Royal Enfield Meteor 350 Headlight Lens & Reflector with Light Guide – RAN00329/A Genuine OEM

Genuine Royal Enfield Meteor 350 Headlight Lens and Reflector with Light Guide – RAN00329/A

Replace the specified headlamp optical unit on a compatible Royal Enfield Meteor 350 with genuine OEM part RAN00329/A. The factory calls it Lens and Reflector Assembly with Light Guide. In everyday buyer language this is the Meteor 350 headlight lens/reflector unit—the front-facing optical portion of the headlamp that houses the reflective surfaces and light-guide structure. It is not a complete headlight assembly and should not be ordered when the required repair is only a bulb, outer rim or headlamp housing.

The exact reference is documented in Royal Enfield genuine-parts listings and model-specific Meteor 350 Euro V headlamp diagrams. Order by the part number and original headlamp configuration; visually similar round headlamps on other Royal Enfield models are not proof of interchangeability.

Part identification and specification

What this product is—and what it is not

This product: the original-style optical lens-and-reflector subassembly with a light guide, identified by RAN00329/A. It sits within the wider Meteor 350 headlamp arrangement and is useful when the optical section itself needs an exact-part replacement.

Not included or not established as included: a complete headlight housing, chrome/black outer rim, H4 headlight bulb, bulb shield, dust cap, headlamp bowl, aiming brackets, headlamp wiring loom, clips, springs, fasteners or a separate LED headlamp conversion. Each of several surrounding parts has a different OEM number. Do not order this part expecting a ready-to-install complete lamp.

Confirmed motorcycle compatibility

Fitment depends on the original headlamp assembly, not just on the Meteor 350 name. Manufacturers may change lighting components during model-year revisions or between markets. The part references above relate to documented conventional Meteor 350 headlamp assemblies; verify later LED or redesigned configurations separately.

Do not order solely by resemblance for these motorcycles

• Classic 350 Reborn / J-Series: a similar circular headlight does not establish RAN00329/A fitment.
• Hunter 350, new Bullet 350 J-Series, Goan Classic 350: exact optical assembly compatibility not established.
• Himalayan 411, Himalayan 450, Guerrilla 450, Scram 411/440: different platforms; no verified complete application.
• Interceptor 650, Continental GT 650, Super Meteor 650, Shotgun 650, Classic 650, Bear 650: no verified RAN00329/A application.

Headlamp parts comparison: choose the correct spare

These are part-number comparisons for identifying nearby catalogue items, not a promise that every item or mounting part is included with RAN00329/A. If you need the full headlamp, identify its complete OEM assembly SKU rather than assembling a purchase based only on this list.

When should you consider replacing the lens and reflector?

• Cracked, broken or visibly damaged optical lens or reflector section.
• Damaged internal reflective surface or light-guide area that cannot be restored through appropriate cleaning.
• Headlamp optical unit physically damaged after a collision or impact.
• A confirmed optical-assembly defect where the bulb, wiring, connectors and other headlamp parts have been checked separately.

Dim or non-working headlights can also be caused by a defective bulb, low voltage, connection issue, switch, fuse or incorrect aiming. Do not assume RAN00329/A will repair every weak-headlight or non-illumination problem. An electrician or trained mechanic should diagnose the cause before replacing a comparatively expensive optical component.

What you receive

1 × Genuine Royal Enfield Lens and Reflector Assembly with Light Guide, part RAN00329/A. This is the individual factory-named assembly, not a pair or full lighting kit. Only items physically attached to the factory-supplied assembly can be assumed to arrive with it. The current sealed packet has not been inspected for additional loose fittings, so no bulb, rim, wiring or screws are promised.

Installation and safety notes

• Check the original assembly and part-number identification before opening the replacement packet.
• Turn off ignition and isolate power safely according to the correct workshop procedure.
• Remove the external rim and surrounding components using the appropriate Meteor 350 service instructions. Keep track of the original fasteners and retaining parts.
• Avoid touching or scratching the reflector surface, stressing the light guide or contaminating the optical assembly.
• Check original H4 bulb seating, bulb shield, spring clips and wiring independently; reuse only undamaged, compatible fittings.
• Reassemble the headlamp and verify both low- and high-beam operation as well as any relevant position-light function.
• Check and adjust headlight alignment to the workshop specification so the beam does not dazzle oncoming traffic.
• Do not drill, trim, rewire or force the assembly into a different headlamp housing.

Professional installation recommended. No installation torque or connector pin-out has been given because the exact fastener-level workshop specification was not verified for this part.

