Please order only after confirming the part number, model, variant, year, side, connector type and compatibility. All orders are non-cancellable once placed. Correctly shipped spare parts are not eligible for return, exchange or refund due to wrong selection, wrong diagnosis, fitment mismatch, mechanic recommendation or change of mind. Electrical/electronic items are additionally non-returnable once opened, installed, plugged in, tested or used. Wrong item, damaged item or missing item claims require a complete unboxing video within 24 hours. Read full Return & Warranty Policy
Royal Enfield Front Fork Cap RAH00684/K | Super Meteor 650, Shotgun 650 & Bear 650
Genuine Royal Enfield front fork cap reference RAH00684/K, factory description FORK CAP. This listing identifies the individual cap used in the front-fork or front-suspension assembly shown in the applicable Royal Enfield partsbooks. Buyer search terms may include front fork cap, fork top cap, fork upper cap or front suspension cap, but the factory identity remains FORK CAP.
Exact part number: RAH00684/K. Some model partsbooks display the base reference RAH00684 without the slash suffix. Keep the complete /K suffix on the order, invoice, package check and fitment comparison. A base-number match or similar-looking cap is not, by itself, an interchange guarantee.
Important quantity note: the checked Super Meteor 650, Shotgun 650 and Bear 650 front-fork fiches each show normal quantity 2 for the base RAH00684 reference. The intended store selling unit is one individual fork cap unless the sealed package and invoice expressly state a pair or another quantity. Confirm the exact EPC before selecting quantity.
Part Identification
| Field | Verified listing detail |
|---|---|
| Brand | Royal Enfield |
| Exact customer-facing reference | RAH00684/K |
| Base reference seen in model fiches | RAH00684; suffix display can vary by catalogue |
| Factory description | FORK CAP |
| Assembly area | Front fork / front suspension |
| Part category | Fork cap component |
| Expected selling unit | 1 individual fork cap; checked model fiches show normal quantity 2 |
| Condition | New genuine/OEM replacement part, subject to package and invoice verification |
| Dimensions | Not stated in the verified sources; do not order by guessed measurements |
| Material and finish | Not stated in the verified sources; no material or coating claim is made |
| Suffix requirement | Preserve /K; do not silently replace it with a different suffix |
What This Product Is
- A genuine Royal Enfield part identified by the exact reference RAH00684/K.
- A fork component catalogued with the factory description FORK CAP.
- An individual front-fork cap for the confirmed applications listed below, subject to the exact market, model year and EPC.
- A replacement component that must be matched with the correct fork tube, O-ring, spring, internal parts and service procedure.
- A part whose model fiche quantity is two in each of the three checked applications, while the shop selling unit remains one unless the package says otherwise.
What This Product Is Not
- Not the separate RAH00683/K FORK CAP ASSY.
- Not the separate RAH00685/K FORK CAP O-RING.
- Not a fork leg, fork outer tube, slide pipe, spring, stopper, bush, dust seal, oil seal or complete front-fork assembly.
- Not a headstock cover, steering-head bearing, stem nut, yoke, steering stem or headstock repair kit.
- Not a universal Royal Enfield cap that can be selected by engine capacity, photograph or visual similarity.
- Not confirmed for Classic 650, Interceptor 650, Continental GT 650, Guerrilla 450, Himalayan 450, Himalayan 411, Scram 411, Scram 440, Bullet 650, Classic 350, Bullet 350, Hunter 350, Meteor 350 or other models listed as unconfirmed.
Key Features and Buyer Benefits
- Exact OEM identity: Royal Enfield RAH00684/K, with the complete suffix preserved.
- Factory wording retained: FORK CAP.
- Buyer-language clarity: front fork cap and front suspension cap terms help relevant searches without changing the catalogue identity.
- Fitment boundaries: Super Meteor 650, Shotgun 650 and Bear 650 are separated from models that still require confirmation.
- Quantity transparency: normal quantity 2 is recorded for all three checked model fiches, while the store unit is one individual cap.
- Assembly distinction: the individual cap is separated from the complete cap assembly and O-ring.
- No invented specifications: dimensions, material, coating, torque and universal-fit claims are not guessed.
- Return-prevention wording: the page tells buyers to verify the exact model, suffix, assembly and quantity before ordering.
