Royal Enfield RAW00158/A – Side Stand Mounting Complete (Black) | Genuine Bracket Assembly for Bullet 350 UCE

Restore the original lean angle and confidence of your Royal Enfield with the genuine RAW00158/A Side Stand Mounting Complete – Black. This is the OEM side-stand mounting bracket assembly that bolts to the frame and carries the side stand, spring and stopper, not a local welded or fabricated piece.

Over time, the stock bracket often bends, cracks around the weld area or develops excessive play, causing your Bullet to lean too much or stand almost upright – both are risky on Indian roads and uneven parking surfaces. Replacing the worn or bent mount with RAW00158/A brings back factory geometry so the bike rests at the correct angle, the stand flicks up smoothly, and the spring seats properly without fouling the exhaust or footrest.

This part is a direct-fit replacement for Bullet 350 UCE models that use RAW00158/A from the factory. We strongly recommend matching your existing bracket’s part number (stamped/printed) or confirming via the Royal Enfield parts catalog before ordering to avoid returns. Being an OEM bracket, the material thickness, mounting hole spacing and powder-coat finish are all as per Royal Enfield standards for durability and corrosion resistance.

Ideal for bikes that have suffered a fall, frame repair, or years of daily use, this is the cleanest way to fix a wobbly or unsafe side stand on your Bullet 350.

Key Features 

1. Genuine OEM Part: Original Royal Enfield Side Stand Mounting Complete – RAW00158/A, not local fabrication.

2. Correct Lean Angle Restored: Designed to bring your Bullet 350 back to the factory-specified side-stand angle for safer parking.

3. Direct Bolt-On Fitment: Mounts to the existing frame points on compatible Bullet 350 UCE models with no cutting or welding.

4. Heavy-Duty Steel Construction: OEM-grade metal thickness and gusseting for strength under full bike weight.

5. Durable Black Finish: Factory-style black coating to resist rust and blend with the chassis.

6. Supports Stand, Spring & Stopper: Provides accurate locations for side stand pivot, return spring and rubber stop.

7. Best Fix for Bent/Worn Mounts: Eliminates side-stand wobble and over-lean caused by damaged brackets.

8. Reduced Trial-and-Error: Exact part number match RAW00158/A helps avoid misfit brackets and rework.

9. Trusted Sourcing: Fitment validated against Royal Enfield price list and multiple international dealer listings for Bullet 350.

Compatibility Table

✅ Only models with confirmed fitment are listed. Other UCE/J-series/Thunderbird/Classic models use different side-stand mounting part numbers (e.g. 866255, 890138, 594122/B, etc.) and are not included to avoid returns.

CHECK PART NUMBER BEFORE PURCHASE 

*Years/BS-stage are approximate based on Bullet 350 UCE production; always verify with your frame’s parts catalog or existing bracket stamping.

Variants

• Finish: Black (standard OEM finish)

• Configuration: Single standard variant – mounting bracket assembly only (side stand, spring, switch and hardware sold separately unless otherwise mentioned in product photos/description).

FAQs 

Q1. Will RAW00158/A fit my Classic 350 or Classic 500 UCE?
Probably not. Classic models commonly use different side stand mounting part numbers (e.g., 801574/866255/890138 depending on year and market). RAW00158/A is specifically listed for Bullet 350 in dealer listings. Please check your existing bracket’s part number or consult a Royal Enfield dealer before ordering.

Q2. What should I check before buying this bracket?
Confirm that your current side stand mount has RAW00158 or RAW00158/A stamped/printed on it, or verify via the official Royal Enfield parts catalog for your VIN/model. If the catalog shows a different number, this bracket may not fit correctly.

Q3. Does this include the actual side stand and spring?
In most cases this part number refers to the mounting bracket assembly only. Side stand, spring, rubber stopper and side-stand switch (if equipped) are separate parts. Please refer to product photos and “What’s Included” section on the page before ordering.

Q4. My bike leans too much on the side stand. Will changing only the stand help?
If the mounting bracket itself is bent or cracked, changing only the stand will not fully solve the issue. Replacing the bracket with a genuine RAW00158/A restores the original geometry so that a new side stand can work correctly.

Q5. Is this suitable for modified or lowered Bullets?
This is designed around the stock Bullet 350 UCE frame height. It will still work on mildly modified bikes, but if the frame height or suspension travel has been changed significantly, the lean angle may differ.