Royal Enfield KAB00635/A – Rear Brake Pad Kit (ByBre/Brembo) for Himalayan 450 & Guerrilla 450 – Genuine OEM Rear Disc Pads

The Royal Enfield KAB00635/A Rear Brake Pad Kit is the genuine OEM rear disc pad set for the new Himalayan 450 (H450) and Guerrilla 450 built on the Sherpa 452 platform. BRAKE PAD KIT – REAR”, confirming it as the factory rear pad kit. Multiple European dealers describe it as a pair of original rear brake pads KAB00635/A for Himalayan 450 E5 / MY2024, Rear brake pads for Himalayan 450 and Guerrilla 450, firmly tying this part to the Sherpa 450 models only. 

These pads are designed to work with the bikes’ 270 mm rear disc, single-piston caliper and dual-channel ABS system, providing stable rear braking support in city traffic, highway touring and off-road conditions. Being OEM, the pad shape, thickness and compound exactly match the stock ByBre/Brembo caliper, ensuring even rotor contact, low noise and predictable bite—unlike cheap aftermarket pads that can glaze or fade quickly. A popular Himalayan 450 brake-pad tutorial also identifies KAB00635 as the official rear pad part number, backing this fitment further.

If your Himalayan 450 or Guerrilla 450 feels weaker on the rear brake, needs more lever travel, or the pads are near the wear groove, replacing them with KAB00635/A keeps braking feel exactly as Royal Enfield intended—safe, consistent and adventure-ready.

Key Features 

• Genuine Royal Enfield rear brake pad kit – Part No. KAB00635 / KAB00635/A, listed as “BRAKE PAD KIT – REAR” 

• Verified OEM pads for Himalayan 450 (H450) and Guerrilla 450 Sherpa platform 

• Engineered for the 270 mm ventilated rear disc, single-piston caliper and dual-channel ABS setup 

• ByBre/Brembo-spec friction compound for strong, progressive rear braking and good heat resistance 

• Direct fit in the stock rear caliper – no shims, grinding, or “jugaad” fitment required

• Helps restore braking performance when rear pads are worn, glazed or contaminated

• Reduces risk of rotor damage thanks to correct OEM pad hardness and backing-plate profile

• Ideal for touring, trail riding and daily commuting where controlled rear braking is critical

• Supplied as a matched pair of pads for one rear caliper – replace as a complete set

Compatibility Table

PLEASE CHECK PART NUMBER BEFORE PURCHASE

Variants:

• Single Variant:

  • KAB00635/A – Rear Brake Pad Kit / Brake Pad Assembly for Himalayan 450 & Guerrilla 450

(Front pads for these models use KAB00612/A and should be purchased separately.)

FAQs 

Q1. Is KAB00635/A for front or rear brakes?
KAB00635/A is the rear brake pad kit. OEM listings clearly label it as “BRAKE PAD KIT – REAR” for the Sherpa 450 platform. 

Q2. Will these pads fit my Himalayan 450?
Yes. Multiple European dealers describe KAB00635/A as a pair of original rear brake pads for Himalayan 450 E5 / MY2024, and Indian sellers list it as rear pads for Himalayan 450. 

Q3. Are they also compatible with Guerrilla 450?
Yes. “Rear Brake Pads Himalayan 450 and Guerrilla 450” in its Sherpa 450 parts category, which corresponds to this part number. 

Q4. Do I need to change the rotor when I replace pads?
Not usually. As long as the rotor is within thickness spec and not badly scored or warped, you can fit new OEM pads. Have your mechanic inspect disc thickness and surface during pad replacement.

Q5. Are these better than local aftermarket pads?
For a premium ADV like Himalayan 450/Guerrilla 450, OEM pads maintain the correct brake balance, ABS calibration and rotor life. Cheaper pads may fade faster, wear the disc prematurely or change braking feel.