Royal Enfield Meteor 350 Brown Touring Passenger Seat – KXA00068

Make two-up journeys more comfortable with the genuine Royal Enfield KXA00068 Brown Touring Passenger Seat for the Meteor 350. Designed specifically for the pillion position, this factory accessory uses a higher front surface to provide additional support around the passenger's lumbar area.

The passenger seat uses the same Royal Enfield 3D net technology as the Touring Rider Seat, helping distribute the passenger's weight more evenly across the cushion during longer journeys. Its brown colour is designed to coordinate with the separately available KXA00074 Brown Touring Rider Seat.

Important: this listing contains the brown passenger/pillion seat only. It is not a rider seat and it is not a complete rider-and-passenger seat set. The matching brown Touring Rider Seat, part number KXA00074, is sold separately.

What This Product Is

• Genuine Royal Enfield Brown Touring Passenger Seat
• Exact manufacturer part number / MPN: KXA00068
• Vehicle-specific passenger/pillion seat for Royal Enfield Meteor 350
• Higher front seat surface designed to support the passenger's lumbar area
• Touring-oriented cushion construction for longer two-up journeys
• Royal Enfield 3D net technology designed for more even weight distribution
• Brown colour for a coordinated factory-accessory appearance
• Direct replacement using the original passenger-seat mounting components

Key Features

• Designed specifically as a genuine accessory for the Meteor 350 passenger position
• Higher front profile provides additional support at the front of the pillion seating area
• 3D net seat technology is designed to spread passenger weight more evenly
• Touring-focused design intended to enhance support on longer journeys
• Brown finish coordinates with KXA00074 Brown Touring Rider Seat
• Replaces only the original passenger seat; the rider seat remains installed
• Uses the motorcycle's retained top-hat inserts and grab-rail mounting bolts
• No cutting, drilling or modification is required on a standard compatible motorcycle
• Official fitting time is approximately 10 minutes for a trained installer
• Manufacturer-listed three-year warranty, subject to applicable Royal Enfield terms

Confirmed Compatibility

Fitment is confirmed by Royal Enfield fitting instruction KXL00082 Issue A for Meteor 350 MY20 onwards. Confirm the exact motorcycle, passenger-seat position, brown colour and KXA00068 package label before opening or installation.

Not Compatible / Do Not Assume Fitment

• Hunter 350 / HNTR 350
• Classic 350, Goan Classic 350 or Bullet 350
• Older UCE Classic, Bullet, Electra or Thunderbird models
• Himalayan, Scram or Guerrilla models
• Interceptor 650, Continental GT 650, Super Meteor 650, Shotgun 650, Bear 650 or Classic 650
• Any non-Royal Enfield motorcycle
• Any Meteor 350 with modified, bent, repaired or accident-damaged passenger-seat mounts, grab rails or subframe

Do not order by colour, approximate width, engine platform or visual similarity. Passenger-seat fitment depends on the complete base pan, rear frame hook, front mounting holes, grommets, top-hat inserts and grab-rail boss geometry.

Passenger Seat, Rider Seat and Colour Guide

Passenger versus rider position and brown versus black colour are buyer-selected differences, not fitment defects. KXA00068 must identify a brown Touring Passenger Seat.

What You Will Receive

The official fitting procedure installs the passenger seat using the motorcycle's existing top-hat inserts and grab-rail mounting bolts. A rider seat, backrest, backrest mounting kit or separate hardware kit is not included.

Original Parts Reused / Not Included

• Original left and right grab-rail mounting bolts are removed and reused
• Original left and right top-hat inserts are removed and reused
• The original rider seat remains fitted and is not removed for this passenger-seat installation
• Brown Touring Rider Seat KXA00074 is not included
• Black Touring Passenger Seat KXA00067 is not included
• Passenger backrest, backrest mounting components and rear luggage rack are not included
• Tools, replacement fasteners, workshop consumables and installation labour are not included

Inspect the retained bolts, top-hat inserts, grommets, grab-rail bosses and frame mounting points before installation. Replace any missing, bent, stripped, corroded or damaged component with the correct genuine part.

Technical Details

Passenger Comfort Note

Royal Enfield describes a higher front surface to support the passenger's lumbar area and 3D net technology intended to distribute weight more evenly. These features are designed to enhance support on longer rides, but perceived comfort remains personal.

• Comfort varies with passenger height, body shape, weight, posture, clothing and journey duration.
• Road surface, tyre pressure and suspension preload also affect passenger comfort.
• No universal comfort improvement or fatigue reduction is guaranteed.
• No exact seat width, height increase, height reduction or foam-density specification is published here.
• The seat does not include a backrest and does not replace correct passenger handholds or protective riding equipment.
• The rider's seating surface is unchanged unless a Touring Rider Seat is purchased separately.

Installation Note

Royal Enfield lists an approximate fitting time of 10 minutes. KXA00068 follows the passenger-seat steps of instruction KXL00082; rider-seat removal steps are skipped. Installation by an authorised Royal Enfield workshop or qualified motorcycle technician is recommended.

