body and inlet manifolds Confirmed Use where old part / parts catalogue confirms 576041/C.
    Continental GT 650 Euro 4 Throttle body and inlet manifolds Confirmed Use where old part / parts catalogue confirms 576041/C.
    650 Interceptor Euro 5 throttle-body adaptor diagram Throttle body adaptor, position 1 Base code supported Diagram shows base code 576041, normal quantity 2; confirm exact supplied suffix before dispatch.
    650 Twins applications listing 576041 / 576041/C Adaptor, Throttle Body Confirmed part identity Use exact part-number confirmation for final dispatch.

    Fitment Not Confirmed / Do Not Mix Up

    Customer Search / Requirement Status for 576041/C Why It Matters
    Classic 350 / Bullet / Electra / Thunderbird UCE Not compatible unless EPC confirms These are different engine and intake systems; many older models use carburettor or different EFI parts.
    Classic 350 Reborn / Meteor 350 / Hunter 350 / Bullet J-Series Do not assume J-Series 350 throttle-body adaptor references are different; do not match by name.
    Himalayan 411 / Scram 411 Do not assume Different LS410 engine and intake layout.
    Himalayan 450 / Guerrilla 450 Do not assume Different Sherpa 450 engine platform and different throttle-body parts.
    Super Meteor 650 / Shotgun 650 / Bear 650 / Classic 650 Do not assume Other 650 platforms can use different airbox, intake and fitment layouts. Match EPC before dispatch.
    Customer asking for complete throttle body Not this part This is only the adaptor, not the full throttle body assembly.
    Customer asking for one side only Check quantity The 650 Twin diagram shows normal quantity 2; confirm whether customer needs one piece or both sides.

    Similar Parts Comparison

    Part Number / Search Term Description Order When
    576041/C Adaptor, Throttle Body 650 Twin throttle body adaptor is required.
    576041 Base part code for same throttle body adaptor family Parts diagram or customer search uses base number without suffix.
    RLT00053 Throttle Body Assembly reference family Complete throttle body assembly is required, not only the adaptor.
    576263 Clip, Adapter Only the adaptor clip is required.
    576354 Bracket, Throttle Body Throttle body bracket is required.
    576047 series Throttle cable assembly / twin cable reference family Throttle cable is required, not intake adaptor.

    When Should This Be Replaced?

    • Adaptor is cracked, hardened, split or deformed
    • Air leak is suspected around the throttle body / inlet manifold area
    • Adaptor is damaged during throttle-body removal or intake service
    • Motorcycle has unstable idle caused by intake leak after proper diagnosis
    • Old part / EPC / repair estimate confirms 576041/C
    • Both sides are being refreshed during throttle body / intake work

    Recommended Related Parts to Check

    • Second throttle body adaptor if replacing both sides
    • Adaptor clips / clamps
    • Throttle body assembly condition
    • Throttle cable routing and adjustment
    • Injector O-rings and injector clips if the injector area is disturbed
    • Common rail packing / screws if removed during service
    • Airbox and intake duct sealing

    What’s in the Box

    • 1 genuine Royal Enfield 576041/C Adaptor, Throttle Body
    • Quantity supplied is one piece unless otherwise mentioned
    • Throttle body, clips, brackets, screws, injectors, sensors, cables and other intake parts are not included unless physically supplied with the packet

    Installation Notes

    • Confirm the exact part number and model diagram before fitting.
    • Check whether the motorcycle needs one piece or two pieces before dispatch.
    • Inspect mating surfaces and clamps before installation.
    • Do not force-fit if the diameter, angle or mounting position does not match the old adaptor.
    • After installation, check for intake leaks, idle stability and throttle-body seating.
    • Professional installation is recommended for EFI intake and throttle-body work.

    Return-Prevention Note

    Important: 576041/C is an Adaptor, Throttle Body for catalogue-matched 650 Twin throttle-body / inlet-manifold applications. It is not the complete throttle body, not the throttle cable, not the injector, not a sensor and not a universal intake rubber. Match the old part number, model, diagram position and required quantity before ordering.

    FAQs

    What is Royal Enfield 576041/C?

    576041/C is a genuine Royal Enfield Adaptor, Throttle Body used in compatible throttle body and inlet manifold applications.

    Does this fit Interceptor 650?

    Yes, Interceptor 650 Twin Euro 4 is confirmed for this part in the throttle body and inlet manifold section. Other years should be checked by EPC/old part before dispatch.

    Does this fit Continental GT 650?

    Yes, Continental GT 650 Euro 4 is confirmed for this part in the throttle body and inlet manifold section. Other years should be checked by EPC/old part before dispatch.

    How many pieces are required?

    The 650 Twin throttle-body adaptor diagram shows normal quantity 2. This listing is for one piece unless the packet or product option specifically says otherwise.

    Is this the complete throttle body?

    No. This is only the throttle body adaptor / intake adaptor. The complete throttle body assembly is a separate part.

    Can this fit Classic 350 or Bullet 350?

    No fitment is claimed. Classic/Bullet/J-Series/UCE motorcycles should be matched by their own exact throttle-body or intake part number.

    Is this the same as the J-Series 350 throttle body adaptor?

    No. J-Series 350 applications use different part-number families. Do not mix 650 Twin and J-Series throttle-body adaptors.

    SEO Tags

    Royal Enfield, Genuine Royal Enfield Parts, Royal Enfield 576041/C, 576041/C, 576041, Adaptor Throttle Body, Adapter Throttle Body, Throttle Body Adaptor, Throttle Body Adapter, Throttle Body Manifold Adapter, Intake Manifold Adapter, Intake Rubber Adapter, Inlet Manifold Adapter, Interceptor 650 Throttle Body Adaptor, Interceptor 650 Throttle Body Adapter, Continental GT 650 Throttle Body Adaptor, Continental GT 650 Throttle Body Adapter, 650 Twins Throttle Body Adaptor, INT 650 Throttle Body Adaptor, GT 650 Throttle Body Adaptor, Royal Enfield 650 Twins, Fuel Injection Part, EFI Intake Part, Throttle Body And Inlet Manifolds, Not Complete Throttle Body, Check Before Ordering

    Image Filename Suggestions

    • royal-enfield-576041-c-interceptor-650-throttle-body-adaptor.jpg
    • royal-enfield-continental-gt-650-throttle-body-adaptor-576041-c.jpg
    • genuine-royal-enfield-650-twins-intake-manifold-adaptor-576041-c.jpg

    Image Alt Text Suggestions

    • Royal Enfield 576041/C throttle body adaptor for Interceptor 650 Continental GT 650
    • Genuine Royal Enfield 650 Twins throttle body intake adaptor 576041/C
    • Royal Enfield Interceptor 650 Continental GT 650 inlet manifold adaptor 576041/C

    Google Shopping Notes

    • Brand: Royal Enfield
    • MPN: 576041/C
    • Condition: New
    • Product category: Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
    • Custom product: False

    Verify Fitment on Official Brand Portals

    For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.

    Royal Enfield Official Spares Portal

    Hero MotoCorp Official eCatalogue

    View full details