Buyer Search Names
RAH00684/K, RAH00684K, RAH00684, Royal Enfield RAH00684/K, Royal Enfield RAH00684, genuine Royal Enfield fork cap, Royal Enfield front fork cap, Royal Enfield front suspension cap, Royal Enfield fork top cap, motorcycle fork cap, OEM motorcycle fork cap, front fork upper cap, Super Meteor 650 fork cap, Super Meteor 650 front fork cap, Super Meteor 650 front suspension cap, Shotgun 650 fork cap, Shotgun 650 front fork cap, Shotgun 650 front suspension cap, Bear 650 fork cap, Bear 650 front fork cap, Bear 650 front suspension cap, genuine Royal Enfield 650 fork cap, RAH00684 fork cap, RAH00684/K OEM fork cap, Royal Enfield fork cap replacement.
Confirmed Compatibility
The following applications are supported by the exact model-specific front-fork partsbook pages used for this listing. Those pages commonly display the base number RAH00684 without the slash suffix; the exact customer-facing reference is RAH00684/K. Confirm your current VIN/EPC, market and package before ordering.
| Royal Enfield application | Catalogue status | Normal quantity in checked fiche | Ordering guidance |
|---|---|---|---|
| Super Meteor 650 | Confirmed in 2023-on front-fork partsbook | 2 | The checked 650 Super Meteor page lists RAH00684 as FORK CAP with normal quantity 2. Confirm the exact market, model year and /K package reference. |
| Shotgun 650 | Confirmed in 2024-on front-fork partsbook | 2 | The checked 650 Shotgun page lists RAH00684 as FORK CAP with normal quantity 2. Verify the current EPC before selecting one or two units. |
| Bear 650 | Confirmed in 2024-on front-fork partsbook | 2 | The checked 650 Bear page lists RAH00684 as FORK CAP with normal quantity 2. Confirm the current model fiche and exact suffix. |
Fitment rule: the model name alone is not enough. Match the complete part reference RAH00684/K, the current model-specific EPC, the front-fork diagram and the required quantity. If the fiche shows only RAH00684, confirm with Royal Enfield or a qualified parts specialist that the current /K reference is the approved replacement for your motorcycle.
Fitment Not Confirmed — Check Before Ordering
| Model or scenario | Why confirmation is required |
|---|---|
| Classic 650 | The checked Classic 650 front-fork page did not list RAH00684. Do not infer fitment from the shared 650 engine; verify the current Classic 650 EPC. |
| Interceptor 650 | Not confirmed in the references used here. The fork-cap assembly may use a different part reference or suffix. |
| Continental GT 650 | Not confirmed in the references used here. Match the exact front-fork fiche rather than assuming shared 650 parts. |
| Guerrilla 450 | Not confirmed for RAH00684/K. Similar capacity or fork terminology does not prove the same cap. |
| Himalayan 450 | Not confirmed. Verify the current Himalayan 450 front-fork assembly and suffix-specific part number. |
| Himalayan 411, Scram 411 or Scram 440 | Not confirmed. These families can use different fork-cap and internal-fork references. |
| Bullet 650 | Not confirmed. Verify the current Bullet 650 catalogue before purchase. |
| Classic 350, Bullet 350, Hunter 350 or Meteor 350 | Not confirmed. Do not use brand, engine family or visual similarity to infer fitment. |
| Aftermarket or modified forks | Custom fork tubes, yokes, stems, caps, spacers and internal parts can change the correct component and quantity. |
| Part selected from a photograph | Photos cannot confirm thread, sealing interface, dimensions, suffix or assembly position. Use the EPC and complete part number. |
Quantity and Selling Unit
| Question | Answer |
|---|---|
| What is supplied? | 1 individual RAH00684/K fork cap, unless the physical sealed package and invoice expressly state another quantity. |
| What quantity is shown for Super Meteor 650? | The checked 2023-on Super Meteor 650 partsbook shows normal quantity 2. |
| What quantity is shown for Shotgun 650? | The checked 2024-on Shotgun 650 partsbook shows normal quantity 2. |
| What quantity is shown for Bear 650? | The checked 2024-on Bear 650 partsbook shows normal quantity 2. |
| Is this listing automatically a pair? | No. The checked motorcycle quantity is 2, but the store selling unit is one individual cap unless the package says pair. |
| How do I order a complete front-fork pair? | Confirm that your exact EPC requires two and select quantity 2. Do not rely only on the general model name or a previous repair. |
