Royal Enfield RAW00002 – Side Stand Assembly (Black) for Classic 500 Euro IV Pegasus & Bullet 350 ES Disc BS4 – Genuine OEM

Royal Enfield RAW00002 – Side Stand Assembly is the genuine black side stand (main parking stand on the left) used on selected Classic and Bullet UCE models. Official Royal Enfield microfiche and EU parts portals list RAW00002/A as the OE side stand assembly for Classic 500 Euro IV / Pegasus models, under the “Frame & Parts” and “Centre & Side Stands – Classic 500 Euro IV (C5)” sections.

If your side stand is bent, sagging, or causing the bike to lean excessively, replacing it with this genuine assembly restores the factory lean angle and parking stability. The OEM stand is built from heavy-duty steel with a black finish and is designed to work with the original side stand mounting bracket (e.g., 866255/866107, RAW00036), spring and switch as shown in the Classic 500 Euro IV parts catalogue.

Unlike generic aftermarket stands, RAW00002 is engineered by Royal Enfield for precise bolt alignment and switch operation, ensuring reliable return and proper side stand cut-off (where equipped).

🔎 Note: Many sellers advertise RAW00002 as suitable for Classic 350 UCE as well. However, official microfiche explicitly confirms Classic 500 Euro IV / Pegasus and Bullet 350 ES Disc BS4. For other models, always cross-check with your VIN and parts book before ordering.

Key Features 

• Genuine OEM side stand – Royal Enfield part number RAW00002 (also supplied as RAW00002/A or RAW00002/C in newer batches), described as “SIDE STAND ASSY” in official price lists.

• Confirmed fitment for Classic 500 Euro IV / Pegasus via official EU microfiche and European parts portals.

• Confirmed fitment for Bullet 350 ES Disc – BSIV (India) from specialist Indian RE parts dealer listings.

• Heavy-duty steel construction – designed to carry the full weight of the bike safely when parked.

• Durable black finish – matches OEM chassis parts and resists rust and weathering.

• Correct lean angle & geometry – restores stable parking and prevents the bike from leaning too far to the left.

• Works with OE hardware – designed to operate with OEM side stand mounting brackets (e.g., 866255/866107/RAW00036), spring (RAW00029/B / 591992/B) and side-stand switch (586164/A) listed in the same Classic 500 Euro IV stand assembly diagram.

• No modification required on listed models – direct bolt-on using factory mounting points and hardware.

PLEASE CHECK PART NUMBER BEFORE PURCHASE 

Compatibility Table 

❓ Cautious / Commonly Advertised Fitment (Verify Before Purchase)

Explicit Exclusions

• ❌ J-Series models – Classic 350 Reborn, new Bullet 350 J, Hunter 350, Meteor 350, Super Meteor 650, Shotgun 650, Guerrilla 450, Himalayan 450 – all use different frames and stand designs; RAW00002 is not listed for these in any official microfiche.

• ❌ Himalayan 411 / Scram 411, Thunderbird 350/500, 650 Twins, GT 535 – separate side stand assemblies and mounting hardware; do not use RAW00002 unless cross-checked by part number.

Variants

This product is the complete side stand assembly for the specified models:

• RAW00002/A – Side Stand Assy (Black)

• RAW00002/C – Side Stand Assy (Black, later revision)

On your product page you can mention:

• Variant shown: RAW00002/C (current packing)

• Supersession: Functionally replaces RAW00002/A where listed in microfiche for Classic 500 Euro IV Pegasus / C5 models.

FAQs

Q1. What exactly is included in RAW00002 Side Stand Assembly?
RAW00002 refers to the complete side stand leg assembly (the main black stand that flips down to park the bike). Normally it does not include the mounting bracket (e.g., 866255/RAW00036), spring, bolts or switch – those are separate part numbers in the Classic 500 Euro IV stand diagram.

Q2. Will this side stand fit my Classic 350 UCE disc/ABS model?
Many sellers use RAW00002/C as a replacement for Classic 350 UCE as the shape matches the C5 stand. However, official microfiche unambiguously confirms it for Classic 500 Euro IV / Pegasus and Bullet 350 ES Disc BS4 only. We recommend checking your existing stand’s part number or confirming with an RE dealer (via VIN) before ordering for Classic 350.

Q3. How is this better than a local aftermarket side stand?
This is a genuine Royal Enfield stand, built to factory spec. That means: correct length, correct stop angle, reliable weld quality, proper operation with OE springs and side stand switch (where fitted), and predictable lean angle. Cheaper aftermarket stands often change the lean angle, foul on exhausts or don’t work reliably with the cut-off switch.

Q4. My bike leans too much; do I need the stand or the mounting bracket?
If the leg itself is bent or ground down, RAW00002 (side stand assembly) is the correct fix. If the frame-mounted bracket is bent, you also need the appropriate side stand mounting component (e.g., 866255 / 866107 / RAW00036 for many C5 models). Often, a tired bike needs both the stand and bracket replaced together for best results.

Q5. Is RAW00002 suitable for new J-series models like Classic Reborn or Meteor?
No. J-series models have a completely different chassis and side stand design. RAW00002 is not listed for them in any official RE parts catalogue or dealer microfiche. Please order the J-series specific stand.