Royal Enfield Interceptor 650 & Continental GT 650 Genuine Exhaust Mounting Stud 576323/C

The Royal Enfield 576323/C Exhaust Mounting Stud is a genuine OEM threaded fastener used in the factory exhaust mounting arrangement of compatible Interceptor 650 and Continental GT 650 motorcycles.

It provides the original threaded mounting point for the exhaust components shown in the model-specific parts catalogue. Replace it when the original stud is bent, corroded, seized, stripped, missing or damaged during exhaust removal.

What This Product Is

• Genuine Royal Enfield exhaust mounting stud
• Factory description: Stud Exhaust Mounting
• Current part number supplied under this listing: 576323/C
• Base catalogue number: 576323
• Threaded exhaust-system mounting fastener
• This listing supplies one stud

What This Product Is Not

• Not a complete stud set
• Not an exhaust header pipe
• Not a silencer or muffler
• Not an exhaust gasket
• Not the 3rd-mount washer 576324/D
• Not the exhaust damper pin 576298/D
• Not the rubber exhaust damper 576297/D
• Not supplied with a nut, washer or gasket unless physically present inside the sealed pack
• Not a universal stud selected only by visual appearance

Key Features

• Genuine Royal Enfield OEM fastener
• Correct factory-style threaded stud
• Designed for the compatible 650 Twin exhaust mounting arrangement
• Suitable for exhaust repair, silencer replacement and restoration
• Helps restore secure exhaust alignment when the original stud is damaged
• Direct replacement where the model-specific parts catalogue lists 576323

Confirmed Compatibility

Quantity Note

The Interceptor 650 and Continental GT 650 exhaust parts diagrams normally show four 576323 studs per complete motorcycle exhaust assembly. This listing supplies one stud. Inspect all mounting points and order the required quantity.

Fitment Requiring Verification

Not Compatible / Do Not Order For

• Classic 350 Reborn
• Meteor 350
• Hunter 350
• Bullet 350 J-Series
• Goan Classic 350
• Classic 350 or 500 UCE
• Bullet or Electra UCE
• Thunderbird 350 or 500
• Himalayan 411 or Scram 411
• Himalayan 450 or Guerrilla 450
• Continental GT 535

Part Number and Revision Notes

Order and dispatch according to the exact code on the genuine pack. Do not create separate duplicate listings for every suffix unless the physical specification is confirmed to be different.

Related 650 Twin Exhaust Mounting Parts

When Should This Stud Be Replaced?

• The original stud is bent
• The threads are stripped, flattened or cross-threaded
• The stud is heavily corroded or seized
• It breaks during exhaust removal
• The exhaust cannot be aligned or tightened correctly
• The original mounting hardware is missing
• A new OEM or aftermarket exhaust is being installed and the existing stud is not serviceable

What You Will Receive

1 × Genuine Royal Enfield Exhaust Mounting Stud – 576323/C

Nuts, washers, dampers, pins, gaskets, silencers, header pipes, guards and other exhaust hardware are not included unless physically present inside the sealed Royal Enfield pack.

Installation Note

• Allow the engine and exhaust system to cool completely.
• Confirm the old stud or parts catalogue specifies 576323.
• Inspect the receiving thread and surrounding mounting point for damage.
• Remove corrosion and old locking compound without damaging the parent thread.
• Start the new stud by hand to prevent cross-threading.
• Use the Royal Enfield workshop procedure and specified installation torque.
• Do not grip and damage the working threads with unsuitable pliers.
• Replace damaged washers, nuts, dampers and exhaust seals at the same time.
• Align the complete exhaust before final tightening.
• Check for exhaust leakage, vibration and loose hardware after installation.

Return-Prevention Note

This listing supplies one 576323/C exhaust mounting stud. Before ordering, confirm the motorcycle, model year, emission version, mounting position, existing stud and quantity required. A similar-looking stud can have a different diameter, pitch, length or material specification.

Fasteners showing installation marks, damaged threads, tool marks, locking compound or use may not be eligible for return under the applicable store policy.

Frequently Asked Questions

Is 576323/C a genuine Royal Enfield part?

Yes. It is a genuine Royal Enfield exhaust mounting stud.

Which motorcycles are confirmed?

Royal Enfield Interceptor 650 and Continental GT 650 are confirmed through their model-specific exhaust and cylinder-head parts catalogues.

Does the listing contain one stud or four?

One stud. The complete Interceptor / Continental GT exhaust diagram normally lists four, so select the quantity needed for the repair.

Is 576323/C the same type of part as 576298/D?

No. 576323/C is the threaded mounting stud. 576298/D is a separate damper pin used with the rubber exhaust mounting system.

Does the washer come with it?

No. The related 3rd-mount washer is separately listed as 576324/D.

Does it fit Super Meteor 650?

Do not assume fitment solely because it uses the 648cc engine. Confirm the VIN-specific exhaust or cylinder-head catalogue before ordering.

Can it be used with an aftermarket exhaust?

Only when the aftermarket system retains the original 576323 mounting specification. Check the exhaust manufacturer's fitting instructions.

Should all studs be replaced together?

Not always. Replace every stud that is bent, corroded, seized or has damaged threads. Inspect all mounting points whenever the exhaust is removed.

Does it include the mounting nut?

No. This listing is for the stud only.

576323, 576323/C, 576323C, 576323/B, Royal Enfield exhaust mounting stud, Interceptor 650 exhaust stud, Continental GT 650 exhaust stud, INT 650 exhaust mounting bolt, GT 650 header stud, Royal Enfield 650 exhaust fixing stud.