| Could a replacement package contain more than one? | Package quantity controls the final physical contents. Check the sealed label and invoice before opening or installing. |
Related Fork References — Keep Them Separate
| Reference | Catalogue description | Difference from RAH00684/K |
|---|---|---|
| RAH00684/K | FORK CAP | This listing. Individual fork-cap component. |
| RAH00683/K | FORK CAP ASSY | Complete fork-cap assembly reference; not automatically included. |
| RAH00685/K | FORK CAP O-RING | Separate O-ring; not automatically included. |
| RAH00687/K | FORK RH SLIDE PIPE ASSY | Right-hand slide-pipe assembly; not a cap. |
| RAH00688/K | FORK LH SLIDE PIPE ASSY | Left-hand slide-pipe assembly; not a cap. |
| RAH00690/K | FORK ROD GUIDE CASE ASSY | Internal fork guide-case assembly; not included. |
| RAH00693/K | FORK OUTER TUBE | Fork outer tube; not included. |
| RAH00694/K | FORK INTERNAL CIRCLIP | Separate internal retaining ring; not included. |
| RAH00696/K | FORK SEAL SPACER | Separate fork seal spacer; not included. |
| RAH00697/K | FORK STOPPER | Separate stopper component; not included. |
| RAH00698/K | FORK HEX NUT | Separate fork hex nut; not included. |
| RAH00699/K and RAH00700/K | Fork springs | Separate spring references; not included. |
| RAH00701/K | FORK DUST SEAL | Separate dust seal; not included. |
| RAH00702/K | FORK OIL SEAL | Separate oil seal; not included. |
| RAH00703/K and RAH00704/K | Fork slide bush / guide bush | Separate bushes; not included. |
| RAH00705/K | FORK STOPPER RING B | Separate stopper ring; not included. |
| RAH00708/K and RAH00709/K | Rebound springs | Separate internal spring references; not included. |
| RAH00218 | HEADSTOCK COVER | Separate headstock cover; not a fork cap. |
| RAH00058/C | BEARING 30 55 17 | Separate headstock/front-suspension bearing reference; not included. |
| RAH00051/B | SEAL HEADSTOCK BEARING | Separate headstock bearing seal; not included. |
How This Part Fits Into the Fork Assembly
In the checked model fiches, RAH00684 is positioned in the front-fork assembly beside the fork-cap assembly, O-ring, slide-pipe, outer-tube and internal-fork references. This listing keeps the identity narrow: it is the FORK CAP component, not every part shown near it in the diagram.
The cap must match the correct fork tube, thread, sealing interface, spring and internal stack-up for the motorcycle. A cap that resembles this part, has a similar thread or is described by a seller as a generic top cap may still be wrong. Use the complete Royal Enfield reference and current EPC.
Installation and Safety Notes
Professional installation is strongly recommended. Fork-cap work can involve spring preload, stored mechanical energy, fork oil, sealing surfaces and suspension components that affect braking and steering stability. Use the current Royal Enfield workshop manual for the exact motorcycle.
- Confirm the complete reference RAH00684/K, model, market, VIN/EPC, fork position and required quantity before dismantling.
- Support the motorcycle securely using the approved workshop method before loosening fork caps, yokes or front-end components.
- Read the service procedure before attempting removal. Do not loosen a cap against unknown spring load or without the correct tools.
- Inspect the cap, threads, fork tube, O-ring, seating surface, spring, spacer, stopper, internal circlip and adjacent components for wear, damage, corrosion or contamination.
- Do not force, cross-thread, strike, drill, grind or modify the cap. Stop if the part does not start and seat correctly by the prescribed method.
- Replace the separate O-ring or other seals when the workshop procedure and physical inspection require it. RAH00685/K is not assumed to be included.
- Use only the exact model-specific torque and adjustment values from the current Royal Enfield workshop manual. No torque value is invented here.
- Check that the fork cap is fully seated, the sealing interface is correct and the fork assembly is restored exactly as specified.
- After assembly, check fork movement, steering movement, brake operation, fastener security, cable/hose routing and signs of fork-oil leakage before riding.
- Stop riding and have the motorcycle inspected if there is leakage, binding, unusual noise, loose steering, poor suspension response or any doubt about the repair.
