Genuine Royal Enfield Super Meteor 650 Rear Wheel ABS Toner Ring RAB00013/B – Shotgun, Classic 650 & Bullet 650

Genuine Royal Enfield part number RAB00013/B, factory description ABS TONER RING, REAR WHEEL. This is the toothed rear-wheel reference ring used with the ABS wheel-speed sensor to help the motorcycle read rear-wheel rotation correctly. Buyers may also search for it as an ABS tone ring, rear ABS ring, reluctor ring, wheel-speed ring or ABS sensor ring.

Use this genuine replacement when the original ring is bent, distorted, missing or physically damaged during wheel, tyre, brake-disc or accident repair work, and the exact part number has been confirmed. OEM matching matters because tooth pattern, ring diameter, mounting layout and the sensor relationship must match the motorcycle's rear wheel. The ring itself is passive mechanical hardware; it is not the electronic ABS sensor and it does not diagnose every ABS warning.

Before you buy: confirm the rear-wheel position, motorcycle model, variant/year, VIN or EPC requirement, and the complete part number printed on the old part or genuine package.

Part Identification

Key Features

• Genuine Royal Enfield OEM replacement part.
• Exact part number RAB00013/B for accurate catalogue matching.
• Rear-wheel ABS toner ring / tone ring / reluctor ring.
• Toothed reference ring read by the rear ABS wheel-speed sensor.
• Suitable for the catalogue-supported Royal Enfield 650 applications listed below.
• Sold as one ring; quantity purchased equals the number of rings supplied.
• Designed for the rear wheel only, not the front wheel.
• No universal fitment claim; exact model and part-number verification is required.

What This Product Is

• A genuine Royal Enfield ABS TONER RING, REAR WHEEL.
• The toothed mechanical reference component that rotates with the rear wheel.
• A replacement for a bent, damaged, missing or distorted rear ABS ring where RAB00013/B is the specified part.
• Also searched as a rear ABS tone ring, ABS sensor ring, wheel-speed ring or reluctor ring.

What This Product Is Not

• Not the rear brake disc / rotor.
• Not the ABS wheel-speed sensor.
• Not the ABS sensor wire, harness or connector.
• Not the ABS modulator or ECU.
• Not the wheel hub, bearing, spacer or complete rear wheel.
• Not a front-wheel ABS ring.
• Not a universal ring for every Royal Enfield motorcycle.

Compatibility

The exact part number is the primary fitment check. The following applications are catalogue-supported for RAB00013/B, but model-year, market and VIN verification should still be completed before ordering.

Fitment Not Confirmed / Check Before Ordering

Do Not Order For Without Exact EPC Confirmation

• Classic 350 / Classic 350 Reborn (J-Series)
• Bullet 350 J-Series
• Meteor 350
• Hunter 350
• Himalayan 411 / Scram 411
• Himalayan 450 / Guerrilla 450
• Any motorcycle whose rear-wheel catalogue does not specify RAB00013/B

Variants

No variants. This listing is for one rear-wheel ABS toner ring, part number RAB00013/B. The only selectable quantity is the number of rings required.

Part Number / Supersession Notes

• Exact SKU: RAB00013/B.
• Base catalogue number: RAB00013.
• Some international listings omit the slash or display only the base number. Always match the complete suffix printed on the genuine packaging or confirmed EPC.
• No authoritative supersession or replacement chain is claimed in this listing.

Related Parts

How the ABS Toner Ring Works

The toothed ring rotates with the rear wheel. The nearby ABS wheel-speed sensor reads the changing tooth pattern and sends wheel-speed information to the ABS system. The ABS system uses wheel-speed data to help manage braking pressure and reduce the chance of wheel lock-up. The ring contains no wiring, sensor electronics or control module.

When Should This Be Replaced?

• The ring is bent, warped or distorted.
• Teeth are broken, damaged or visibly inconsistent.
• The ring is missing after wheel or brake work.
• The ring has been damaged during tyre replacement, wheel removal or accident repair.
• Diagnosis identifies an incorrect rear-wheel speed signal and physical inspection confirms ring damage.

An ABS warning light does not automatically mean the toner ring is faulty. The sensor, sensor gap, wiring/connectors, wheel bearings, wheel alignment and ABS system should also be inspected.

