Royal Enfield RAL00279 / RAL00279/C – Genuine Clutch Lever & Holder Assembly LH for Himalayan 411 & Scram 411

The Royal Enfield RAL00279 / RAL00279/C – Lever and Holder Assembly LH is the genuine left-hand clutch lever + perch used on the Royal Enfield Himalayan 411 and Scram 411. This is not a loose aftermarket lever – it is the complete OEM assembly supplied by Royal Enfield, as listed in the official price list under “LEVER AND HOLDER ASSY LH”.

Multiple microfiche-based dealers and international parts sellers confirm RAL00279/C as the stock LH clutch lever assembly for the 411 Himalayan platform, including BS6 models.

If your clutch lever is bent after a fall, has too much play at the pivot, or the perch has cracked around the handlebar clamp, this assembly restores safe, smooth clutch operation. Being OEM, it matches the original geometry for the 411 cc LS engine and factory switchgear, so cable routing, reach and free-play adjustment remain exactly as designed by Royal Enfield.

Ideal for daily riders, tourers and ADV riders who want plug-and-play replacement with no guesswork, this part comes ready to bolt onto the stock handlebar. For best results, inspect your clutch cable and switch kit while replacing the lever, and lubricate the pivot to extend service life.

Key Features 

• Genuine Royal Enfield part – OEM Lever and Holder Assembly LH, part no. RAL00279 / RAL00279/C.

• Designed for 411 platform – Correct fitment for Himalayan 411 and Scram 411 models using the LS410 engine.

• Complete clutch side assembly – Includes the left-hand lever and holder/perch in one unit, as supplied by Royal Enfield.

• OEM ergonomics & feel – Maintains stock lever reach, leverage ratio and free-play characteristics for smooth clutch action.

• Direct bolt-on replacement – Mounts onto the original handlebar and interfaces with the factory clutch cable and switchgear; no modification required.

• Factory finish – Silver LH clutch lever assembly as listed by official and regional Royal Enfield distributors.

• Authentic RE packaging – Supplied in genuine Royal Enfield packing with printed RAL00279/C part label and HSN 87141090.

• Reduces risk of misfit – Using the exact OEM part avoids cable misalignment and premature wear often seen with cheap aftermarket levers.

Compatibility Table 

*Years are based on documented production of the 411 cc Himalayan and launch of the Scram 411; this part number is repeatedly cited by dealers for 2021–2023 BS6 Himalayans and Scram 411.

PLEASE CHECK PART NUMBER BEFORE ORDER 

Explicitly NOT confirmed / not listed for:

• Himalayan 450 (452 cc), Scram 440

• Classic 350 / Bullet 350 / Meteor 350 / Hunter 350

• 650 Twins, J-Series, Guerrilla 450

If you have these models, do not order this lever without verifying part number against your VIN or old part.

Variants

• Part: Lever and Holder Assembly LH (Clutch side)

• Part numbers covered: RAL00279 (base), RAL00279/C (latest supersession)

• Finish: Silver

• Side: Left-hand (LH) – clutch side

• Quantity required per bike: 1

No colour, LH/RH, or “with/without switch” variants under this part number; front brake lever is a different part.

What’s in the Box

• 1 × Royal Enfield RAL00279/C – Lever and Holder Assembly LH (Clutch side)

• Genuine Royal Enfield packaging with printed part label

(Handlebar, clutch cable, switch module, mirror, and mounting hardware other than what comes pre-assembled on the perch are not included.)

Installation Notes

• Recommended to be installed by a trained mechanic or at least an experienced DIY rider.

• Remove old lever and perch, clean handlebar area, and inspect clutch cable end for wear or fraying.

• Lightly grease the lever pivot and cable barrel before installation.

• Torque clamp bolts evenly to avoid cracking the perch; do not overtighten.

• Re-adjust clutch free-play as per Himalayan/Scram 411 owner’s manual and test in gear with engine running before riding.

FAQs 

1. Is RAL00279/C the original clutch lever assembly for Himalayan 411?
Yes. Hitchcocks’ microfiche-based parts book lists RAL00279 – Lever and Holder Assy LH on the 411 Himalayan handlebar page, and multiple reputable sellers describe RAL00279/C specifically as the clutch lever & holder assembly for Himalayan 411.

2. Does this lever fit Scram 411 as well?
Yes. Several Latin American and European listings show RAL00279/C explicitly for Scram 411 and Himalayan 411, confirming the same clutch lever assembly is shared across the 411 platform.

3. Is this the clutch or front brake lever?
It is the clutch side (left-hand) lever and holder assembly. Front brake levers on Himalayan/Scram 411 use different part numbers and are mounted on the right-hand master cylinder.

4. Will this lever work on the new Himalayan 450 or Scram 440?
No. The new 450/440 platform has different controls, calipers and hardware. Current catalog and dealer data do not cross-reference RAL00279/C to these models, so we treat them as incompatible to avoid returns.

5. Do I need to change my clutch cable when installing this?
Not mandatory, but it’s a good time to inspect the existing cable for fraying or stiffness. If the cable feels heavy or shows broken strands, replace it along with the lever assembly for the best clutch feel and long-term reliability.