Inspection and Diagnosis Guide
| Observation | Possible causes | Ordering warning |
|---|---|---|
| Cap is damaged or visibly cracked | Impact, over-tightening, incorrect tool, corrosion or previous service damage | Confirm the cap reference and inspect the fork tube and threads before ordering only the cap. |
| Cap threads do not start smoothly | Wrong suffix, cross-threaded tube, damaged threads, debris or misalignment | Stop; never force a cap into a mismatched fork. |
| Fork oil leaks around the cap | Damaged O-ring, incorrect sealing surface, loose/damaged cap, tube damage or other fork leak | Check RAH00685/K and the complete fork assembly separately. |
| Fork cap cannot be removed | Spring preload, seized threads, corrosion, previous over-tightening or wrong tool | Follow the exact service procedure; professional support is recommended. |
| Front suspension feels wrong after replacement | Incorrect cap, spring/spacer issue, oil level, internal-fork error, alignment or unrelated suspension fault | Do not assume the cap alone caused the symptom. |
| Old cap looks similar to RAH00683/K | Individual cap and complete cap assembly may appear similar in a photo | Match the exact factory description and component level. |
| Model uses a different suffix | Market, model-year change or supersession | Do not silently substitute /K; verify the approved replacement with the EPC. |
| One cap is being replaced on a two-cap front end | Normal quantity 2 in the checked model fiches | Inspect both sides and select quantity from the exact fiche. |
Package Contents
Expected primary item: 1 × genuine Royal Enfield RAH00684/K FORK CAP.
Not assumed to be included: second fork cap, RAH00683/K cap assembly, RAH00685/K O-ring, fork tubes, slide pipes, springs, stoppers, bushes, dust seal, oil seal, circlips, fork oil, tools, motorcycle or complete front-fork repair kit. The physical sealed package and invoice control the final contents.
Before You Buy — Return-Prevention Checklist
- Confirm your exact Royal Enfield EPC calls for RAH00684/K, or confirms that /K is the current approved replacement for base reference RAH00684.
- Confirm the model is Super Meteor 650, Shotgun 650 or Bear 650 and that the model year and market match the checked fiche.
- Confirm the motorcycle’s front-fork diagram and normal quantity; the checked applications show quantity 2.
- Confirm that you need the individual FORK CAP, not RAH00683/K FORK CAP ASSY.
- Confirm whether RAH00685/K O-ring, fork seals, bushes, spring or other service parts are needed separately.
- Do not rely on a photograph, generic “650 fork cap” wording, engine capacity or a measurement without the exact reference.
- Check the suffix and quantity on the package before opening or installing the part.
Orders cannot be cancelled once placed. Correctly supplied spare parts are non-returnable and non-refundable for wrong selection, wrong diagnosis, mechanic recommendation, fitment mismatch or change of mind. Any wrong-item, damaged-item or missing-item claim must include the order ID, a complete continuous unboxing video recorded from the sealed package before opening, product/label/package photographs and other relevant evidence, with notification within 24 hours of delivery.
FAQs
What is Royal Enfield RAH00684/K?
RAH00684/K is the genuine Royal Enfield FORK CAP reference used in the front-fork or front-suspension assembly. It is commonly searched as a Royal Enfield front fork cap, fork top cap or front suspension fork cap. Match the complete suffix-specific part number before ordering.
What is the factory description for RAH00684/K?
The verified genuine-parts catalogue description is FORK CAP. Some model partsbooks show the base reference RAH00684 without the slash suffix, while the exact public genuine reference used for this listing is RAH00684/K.
Is RAH00684/K a genuine Royal Enfield part?
The suffix-specific public Royal Enfield genuine-parts reference identifies RAH00684/K as a genuine Royal Enfield FORK CAP. Check the physical package, label, invoice and part number when the item arrives.
Which Royal Enfield motorcycles are confirmed for RAH00684/K?
The checked model-specific partsbooks list the base reference RAH00684 as FORK CAP for the 2023-on Super Meteor 650, 2024-on Shotgun 650 and 2024-on Bear 650. Confirm the exact model year, market, VIN/EPC and suffix before purchase.
Does RAH00684/K fit the Super Meteor 650?
Yes, the checked 650 Super Meteor partsbook for the 2023-on model lists RAH00684 as FORK CAP with normal quantity 2. Verify the current model-specific EPC and package suffix because catalogue displays may omit /K.
Does RAH00684/K fit the Shotgun 650?
Yes, the checked 650 Shotgun partsbook for the 2024-on model lists RAH00684 as FORK CAP with normal quantity 2. Confirm the exact market, model year and current EPC before ordering.
Does RAH00684/K fit the Bear 650?
Yes, the checked 650 Bear partsbook for the 2024-on model lists RAH00684 as FORK CAP with normal quantity 2. Confirm the current fiche and exact suffix before ordering.
Does RAH00684/K fit the Classic 650?
