Royal Enfield Meteor 350 Clutch & Throttle Control Cables Kit – KAA00070/A Genuine OEM

Genuine Royal Enfield Meteor 350 Control Cables Kit – KAA00070/A

Looking for a Meteor 350 clutch cable and throttle cable service kit? Royal Enfield records part number KAA00070/A as a Control Cables Kit. The supplied kit-component breakdown identifies the exact clutch and throttle cable assemblies included in this kit. It is intended for servicing the original cable-operated controls on the compatible Meteor 350, subject to matching the motorcycle and the packet label.

Exact kit components: The supplied KAA00070/A kit breakdown lists 1100229/E – CLUTCH CABLE ASSY – J1D and 1100230/C – THROTTLE CABLE ASSY – J1D. These are the internal component part numbers for this kit, not merely other Meteor 350 cable references. No additional components are confirmed by the supplied breakdown.

Product identification

Exact component part numbers supplied in KAA00070/A

The supplied KAA00070/A – Control Cables Kit component breakdown identifies these two assemblies under the kit number. They are the actual kit item references, not suggested alternatives. The table lists one line for each assembly; the supplied extract does not contain an explicit numeric quantity field or identify any additional fittings.

Do not substitute earlier revisions: Other Meteor 350 clutch/throttle cable revisions appear in independent catalogues. Those earlier part numbers must not replace 1100229/E or 1100230/C in this kit's contents description.

Motorcycle compatibility — use the exact kit, not just a similar cable

Why not list all J-Series 350 motorcycles? Shared engine architecture does not establish matching clutch-cable length, throttle-cable construction, terminal type or routing. The available independent seller references for KAA00070/A identify the Meteor 350 specifically. Verify the genuine pack and the vehicle EPC before treating other motorcycles as compatible.

What does the kit contain?

The KAA00070/A kit breakdown supplied for this listing names two internal cable assemblies:

Selling unit: One KAA00070/A genuine control-cables kit containing the listed clutch and throttle cable assemblies. The supplied breakdown has one entry for each part, but no separate numeric quantity column; check the sealed pack if exact multiplicity or any accessories are critical.

Not specified as included: Throttle grip, clutch lever, housings, lubrication, mounting brackets or additional loose fasteners. Do not assume these are supplied.

What the control cables do

Clutch actuation

On a cable-operated clutch system, the clutch cable transmits lever movement to the clutch actuation mechanism. Wear, fraying, kinks, poor adjustment or routing interference may cause inconsistent operation. A hard clutch lever can also have other causes; diagnose before replacing components.

Throttle actuation

Throttle cable operation must be smooth, correctly routed and allow the throttle grip to return freely. Fraying, stiffness or damage can create a serious riding hazard. Never operate a motorcycle with a sticking throttle or incomplete return.

When should a cable kit be considered?

• Visible fraying or broken strands in an original control cable
• Kinks, damaged outer casing or corrosion around a cable end
• A clutch control that feels rough after correct diagnosis and adjustment
• A stiff or non-returning throttle caused by verified cable damage
• Accident or handlebar repair where the original cables were damaged
• Planned preventive replacement after inspection of old cables and fitment

Diagnostic note: Adjustment problems, dry lever pivots, damaged throttle tubes, switch housings, clutch mechanism faults and incorrect handlebar routing can mimic cable failure. Inspect the full system rather than replacing the kit blindly.

Before placing your order: five fitment checks

1. Confirm your motorcycle is a Meteor 350 and identify the specific factory variant and build year.
2. Compare the original cable end fittings, adjusters and cable routing against the genuine kit and OEM parts diagram.
3. Check whether a modified handlebar, riser or aftermarket throttle has changed the required cable length.
4. Verify the pack bears KAA00070/A and its internal cable part numbers match 1100229/E (clutch) and 1100230/C (throttle).
5. If ordering for a newer model year or a non-Meteor J-Series motorcycle, request EPC/VIN confirmation before purchase.

Installation and safety precautions

1. Have a qualified Royal Enfield technician inspect the old cable routing and attachment points before removal.
2. Compare the old and new cable lengths, adjusters, end nipples and bends before installing. Do not force an incorrect end into a lever or housing.
3. Follow the model-specific Royal Enfield workshop manual for cable routing and clutch or throttle adjustment.
4. Ensure no cable is pinched, overstretched, sharply bent or tensioned by full left and right steering lock.
5. For the throttle, check smooth full return with the engine switched off at straight-ahead and both full steering locks.
6. Check proper clutch free play to factory specification; do not guess an adjustment figure for unverified model revisions.
7. Inspect for interference with fuel tank, headlight brackets, wiring and accessories; test safely before road use.

Safety warning: An incorrectly routed or adjusted throttle cable can hold the throttle open. Never ride if the throttle sticks or fails to snap shut. A poorly adjusted clutch cable can cause dragging or slipping. Professional fitting is strongly recommended.

Comparison with related Royal Enfield parts

Frequently asked questions

Ordering and product-condition information

Under The Hood supplies Royal Enfield spare parts by stated SKU. Please verify fitment, package contents and condition before installation. Electrical/fitment and other returns are governed by the store’s published terms and applicable consumer law. Keep an uninterrupted parcel-opening video for any packaging or incorrect-item claim. Do not install a component that does not match your original part.

Technical source notes and verification limits

OEM identification: Royal Enfield parts price lists, including the February 2024 customer price list, give KAA00070/A = Control Cables Kit. Independent fitment/terminology: AE Spares and Enfieldcounty sellers describe this exact reference as a Meteor 350 clutch-and-throttle cable kit. Unverified: itemised genuine packet contents, internal sub-component SKUs, cable count, exact later-year revision interchangeability, and applications beyond Meteor 350. Those must be checked against current OEM EPC and stock packaging. The historical ₹380 price is not represented as a current MRP.