Important buying checks and return prevention

Before placing the order, confirm RAN00329/A is the part called for by your motorcycle VIN/EPC. Compare the original reflector shape, headlamp type, light-guide provision and mounting points. If your motorcycle has a different factory LED headlight design or a modified aftermarket headlamp, do not rely on the Meteor model name alone.

Under The Hood supplies genuine replacement spares by exact part number. Correctly supplied items are generally not returnable for wrong model selection, wrong diagnosis or change of mind, subject to applicable law and the published store policy. Maintain a complete unboxing video for any wrong-item, shipping-damage or missing-item claim and report issues promptly under the applicable policy. Electrical/lighting components that have been opened, connected, installed or tested may be subject to additional return restrictions as published by the store.

Frequently asked questions

1. Does RAN00329/A fit the Meteor 350?

Yes, the exact part is documented in Meteor 350 Euro V Fireball, Stellar and Supernova headlamp catalogues. Confirm the individual VIN and headlamp specification.

2. Is this the entire headlight?

No. It is the lens-and-reflector optical assembly with light guide. The external rim, bulb, housing and other parts are separately identified in the catalogue.

3. Does it come with an H4 bulb?

The H4 bulb has its own part number RAN00199/A. Its inclusion with RAN00329/A has not been verified, so do not assume a bulb is supplied.

4. Does it include the headlamp outer rim?

No outer rim is established as included. RAN00327/A is a separate catalogue component.

5. Does it have a light guide?

Yes. The exact Royal Enfield OEM description explicitly states lens and reflector assembly WITH LIGHT GUIDE.

6. Is this an LED headlight conversion kit?

No. It is a replacement optical subassembly for an appropriate original headlamp; it is not sold as a universal LED upgrade.

7. Does it fit all Meteor 350 model years?

Not established. Euro V Fireball, Stellar and Supernova applications are documented; later revisions or alternate lighting specifications require VIN/EPC matching.

8. Will this fit the Classic 350 Reborn?

No exact-part fitment has been verified for Classic 350 Reborn. Do not assume compatibility because both motorcycles are J-Series 350s.

9. Can it be used on Hunter 350 or Bullet 350?

These models are not confirmed for RAN00329/A. Match each bike to its own headlamp parts catalogue.

10. Is RAN00329/A a genuine Royal Enfield part?

Yes. Genuine Royal Enfield parts catalogues list this exact SKU and description.

11. Can I buy only the reflector rather than the complete headlamp?

This SKU is the catalogue-listed lens-and-reflector subassembly. Compare the desired replacement to the physical original before purchasing.

12. What if my headlight is dim?

Check the bulb, voltage supply, wiring, connectors, switch and alignment first. Replacing the reflector does not necessarily cure an electrical fault.

13. Are screws and mounting springs included?

Separate catalogue numbers exist for the shield screw and rim spring. Their inclusion in the sealed RAN00329/A packet is not confirmed.

14. Is the lens glass or plastic?

I could not verify the exact material from an authoritative factory specification for this revision, so no material claim is made.

15. Do I need professional installation?

Recommended, especially to avoid optical surface damage, incorrect bulb seating, wiring damage and misaligned beam pattern.

16. What details should I send before ordering?

Send the motorcycle model/variant, year, VIN or relevant EPC reference and clear photographs of the existing headlamp and original part identification.

Search names and related terms

Royal Enfield Meteor 350 headlight lens; Meteor 350 headlamp reflector; Meteor 350 front light glass; Meteor headlight reflector with light guide; Meteor 350 lamp optical unit; Meteor 350 OEM headlight spare; RAN00329/A; RAN00329; genuine Meteor 350 lighting parts. “Glass” is used here only as a common customer search term, not as a verified material specification.

Image identification and alt-text recommendations

• Meteor 350 genuine headlight lens and reflector light guide RAN00329/A – front view
• Royal Enfield RAN00329/A Meteor 350 headlamp optical assembly – rear view
• Meteor 350 reflector and light guide original OEM part number RAN00329/A – package label
• Royal Enfield Meteor 350 headlight lens reflector replacement – side mounting detail

Why order from Under The Hood?

Under The Hood helps Royal Enfield owners identify genuine motorcycle spares by exact OEM part number rather than vague visual resemblance. For a headlamp optical component, matching the actual motorcycle generation, headlamp arrangement and OEM revision is important. Order RAN00329/A only when your original headlamp specification requires this lens-and-reflector-with-light-guide assembly.