Fitment is not confirmed for the Classic 650 in the references used for this listing. The checked Classic 650 front-suspension page did not list RAH00684, so verify the current Classic 650 EPC rather than inferring fitment from the shared 650 engine.
Does RAH00684/K fit the Interceptor 650 or Continental GT 650?
Fitment for Interceptor 650 and Continental GT 650 is not confirmed here. Their fork-cap and front-suspension assemblies may use different references. Check the exact parts fiche or VIN-based EPC before purchase.
Does RAH00684/K fit the Guerrilla 450?
Fitment for Guerrilla 450 is not confirmed for this exact listing. Do not infer interchange from similar fork parts or the Royal Enfield brand; verify the Guerrilla 450 EPC.
Does RAH00684/K fit Himalayan 450, Himalayan 411 or Scram models?
Fitment for Himalayan 450, Himalayan 411, Scram 411 and Scram 440 is not confirmed. These motorcycles can use different fork assemblies and caps. Match the exact model fiche before ordering.
How many RAH00684/K fork caps are required?
The checked Super Meteor 650, Shotgun 650 and Bear 650 partsbooks each show normal quantity 2 for the RAH00684 base reference. This listing is for one individual cap unless the package and invoice expressly state a pair.
Is RAH00684/K sold as one cap or a pair?
The intended selling unit is one individual fork cap. The checked motorcycle fiches show normal quantity 2 because two caps are used in the referenced front-fork assembly. Order two only when your exact EPC confirms that quantity or when the product package explicitly says pair.
Is RAH00684/K the complete fork cap assembly?
No. RAH00684/K is catalogued as FORK CAP. RAH00683/K is a separate FORK CAP ASSY reference. Do not substitute the assembly for the individual cap or assume that the assembly, O-ring or internal parts are included.
Does RAH00684/K include the fork-cap O-ring?
No inclusion is assumed. RAH00685/K is separately listed as FORK CAP O-RING in the related fork assembly references. Order the O-ring separately if the service procedure or your EPC requires it.
Does RAH00684/K include the forks or fork internals?
No. This listing is for the individual FORK CAP only. It does not include fork legs, slide pipes, outer tubes, springs, stopper, bushes, seals, fork rod guide case or a complete fork assembly.
What are the dimensions, material or finish of RAH00684/K?
The verified sources identify the item by part number and factory description FORK CAP but do not provide confirmed dimensions, material, coating or finish. Those details are intentionally not guessed. Use the exact part number and physical package for identification.
What is the difference between RAH00684/K and RAH00685/K?
RAH00684/K is the FORK CAP. RAH00685/K is the separate FORK CAP O-RING. One does not replace the other, and an O-ring is not assumed to be included with the fork cap.
What is the difference between RAH00684/K and RAH00683/K?
RAH00684/K is the individual FORK CAP. RAH00683/K is the separate FORK CAP ASSY. Check whether your repair requires a component or the complete assembly before ordering.
What is the difference between a fork cap and a headstock cover?
RAH00684/K is a FORK CAP in the front-fork assembly. RAH00218 is a separate HEADSTOCK COVER reference. The two parts are in different positions and are not interchangeable.
What symptoms may indicate a damaged fork cap?
Possible signs can include visible damage, damaged threads, leakage around the cap or O-ring, difficulty removing or installing the cap, or a fork assembly that cannot be secured correctly. These symptoms can also come from the O-ring, fork tube, threads, spring, internal parts or incorrect assembly, so inspect the complete fork.
Can I choose RAH00684/K by comparing a photograph?
No. A photograph or visual similarity is not enough to establish fitment. Compare the complete suffix-specific reference, the exact Royal Enfield EPC, the model year and the fork assembly position before ordering.
What torque should be used for RAH00684/K?
No torque value is provided in this listing. Use the current Royal Enfield workshop manual for the exact motorcycle, correct tools and the complete fork-cap installation procedure. Do not copy a torque value from another model.
Should RAH00684/K be installed by a technician?
Professional installation is strongly recommended. Fork-cap removal and installation can involve spring load, fork oil, sealing surfaces and suspension safety. Follow the exact service procedure and support the motorcycle securely.
What is included with RAH00684/K?
Expected contents are one individual genuine Royal Enfield RAH00684/K FORK CAP. No pair, O-ring, cap assembly, fork tube, spring, seal, tool or complete fork is assumed unless explicitly stated on the physical package and invoice.
Can I cancel or return RAH00684/K after ordering?