1. Support the motorcycle securely on level ground and confirm the package label shows KXA00068.
2. Remove one cap-head bolt from the front grab-rail mounting point using a 6 mm hex bit, then repeat on the other side.
3. Retain both original mounting bolts for installation of the accessory seat.
4. Lift the front of the original passenger seat and unhook the rear of the seat from the frame.
5. Remove and retain the left and right top-hat inserts from the original passenger-seat grommets.
6. Do not remove the rider seat; instruction steps 3–6 are skipped for KXA00068.
7. Fit the retained top-hat inserts into the grommets of the new Brown Touring Passenger Seat.
8. Insert the accessory passenger seat's rear hook into the frame.
9. Lower the front of the seat and align both front mounting holes with the grab-rail bosses and frame.
10. Refit each retained cap-head bolt through the grab-rail boss and into the frame.
11. Tighten each mounting bolt to 25 Nm.
12. Confirm the seat is fully hooked, correctly aligned, secure and free from abnormal movement before carrying a passenger.

Always follow the latest instruction supplied with the seat. Stop installation if the seat hook, grommets, inserts, bolts, grab-rail bosses or frame holes do not match the documented arrangement.

Seat Care

• Clean with mild automotive shampoo, clean water and a soft microfibre cloth.
• Remove mud, dust, road salt, fuel, oil, sunscreen and chemical contamination promptly.
• Avoid abrasive brushes, bleach, harsh solvents and petroleum-based cleaners.
• Do not pressure-wash closely around seams, the seat edge, grommets or mounting points.
• Do not apply an unverified dressing that makes the passenger seating surface slippery.
• Allow the seat to dry naturally in a shaded, ventilated area; avoid concentrated heat.
• Inspect the cover, stitching, base pan, hook, grommets and mounting points during routine service.
• After any impact or fall, inspect the passenger seat, grab rails and subframe before carrying a passenger.

Fitment Note / Return Prevention

Before opening or fitting, confirm all four points: KXA00068, brown colour, passenger/pillion position and Royal Enfield Meteor 350. Do not confuse it with KXA00067 black passenger seat, KXA00074 brown rider seat or a complete two-seat set.

The fitting instruction specifies Meteor 350 MY20 onwards. This listing does not claim Hunter 350, Classic 350, Bullet 350 or Super Meteor 650 compatibility. A shared brand name or visually similar seat does not confirm fitment.

Seats are installation-sensitive and hygiene-sensitive products. Parts showing mounting impressions, bolt marks, scratches, stains, odour, torn packaging, altered brackets, road use or attempted installation may not qualify for return, subject to applicable law and the current store policy.

Record one continuous unboxing video showing the sealed parcel, shipping label, Royal Enfield label, KXA00068 part number, brown colour, complete seating surface, base pan, hook, grommets and mounting holes. Report a wrong, missing or transit-damaged item within 24 hours with the video and original packaging.

Frequently Asked Questions

1. What is Royal Enfield KXA00068?

It is the genuine brown Touring Passenger Seat designed for the Royal Enfield Meteor 350.

2. Is this the rider seat or passenger seat?

It is the passenger/pillion seat only. It is not a rider seat or a complete two-seat set.

3. Is KXA00068 brown or black?

KXA00068 is brown. KXA00067 is the related black Touring Passenger Seat.

4. Which motorcycle is officially compatible?

Royal Enfield fitting instruction KXL00082 specifies Meteor 350 MY20 onwards.

5. Does it fit all Meteor 350 colour variants?

The official application is Meteor 350 MY20 onwards. Motorcycle colour does not change the mounts, but confirm the original seating arrangement before ordering.

6. Does it fit Hunter 350?

No Hunter 350 fitment is claimed. The seat base and mounting arrangement are model-specific.

7. Does it fit Classic 350 or Bullet 350?

No. These motorcycles use different passenger-seat bases and model-specific part numbers.

8. Is the rider seat included?

No. Only the brown Touring Passenger Seat is supplied.

9. Which matching brown rider seat should I buy?

The matching brown Touring Rider Seat is KXA00074 and is sold separately.

10. What is the matching black passenger seat?

KXA00067 is the black Touring Passenger Seat for Meteor 350.

11. What is different from the standard passenger seat?

Royal Enfield specifies a higher front surface for passenger lumbar-area support and 3D net technology.

12. Is the seat wider or taller than standard?

Royal Enfield does not publish exact width or height differences on the current product page, so no dimension is claimed here.

13. Is passenger comfort guaranteed?

No. Comfort is subjective and depends on passenger build, posture, suspension setup, road conditions and journey duration.

14. Does the package include a backrest?

No. A backrest and its mounting hardware are not included.

15. Does the package include new mounting bolts?

No separate hardware kit is listed. The original top-hat inserts and grab-rail mounting bolts are reused.

16. Must the rider seat be removed?

No. The official instruction says to skip the rider-seat removal steps when installing KXA00068.

17. What torque is specified for installation?

Each retained grab-rail/passenger-seat mounting bolt is tightened to 25 Nm.

18. How long does fitting take?

Royal Enfield lists approximately 10 minutes for a trained installer with the correct tools.

19. Does Royal Enfield list a warranty?

Yes. The official product page lists a three-year warranty, subject to regional terms and applicable claim conditions.

20. Can it be returned after fitting?

An installed, marked, stained, scratched, incomplete or modified seat may not qualify for return. Confirm the SKU, colour, model and passenger-seat position first, subject to applicable law and the current store policy.