What's in the Box

1 × Genuine Royal Enfield Rear Wheel ABS Toner Ring — RAB00013/B

The brake disc, ABS sensor, wiring, mounting hardware, hub, bearings, spacers and complete wheel are not included unless separately stated on the actual package.

Installation Notes

ABS and brake-related wheel work is safety-critical. Professional installation is recommended.

1. Confirm that the motorcycle's rear-wheel EPC specifies RAB00013/B.
2. Support the motorcycle securely and remove the rear wheel according to the workshop procedure.
3. Inspect the old ring, ABS sensor and sensor mounting area before fitting the replacement.
4. Install the ring in the correct factory orientation and position.
5. Use the specified fasteners and workshop-manual torque values.
6. Confirm the ring runs true and has the correct clearance from the ABS sensor.
7. Recheck wheel alignment, axle hardware and rear-brake operation.
8. Confirm that the ABS warning lamp behaves normally after the motorcycle begins moving.

Before You Buy / Return-Prevention Note

• Match the complete part number: RAB00013/B.
• Confirm rear wheel, not front wheel.
• Confirm motorcycle model, variant, model year and market specification.
• Use the VIN/EPC or a clear photo of the existing ring when there is any doubt.
• Do not order only because the ring looks similar or the motorcycle has a 650 engine.
• Confirm whether the actual fault is the ring or the sensor, wiring, sensor gap, wheel bearing or ABS system.

Please order only after fitment is confirmed. Orders are non-cancellable once placed. Correctly supplied spare parts are not eligible for return, exchange or refund due to wrong selection, wrong diagnosis, fitment mismatch, mechanic recommendation or change of mind. Wrong-item, damaged-item or missing-item claims require a complete unboxing video within 24 hours of delivery. Do not install, test or mark the part before fitment is confirmed.

FAQs

What is Royal Enfield RAB00013/B?

RAB00013/B is the genuine Royal Enfield ABS TONER RING, REAR WHEEL, also called a rear ABS tone ring, reluctor ring or wheel-speed ring.

Which Royal Enfield motorcycles use RAB00013/B?

Catalogue-supported applications include the Super Meteor 650, Shotgun 650, Classic 650 / Classic 650 Twin and Bullet 650. Confirm the exact part number against the motorcycle's VIN/EPC before ordering, especially for model-year or market-specific variants.

How can I confirm fitment before ordering?

Match the complete part number, rear-wheel position, motorcycle model, variant/year and market specification. If the old ring is available, compare its part number and tooth/ring layout. For any uncertainty, ask a Royal Enfield technician or Under The Hood to verify using the VIN/EPC or clear photos.

Is RAB00013/B the same as RAB00013?

RAB00013 is the base number commonly shown in search results, while this listing uses the complete SKU RAB00013/B. No separate supersession chain is claimed. Match the suffix on the genuine package or confirmed catalogue before dispatch.

Does this include the rear brake disc or ABS sensor?

No. This is one rear ABS toner ring only. The rear brake disc, ABS wheel-speed sensor, wiring, hub and other wheel components are separate unless specifically included in the package.

Can a damaged toner ring cause an ABS warning light?

Yes, a bent, damaged or missing ring can affect the wheel-speed signal. However, an ABS warning can also be caused by the sensor, sensor gap, wiring, wheel bearings, wheel alignment or another ABS-system fault. Diagnose the complete system before replacing the ring.

How should it be installed?

It should be fitted in the correct rear-wheel position and orientation using the workshop-manual procedure, correct fasteners and torque values. Professional installation is recommended because incorrect wheel or ABS work can affect braking safety.

How many rings are supplied?

One genuine rear-wheel ABS toner ring is supplied for each quantity purchased.

Royal Enfield Rear ABS Search Terms

RAB00013/B, RAB00013B, RAB00013, RAB 00013 B, RAB00013-B, ABS toner ring rear wheel, ABS tone ring, rear ABS ring, rear wheel ABS ring, ABS reluctor ring, rear wheel speed ring, ABS sensor ring, toothed ABS ring, Super Meteor 650 ABS ring, Shotgun 650 ABS ring, Classic 650 ABS ring, Bullet 650 ABS ring.

Important Order Policy

Verify the exact part number and fitment before ordering. Electrical/electronic items are additionally non-returnable once opened, installed, plugged in, tested or used. This toner ring is a mechanical ABS component, but it is still safety-critical and must be checked before installation. Wrong, damaged or missing item claims require a complete unboxing video within 24 hours.