Orders cannot be cancelled once placed. Correctly supplied spare parts are non-returnable for wrong selection, wrong diagnosis, mechanic recommendation, fitment mismatch or change of mind. Wrong, damaged or missing-item claims require the order ID, a complete continuous unboxing video from the sealed package before opening, photos or other evidence, and notification within 24 hours of delivery.
SEO Tags
Royal Enfield, Genuine Royal Enfield Parts, Royal Enfield OEM, RAH00684/K, RAH00684K, RAH00684, FORK CAP, Royal Enfield Fork Cap, Front Fork Cap, Front Suspension Cap, Fork Top Cap, Motorcycle Fork Cap, OEM Motorcycle Fork Cap, Super Meteor 650 Fork Cap, Super Meteor 650 Front Fork Cap, Super Meteor 650 Front Suspension, Shotgun 650 Fork Cap, Shotgun 650 Front Fork Cap, Shotgun 650 Front Suspension, Bear 650 Fork Cap, Bear 650 Front Fork Cap, Bear 650 Front Suspension, Genuine Royal Enfield 650 Fork Cap, RAH00684 Fork Cap, Royal Enfield Fork Cap Replacement, Royal Enfield Suspension Parts, Royal Enfield Front Fork Parts.
Image Filename Suggestions
- royal-enfield-rah00684-k-front-fork-cap-genuine-oem.jpg
- rah00684-k-fork-cap-super-meteor-650.jpg
- rah00684-k-fork-cap-shotgun-650.jpg
- rah00684-k-fork-cap-bear-650.jpg
- royal-enfield-rah00684-k-fork-cap-package-label.jpg
- rah00684-k-fork-cap-single-unit-detail.jpg
Image Alt Text Suggestions
- Genuine Royal Enfield RAH00684/K front fork cap
- Royal Enfield Super Meteor 650 RAH00684/K fork cap
- Royal Enfield Shotgun 650 RAH00684/K front fork cap
- Royal Enfield Bear 650 RAH00684/K front suspension fork cap
- RAH00684/K FORK CAP genuine Royal Enfield OEM part
- Single Royal Enfield RAH00684/K fork cap package label
Google Shopping Notes
Recommended identity: brand Royal Enfield; MPN RAH00684/K; base alias RAH00684; product type front fork cap / front suspension cap; factory description FORK CAP; condition new; compatible applications Super Meteor 650, Shotgun 650 and Bear 650 subject to exact EPC verification. Keep the slash suffix consistent across title, body, SKU, MPN, invoice, package label, image filenames and product feed. Add direct genuine product images before publishing; this import intentionally leaves image fields blank.
Shopify Discoverability Pack
SEO title: RAH00684/K Fork Cap | Royal Enfield 650
Meta description: Genuine Royal Enfield RAH00684/K fork cap for Super Meteor 650, Shotgun 650 and Bear 650. Verify the exact model, suffix and quantity before ordering.
Suggested URL handle: royal-enfield-rah00684-k-front-fork-cap
Search intent covered: exact RAH00684/K and RAH00684 searches, genuine Royal Enfield fork-cap searches, front fork cap and front suspension cap searches, Super Meteor 650/Shotgun 650/Bear 650 fitment searches, individual-versus-pair quantity searches, fork-cap assembly and O-ring comparison searches, and buyer questions about fitment, installation and returns.
Suggested internal search targets: RAH00684/K, RAH00684, FORK CAP, Front Fork Cap, Front Suspension Cap, Super Meteor 650 Fork Cap, Shotgun 650 Fork Cap, Bear 650 Fork Cap, RAH00683/K, RAH00685/K.
Competitor-Gap Fix
This listing preserves the exact RAH00684/K suffix and the base-number alias RAH00684, keeps the factory description FORK CAP, uses buyer-language fork-cap terms, records the three checked model applications, states normal quantity 2, separates the individual cap from the cap assembly and O-ring, identifies nearby fork parts that are not included, avoids unsupported dimensions/material/finish/torque claims, gives installation and safety guidance, provides FAQ and image SEO copy, and uses strict return-prevention wording. It is optimized for high-intent search clarity and ranking potential; no listing can guarantee Google position 1 because rankings depend on competition, authority, indexing, relevance, page quality and performance.
Verify Fitment on Official Brand Portals
Verify Fitment on Official Brand Portals
For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.
Royal Enfield Official Spares Portal
Hero MotoCorp Official eCatalogue
Become a Dealer Partner
We supply 100% genuine OEM parts to workshops and dealers across India. Our team will reach out within 24 hours.