Royal Enfield Magneto Puller Assembly ST30274/A Special Tool

Royal Enfield ST30274/A Magneto Puller Assembly is a genuine Royal Enfield factory special tool used for magneto / flywheel removal work where this specific service tool is required. It is commonly searched as a magneto puller, magneto puller assembly, flywheel puller, alternator puller, Royal Enfield special tool or Royal Enfield workshop tool.

This is not a normal motorcycle spare part fitted permanently on the bike. It is a workshop/service tool used by mechanics during engine-side electrical or magneto-related repair work. A correct puller is important because the magneto / rotor area can be damaged if removed using hammering, incorrect universal pullers, pry bars or locally modified tools.

Use this genuine Royal Enfield special tool only where ST30274/A or ST30274 is specified in the service-tool requirement. It is not a magneto assembly, not a stator coil, not a rotor, not a regulator-rectifier, not a battery, not a complete tool kit, and not a universal puller for every Royal Enfield engine.

This listing is intentionally written as a factory workshop special tool listing rather than a vehicle-fitment spare part listing. Special tools may be referenced in service-tool partsbooks for engine service procedures and should be selected by the tool number, not by guessing from motorcycle model name.

Key Features

• Genuine Royal Enfield special tool
• Part number: ST30274/A
• Part family reference: ST30274
• Factory description: Magneto Puller Assembly
• Used for magneto / flywheel puller service applications where this tool number is specified
• Commonly searched as magneto puller, flywheel puller, alternator puller and factory service tool
• Useful for professional workshops, service centres, restoration garages and advanced mechanics
• Helps reduce the risk of damaging magneto/rotor parts during removal
• Correct tool-number matching gives better service confidence than universal pullers
• Designed for service-tool use, not as a permanently fitted motorcycle part

Buyer Search Names / Internal Search Keywords

Customers may also search this part as: Royal Enfield ST30274/A, ST30274A, ST30274 magneto puller, Royal Enfield magneto puller, magneto puller assembly, flywheel puller Royal Enfield, alternator puller Royal Enfield, Royal Enfield factory tool, Royal Enfield special tool, Royal Enfield workshop service tool, Royal Enfield magnet puller, Royal Enfield rotor puller.

Verified Identification

Important Fitment / Application Note

This listing is for a special service tool, not a vehicle-mounted spare part. It should be purchased by workshops, mechanics or technically informed buyers who need ST30274/A Magneto Puller Assembly for the correct Royal Enfield service procedure.

Do not order this as a magneto replacement part. It is not the magneto assembly, not the stator, not the flywheel/rotor, not the magneto cover, not a gasket, not a bearing puller, not a crank puller, not a clutch puller, and not a universal puller for all motorcycles.

Before purchase, match the exact service tool number ST30274/A with the service manual or workshop requirement. Different Royal Enfield engines and service operations may use different special tools with similar names.

When Should This Tool Be Used?

• During magneto / flywheel removal where the service manual specifies ST30274/A or ST30274
• When a workshop needs the correct factory-style puller instead of a universal puller
• During engine-side electrical repair that requires magneto/rotor removal
• During restoration work where correct special tools are preferred
• When avoiding damage caused by hammering, prying or incorrect puller use
• For professional Royal Enfield service setups and workshop inventory

Why This Tool Matters

Magneto and flywheel components can be tightly seated and sensitive to incorrect removal methods. Using the wrong tool can damage threads, distort the rotor, damage the crank end, affect magneto alignment or create expensive repeat repair work. A correct magneto puller helps apply pulling force in the intended way and supports cleaner workshop-level service.

For a spare-parts seller or professional workshop, stocking the correct Royal Enfield special tool also builds credibility because it shows the ability to support proper service procedures, not just sell replacement parts.

Recommended Related Checks Before Use

• Confirm the exact engine and service procedure before tool use
• Check service manual for the required special tool number
• Inspect magneto / rotor threads before installing the puller
• Do not use impact or excessive force unless the service procedure allows it
• Use correct supporting tools if the procedure requires crank or rotor holding
• Inspect the tool threads before and after use
• Keep the tool clean and lightly protected from corrosion during storage

What’s in the Box

1 x Royal Enfield Magneto Puller Assembly – ST30274/A

Magneto assembly, flywheel/rotor, stator, cover gasket, regulator-rectifier, battery, service manual, holding tools and other special tools are included only if specifically supplied or shown separately.

Usage Notes

• Use only for the service procedure where ST30274/A or ST30274 is specified.
• Clean and inspect tool threads before use.
• Ensure correct engagement before applying pulling force.
• Do not cross-thread the puller into the magneto/rotor area.
• Do not substitute this tool for a different Royal Enfield puller unless the service manual confirms it.
• Professional use is recommended because incorrect use can damage engine electrical components.

Return-Prevention Note

Order only if you need the ST30274/A Magneto Puller Assembly special tool. This is not a motorcycle spare part fitted to the bike and should not be ordered as a replacement magneto, stator, rotor or charging part. Match the service-tool number before purchase.

FAQs

What is ST30274/A?

ST30274/A is a genuine Royal Enfield Magneto Puller Assembly special service tool.

Is this a spare part fitted on the motorcycle?

No. This is a workshop/service tool used during magneto or flywheel removal procedures where the tool is specified.

Is ST30274/A the same as ST30274?

Public references list the tool as ST30274 and ST30274/A. Use the exact number required by the service manual or workshop instruction.

Is this the magneto assembly?

No. This is a magneto puller tool. Magneto assembly / stator / rotor parts are separate motorcycle components.

Can this be used as a universal flywheel puller?

No. Use it only where ST30274/A or ST30274 is specified. Different engines and motorcycles may need different pullers.

Who should buy this?

This tool is best suited for Royal Enfield workshops, mechanics, restoration garages and technically experienced owners performing service procedures that require this tool.

Can I use this without a service manual?

Professional use with the correct service procedure is recommended. Incorrect tool use can damage threads, rotor/flywheel parts or engine-side components.

Does it include the magneto or flywheel?

No. This listing includes the puller tool only unless specifically supplied or shown separately.

Is this a genuine Royal Enfield item?

Yes. This listing is for genuine Royal Enfield special tool part number ST30274/A.