• RAB00097/A front brake caliper wear pad shim – Royal Enfield 350 J-Series
1 2

UNDER THE HOOD

Royal Enfield RAB00097/A – OEM Front Brake Caliper Wear Pad (Shim) for Classic 350 Reborn, Meteor 350 & New Bullet 350 (J-Series)

Royal Enfield RAB00097/A – OEM Front Brake Caliper Wear Pad (Shim) for Classic 350 Reborn, Meteor 350 & New Bullet 350 (J-Series)

Rs. 50.00
Rs. 51.00 Rs. 50.00
Sale Sold out
Shipping calculated at checkout.
Important Order Policy
Please order only after confirming the part number, model, variant, year, side, connector type and compatibility. All orders are non-cancellable once placed. Correctly shipped spare parts are not eligible for return, exchange or refund due to wrong selection, wrong diagnosis, fitment mismatch, mechanic recommendation or change of mind. Electrical/electronic items are additionally non-returnable once opened, installed, plugged in, tested or used. Wrong item, damaged item or missing item claims require a complete unboxing video within 24 hours. Read full Return & Warranty Policy

Keep your J-Series Royal Enfield’s front braking quiet, precise, and safe with the genuine RAB00097/A Front Brake Caliper Wear Pad (Shim). This OEM wear pad sits between the brake pad backing plate and the caliper body/retainer, damping vibration, preventing metal-to-metal contact, and helping pads retract evenly after you release the lever. The result is reduced brake squeal, more consistent bite, and longer pad and disc life.

Designed for the front caliper on Classic 350 Reborn (BS6), Meteor 350, and New Bullet 350, RAB00097/A matches factory thickness, profile, and spring pressure zones so the pad stack height and alignment remain to spec. If your front brakes rattle, squeal, or show uneven pad wear, replacing a bent, corroded, or missing wear pad restores OEM performance.

⚠️ Fitment check: this is a small, model-specific part. Match the printed part number (RAB00097/A) and compare the shim’s outline to your original before ordering.

Key Features:

  • Genuine Royal Enfield RAB00097/A OEM wear pad (shim)

  • Front caliper–specific for J-Series 350 models

  • Reduces noise & vibration; improves pad retraction and feel

  • Protects caliper and pad backing from direct contact/wear

  • Correct OEM thickness/profile for proper pad stack height

  • Direct replacement—no modifications required

Compatibility Table:

Model Engine BS Stage Caliper Position
Classic 350 Reborn (J-Series) 349 cc BS6 Front
Meteor 350 349 cc BS6 Front
New Bullet 350 349 cc BS6 Front

Variants:

  • Part No.: RAB00097/A

  • Type: Wear Pad / Anti-squeal Shim

  • Position: Front Caliper

  • Supply: Single piece (order per caliper as needed)

FAQs:

  1. What does a front caliper wear pad/shim do?
    It sits behind the pad to dampen vibration, reduce squeal, and keep the pad face aligned, protecting parts from wear.

  2. Do I need one or two?
    Single-disc front setups use one shim per pad. 

  3. Will this fit the rear brake?
    No. RAB00097/A is for the front caliper only; rear uses a different part number.

  4. Signs my shim needs replacement?
    Persistent squeal/rattle, uneven pad wear, or a missing/bent/corroded shim during pad changes.

  5. Can I use it with aftermarket pads?
    Yes—if the pad backing plate matches OEM shape and your caliper accepts the shim profile/thickness.

Verify Fitment on Official Brand Portals

For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.

Royal Enfield Official Spares Portal

Hero MotoCorp Official eCatalogue

View full details