• Royal Enfield Genuine Speedo Drive Assembly (Front Wheel Speedometer Gearbox) – RAJ00017/A
1 3

Royal Enfield

Royal Enfield Genuine Speedo Drive Assembly (Front Wheel Speedometer Gearbox) – RAJ00017/A

Royal Enfield Genuine Speedo Drive Assembly (Front Wheel Speedometer Gearbox) – RAJ00017/A

Rs. 178.00
Rs. 180.00 Rs. 178.00
Sale Sold out
Shipping calculated at checkout.
Important Order Policy
Please order only after confirming the part number, model, variant, year, side, connector type and compatibility. All orders are non-cancellable once placed. Correctly shipped spare parts are not eligible for return, exchange or refund due to wrong selection, wrong diagnosis, fitment mismatch, mechanic recommendation or change of mind. Electrical/electronic items are additionally non-returnable once opened, installed, plugged in, tested or used. Wrong item, damaged item or missing item claims require a complete unboxing video within 24 hours. Read full Return & Warranty Policy

Product Description

Royal Enfield RAJ00017/A is an OEM speedometer drive assembly used on certain front wheel hub setups where the speed signal is taken mechanically from the wheel. If the drive is worn, you may see jumping/zero speed readings or grinding noise from the hub.

Also searched as: speedo drive, speedometer gearbox, hub speedo drive, front wheel speedo drive, RAJ00017.

Before you buy: Fitment depends on the exact front hub and cable/drive style. Confirm RAJ00017/A in your EPC and match by hub photo + drive interface before ordering.

Key Features 

  • Genuine Royal Enfield speedo drive assembly (RAJ00017/A)
  • Restores accurate speed readings on mechanical wheel-driven speedometers
  • Helps fix jumping/zero speed reading due to worn internal gears
  • OEM interface geometry for correct engagement with hub and speedo cable
  • Ideal replacement after water ingress or gear wear
  • Return-prevention: hub interface verification guidance included

Compatibility Table

Model Platform/Engine BS/Emission Years Status (✅/❓) Notes/Constraints
Bullet 350 ES (BSIV) UCE 350 BS4 — ✅ Two dealer sources map RAJ00017/A to Bullet 350 ES / Bullet 350 context.
Bullet 350 (selected years) UCE 350 BS4/BS6 mix 2017–2025 (seller mapped) ❓ Later bikes may use electronic sensors; confirm mechanical drive hub style.
Classic 350 (selected years) UCE 350 BS3/BS4/BS6 mix 2010–2025 (seller mapped) ❓ Mapping varies; confirm mechanical hub drive vs electronic sensor.
J-Series/650/Himalayan-Scram J / 650 / LS410 BS6 — ❓ Most use electronic sensors; do not order unless EPC shows RAJ00017/A.

Variants

No variants (Default Title).

FAQs

Q1 (Fitment): How do I confirm RAJ00017/A fits?

Confirm your hub uses a mechanical speedo drive, then match RAJ00017/A in EPC and compare hub interface.

Q2 (Fitment): Is this for all Bullet/Classic?

No. Some variants use electronic pickup. Order only if EPC confirms.

Q3: Mechanical vs electronic speed pickup?

Mechanical uses a gearbox drive at the wheel; electronic uses a sensor + tone ring. Parts are not interchangeable.

Q4 (Installation): Any notes?

Lightly grease, seat fully, ensure engagement, and route cable without sharp bends.

Q5 (Symptoms): What indicates a failed speedo drive?

Jumping needle, zero reading, grinding noise from hub, or speedo stops after wheel removal.

Q6 (Returns-prevention): What should I send?

Hub photo + model/year/BS and EPC screenshot (if available).


Verify Fitment on Official Brand Portals

For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.

Royal Enfield Official Spares Portal

Hero MotoCorp Official eCatalogue

View full details