Royal Enfield Bullet 500 RH High Tone Horn Kit with Bracket & Bolts – KAC00015/A Genuine OEM

Genuine Royal Enfield Right-Hand High-Tone Horn Kit

Restore the original right-hand high-tone horn mounting arrangement with Royal Enfield kit KAC00015/A. This factory-listed kit combines the K95 high-tone (HT) horn, right-hand horn bracket, bolt and spring washer as specified in the kit breakdown. It is a sound horn: the factory phrase “High beam horn kit RH” should not be understood as a high-beam headlight, headlamp horn switch or lighting accessory.

Designed for motorcycle owners restoring a damaged, missing, loose or non-original right-side horn installation on compatible older UCE-era Royal Enfield motorcycles. Verify the exact horn arrangement, bracket revision, frame fixing and electrical connection before ordering.

Part Identification

OEM Kit Component Breakdown

The component list is the supplied kit bill of materials, not evidence of the sealed packet’s individual hardware quantities. Additional wires, connectors, low-tone horn, relay and left bracket are not listed.

Motorcycle Compatibility — Evidence-Based

Not Established / Do Not Order Without OEM Confirmation

Do not assume this RH UCE-era horn kit fits Meteor 350, Hunter 350, new Classic 350 Reborn/J-Series, new Bullet 350 J-Series, Himalayan 411/450, Guerrilla 450, Interceptor/Continental GT 650, Super Meteor 650, Shotgun 650, Classic 650 or Bear 650. Shared horn sound or similar two-pin appearance is not enough to prove bracket, clearance, wiring or vehicle fitment.

High Tone vs Low Tone — How to Choose

HT / high tone: 591981/A, usually fitted on the right-hand side of applicable twin-horn layouts. LT / low tone: 591980/A, a separate lower-pitched horn used on the opposite side in applicable installations. The kit does not contain both horns. The high-tone horn alone will not duplicate the original two-tone sound of a complete matched pair.

What This Kit Is Not

• Not a headlight or high-beam switch kit.
• Not a dual-horn pair or full twin-horn retrofit.
• Not the LH low-tone horn or LH mounting bracket.
• Not a horn relay/wiring-harness conversion or aftermarket loud-horn set.
• Not proof of compatibility across all UCE bikes or newer generations.

When To Replace / Troubleshooting

Consider replacement if the original right-hand horn is physically damaged, corroded, silent after correct circuit testing, or mounted on a bent/missing bracket. Before replacing, check battery voltage, fuse, horn switch, earth/ground, connectors and any relay or harness issue. A horn failing to sound does not always mean the horn unit itself is defective.

Installation & Electrical Precautions

1. Verify the vehicle VIN, original RH horn part number and mounting-bracket revision.
2. Disconnect power safely and inspect the existing horn wiring and connector polarity/terminal arrangement.
3. Compare the supplied bracket orientation, bolt, washer and clearance with the existing assembly; check tank, front mudguard and crash-guard clearance.
4. Secure the horn without straining its terminals, route wiring away from moving/hot parts and confirm normal horn operation.
5. Use the correct motorcycle service manual for tightening procedures; no unverified torque figure is provided here.

Professional electrical and mechanical installation is recommended.

Before You Buy — Avoid A Wrong Order

This listing identifies the exact KAC00015/A kit and its four referenced parts. For older UCE models beyond directly documented Bullet 500 assemblies, confirm the complete kit using the vehicle VIN/EPC, existing bracket shape, horn location and wiring. A part appearing in another model’s catalogue does not automatically prove the complete kit fits that model.

Electrical/electronic components must be checked against the exact part number, connector, motorcycle generation and EPC before opening or installation. Electrical items are non-returnable once opened, connected, installed or tested. Correctly supplied spare parts are generally not returnable for wrong selection, incorrect diagnosis or change of mind. Wrong-item, damaged-item or missing-item claims require a complete unboxing video and must be raised within 24 hours of delivery. Orders cannot be cancelled once processing has begun, subject to applicable policies.

Frequently Asked Questions

Is this a high-beam headlight kit?

No. The catalogue calls it a high beam horn kit, but the supplied components show it is the RH high-tone sound horn kit.

Which side does it fit?

The RH (right-hand) horn mounting position on the applicable vehicle.

Does it contain both horns?

No. Only the high-tone RH horn appears in the component breakdown; the LH low-tone horn is separate.

Is it suitable for Bullet 500 UCE?

The Bullet 500 illustrated twin-horn assembly strongly supports the horn, RH mounting bracket and fixing arrangement. Verify the exact revision and VIN.

Will it fit Bullet 350 UCE?

Related RH horn-bracket applications exist, but the complete KAC00015/A kit has not been independently proven for every Bullet 350 UCE variant; verify with VIN/EPC.

Will it fit Classic 350 UCE or Classic 500 EFI?

Related components appear in older UCE applications. Confirm the full kit against the exact original horn and RH bracket.

Will it fit Thunderbird 350 or 500?

The horn 591981/A is shown for Thunderbird models, but its OEM RH bracket is a different reference, so this complete kit must not be assumed to fit.

Does this fit the new Classic 350 Reborn?

No direct evidence supports its use on the new J-Series; do not order without an exact OEM application.

Is mounting hardware included?

The OEM breakdown names a bolt 586002/C and washer 586038/C. Their sealed-pack quantities and any additional fasteners must be confirmed.

Does it include a horn relay or wiring harness?

No relay or wiring harness is listed in the kit breakdown.

Will this fix a silent horn?

Only if the failed component is in this kit. Test battery, switch, wiring, ground and fuse before purchase.

Is 591980/A interchangeable with 591981/A?

No. 591980/A is the separate low-tone horn reference, while this kit lists the RH high-tone 591981/A.

Search Names & Related Parts

Royal Enfield high tone horn, Bullet 500 RH horn kit, Classic 350 UCE horn, Classic 500 twin horn, K95 HT horn 591981/A, RH horn mounting bracket 592968/C, Bullet original horn assembly, Royal Enfield right side horn, Royal Enfield KAC00015/A.

Related references to compare only: 591980/A (LH low-tone horn), 592969/B (LH bracket), 592968/B (another RH bracket revision), KAC00017/A (separate horn clamp kit). Do not infer interchangeability.

Image / Google Shopping Guidance

Suggested image filenames: royal-enfield-kac00015-a-right-high-tone-horn-kit.jpg; bullet-500-591981-a-rh-horn-bracket-kit.jpg. Alt text: Genuine Royal Enfield KAC00015/A high tone right-hand horn kit; 591981/A horn with 592968/C RH mounting bracket. Google Shopping: brand Royal Enfield; MPN KAC00015/A; new condition; motorcycle electrical horn component.