Royal Enfield Meteor, Classic, Hunter & Bullet 350 Bar-End Mirror Mounts – KXA00125

Install compatible genuine Royal Enfield bar-end mirrors correctly on the J-Series 350 handlebar with this genuine mounting kit. Part number KXA00125 replaces the motorcycle’s original bar-end finishers and provides the proper machined clamping surface required by the mirrors.

This listing is for the mounting adapters and supplied fasteners only. Bar-end mirrors— including genuine mirror set 1990401—are sold separately.

What This Product Is

• Genuine Royal Enfield Bar End Mirror Mounting Kit
• Exact accessory part number / MPN: KXA00125
• Precision-machined stainless-steel mounting adapters
• Replaces the original handlebar-end finishers on compatible motorcycles
• Provides the correct mounting surface for compatible bar-end mirrors
• Designed as a bolt-on accessory using the included application-specific fasteners
• Normal published installation time: approximately 15 minutes

Key Benefits

• Allows genuine bar-end mirrors to clamp securely to the J-Series 350 handlebar ends
• Maintains a clean factory-accessory installation
• Avoids makeshift spacers and universal expanding adapters
• Supplies both left- and right-side mounts
• Includes the two specified fastener styles used by the fitting system
• Can be removed later if the motorcycle is returned to its original mirror arrangement

Confirmed Compatibility

Model years are a general production guide and can differ by country or registration date. Confirm the handlebar-end construction, exact mirror kit and VIN-specific accessory instructions before opening the package.

Not Automatically Compatible With

• Older UCE Classic 350/500, Bullet 350/500 or Electra models
• Thunderbird, Thunderbird X or Himalayan 411
• Interceptor 650 or Continental GT 650—the KXA00125 adapter is not normally required for the standard 1990401 installation on these models
• Super Meteor 650, Shotgun 650, Classic 650 or Bear 650, which can use different mounting adapters
• Himalayan 450, Guerrilla 450, Scram 440 or other models using a different bar-end system
• Universal or third-party mirrors whose clamp diameter and fixing arrangement have not been matched
• Aftermarket handlebars, altered internal weights or previously modified bar ends

Package Contents

The fitting instructions determine which supplied fixing is used for the motorcycle and mirror configuration. Do not assume that every loose fastener in the kit must be installed.

Not Included

• Bar-end mirrors, including part number 1990401
• Original-style stem mirrors
• Mirror-hole blanking plugs
• Handlebar, grips, throttle tube or switchgear
• Replacement bar-end weights not listed in the kit
• Workshop tools or installation labour

Technical Details

How the Mounting Kit Works

The original handlebar-end finisher is removed from each side. A KXA00125 adapter is positioned inside the compatible bar-end mirror to create the correct flange and clamping surface. The mirror and adapter are then secured to the handlebar end using the fixing specified for that application.

Because bar-end mirror designs differ, the presence of a circular clamp does not make every aftermarket mirror compatible with this kit.

Pre-Purchase Checklist

1. Confirm your motorcycle is one of the listed J-Series 350 models.
2. Confirm the intended mirror instructions specify mount kit KXA00125.
3. Check whether you are ordering mirror set 1990401 separately.
4. Inspect both handlebar ends for original finishers, internal weights and previous modifications.
5. Confirm that the handlebar, grips and throttle tube are standard.
6. Check which supplied M6 × 40 mm fastener the official instructions specify.
7. Do not order solely because an aftermarket mirror advertisement mentions Royal Enfield.

Installation Notes

• Use the fitting instructions supplied for both the motorcycle and the selected mirror set.
• Protect the fuel tank, switchgear and painted parts before working on the handlebar.
• Remove the original bar-end finishers without damaging the internal thread.
• Ensure the adapter flange faces the direction shown in the mirror fitting instructions.
• Use the correct supplied fastener for the exact application.
• Apply only the specified tightening torque and thread treatment.
• Check that the throttle grip returns freely and does not bind against the mirror or adapter.
• Position both mirrors for a clear rearward view before final tightening.
• Recheck mirror security and throttle operation before every ride.
• Professional installation is recommended if the handlebar ends have been modified or damaged.

Important Return-Prevention Note

Verify the motorcycle, handlebar, intended mirrors and complete part number before opening the package. A correctly supplied mounting kit is not returnable or refundable after opening, installation, tool marks, threadlocker application, scratched finish, thread damage, modification or use.

Record one continuous unboxing video from the sealed outer parcel through inspection of the package label and every component. Report any wrong, missing or transit-damaged item within 24 hours of delivery with the video, labels, photographs and original packaging.

Frequently Asked Questions

1. What is KXA00125?

It is the genuine Royal Enfield mounting-adapter kit used to install compatible bar-end mirrors on specified J-Series 350 motorcycles.

2. Are the mirrors included?

No. This listing contains the mounts and supplied fasteners only.

3. Which genuine mirrors are these designed for?

Royal Enfield identifies bar-end mirror set 1990401 as a compatible separately purchased mirror set.

4. Is this kit sold as a pair?

Yes. The fitting information shows two mounting adapters, one for each handlebar end.

5. Does it fit Meteor 350?

Yes, for the standard J-Series Meteor 350 when fitting a compatible genuine bar-end mirror kit.

6. Does it fit Classic 350 Reborn?

Yes, subject to the standard handlebar-end arrangement and compatible mirror selection.

7. Does it fit Hunter 350?

Yes. KXA00125 appears in the genuine Hunter 350 accessory system.

8. Does it fit the new Bullet 350?

Yes, for the 2023-on J-Series Bullet 350 with the standard handlebar-end arrangement.

9. Does it fit an older UCE Classic or Bullet?

No compatibility is claimed for older UCE motorcycles.

10. Is it required for Continental GT 650?

It is not normally required for the standard 1990401 mirror installation on the Continental GT 650. Follow the mirror instructions for that motorcycle.

11. Does it fit Interceptor 650?

Do not order it automatically for the Interceptor 650; verify the exact mirror and handlebar-end instructions first.

12. Does it fit Super Meteor or Shotgun 650?

No. Those models can require a different adapter or fitting arrangement.

13. Will it fit universal aftermarket mirrors?

Compatibility is not guaranteed. Clamp diameter, adapter profile and fixing arrangement must all match.

14. What material are the mounts?

Royal Enfield specifies stainless steel.

15. What fasteners are included?

The published kit contents show two countersunk M6 × 40 mm and two cap-head M6 × 40 mm fixings.

16. Why are two different bolt styles supplied?

The correct fixing depends on the motorcycle and mirror configuration. Use only the fixing specified in the instructions.

17. Are blanking plugs for the original mirror holes included?

No inclusion is promised; obtain suitable plugs separately if required.

18. How long does installation take?

Royal Enfield publishes an approximate fitting time of 15 minutes for a standard, unmodified motorcycle.

19. Can I return the kit after test fitting?

No. A correctly supplied kit is not returnable after opening, installation marks, threadlocker or modification.

20. What proof is needed for a damage claim?

Keep a continuous unboxing video, package labels, photographs and original packaging, and report the issue within 24 hours.