Royal Enfield RAN00028 / RAN00028/B – Navigation Display / Tripper Bracket (Bracket-Display Device) for Classic 350 Reborn & New Bullet 350 (J-Series) – Genuine OEM

The Royal Enfield RAN00028 / RAN00028/B – Bracket-Display Device is the genuine navigation / display mount bracket used on the All New Classic 350 Reborn (J-Series) and the new Bullet 350 (J-Series) to hold the factory navigation display / Tripper-style unit securely in front of the rider.

Official-style European parts portals and price lists describe RAN00028/B simply as “BRACKET-DISPLAY DEVICE” for the Classic platform and list it alongside Classic 350 manuals and lighting parts. Multiple dealers and marketplaces label it more clearly as “Navigation Display Bracket fit for New Classic 350 Reborn” with manufacturer part number RAN00028/B, confirming direct fitment for the J-Series Classic 350.

Indian and UK-based spares sellers (Mickey Spares, Rigel/Iron City, etc.) list RAN00028 or RAN00028/B as compatible with “All New Classic 350; Bullet 350”, while community tech discussions note this is the specific bracket required for the Tripper/navigation unit on J-Series Classic and J-Series Bullet.

Made from sturdy metal, this small but critical bracket positions the navigation/display pod at the correct angle above the headlamp / instrument cluster, keeping it solid, rattle-free and easy to read. For riders retrofitting the official navigation display, or replacing a bent or broken mount after a fall, RAN00028/B is the exact OEM bracket you should use—no cutting, drilling or jugaad mounts required on the supported bikes.

🔧 Note: Bracket only – navigation/display unit is NOT included.

Key Features

• Genuine Royal Enfield OEM part – Part No. RAN00028 / RAN00028/B – Bracket-Display Device / Navigation Display Bracket.

• Specifically identified as “Support navigateur Classic” / “Navigation Display Bracket Fit For New Classic 350 Reborn” by official-style EU vendors and eBay sellers.

• Confirmed compatibility with All New Classic 350 Reborn (J-Series) and new Bullet 350 (J-Series) through dealer catalogues and owner forum references.

• Designed to mount the factory navigation display / Tripper-style unit in front of the rider with correct angle and clearance.

• Direct bolt-on fitment on supported J-Series models – uses original mounting points and fasteners; no frame or headlamp modifications needed.

• Robust metal construction engineered to withstand road vibrations, potholes and regular steering movement better than generic fabricated brackets.

• Keeps navigation/display wiring routed as per OEM design, reducing chance of pinched cables or steering lock interference.

• Ideal for retrofit of original navigation unit, replacement after crash damage, or converting from local jugaad mounts back to a clean factory look.

Compatibility Table

CHECK PART NUMBER BEFORE PURCHASE 

Variants

• RAN00028 – Bracket-Display Device

• RAN00028/B – Bracket-Display Device (current superseded revision)

Both refer to the same navigation/display bracket design; /B is the newer suffix seen in recent Royal Enfield price lists and EU fiches.

• Position: Front, near headlamp / instrument cluster

• Contents: Bracket only (no navigation display unit, no wiring, no fasteners unless specified on your invoice)

FAQs

Q1. Does this bracket include the navigation display / Tripper pod?
No. RAN00028 / RAN00028/B is the bracket only. The actual navigation/display unit (often sold with a different part number, e.g. display kit including 1100494/G in some listings) must be purchased separately.

Q2. Will this fit my old UCE Classic 350 or Classic 500?
No confirmed fitment. All reliable references tie RAN00028/B to the J-Series Classic 350 Reborn and J-Series Bullet 350, not the older UCE platform. For UCE models, navigation mounts are different and this bracket may not align with the top yoke or headlamp brackets.

Q3. Can I use this bracket to mount a phone holder or GPS instead of the RE navigation unit?
Yes, many riders use the OEM bracket as a solid base for lightweight phone/GPS mounts, but it is designed primarily for the Royal Enfield navigation/display unit. Avoid overly heavy setups to prevent metal fatigue or vibration issues over time.

Q4. Is any wiring modification required when installing this bracket?
On the supported J-Series Classic 350 and Bullet 350, the bracket uses existing mounting points. When retrofitting the official navigation unit, you only route the factory harness as per RE instructions – no cutting or splicing is needed if you use the OEM kit.

Q5. How can I be sure this is the correct bracket for my bike?
Check your current parts: if your EPC or service centre references RAN00028/B for the navigation/display mount – or your existing bracket has this number on its label – this is the correct replacement. You can also share your VIN + cockpit photo with us for a microfiche-based confirmation before ordering.