Royal Enfield Rear Black Engine Mounting Plate – 801529 | Classic 500 / Bullet 500 / Electra EFI

Genuine rear engine-mounting plate used on supported UCE-era frames; exact quantity and LH/RH position must be checked from the motorcycle diagram.

For the best fitment accuracy, order this spare by the exact Royal Enfield part number and motorcycle parts catalogue—not by appearance alone. This page includes model-generation checks, similar-part differences and workshop notes to reduce incorrect orders.

Part Identification

Detailed Product Description

801529 is catalogued as ENGINE MTG. PLATE REAR BLACK / ENGINE MOUNTING PLATE, REAR. It appears in frame and ABS-frame diagrams for supported Classic 500 and Bullet 500 variants, and in Electra EFI frame documentation where two rear mounting plates are used.

This is a structural engine-support component, not decorative trim. Correct plate geometry, thickness, bolt alignment and mounting position matter for keeping the engine correctly located in the chassis.

There is a genuine catalogue nuance that matters for buyers: some frame catalogues show 801529 as a rear plate with quantity 2, while other model diagrams distinguish a rear RH plate position alongside another rear assembly. Because catalogue naming/position differs by model, this listing does not make a universal LH/RH claim. Match the exact diagram and required quantity for the motorcycle.

What This Product Is

• Genuine Royal Enfield rear engine mounting plate.
• Exact unsuffixed part number 801529.
• Black rear mounting-plate specification in supported applications.
• Structural frame/engine support hardware.

What This Product Is Not

• Not the frame itself.
• Not the front LH engine mounting plate 801527.
• Not the front RH engine mounting plate 801528.
• Not automatically a single dedicated RH or LH plate across every model; catalogue position/quantity varies.
• Not for J-Series frames by assumption.

Key Features

• Confirmed in Classic 500 and Bullet 500 frame/ABS-mounting diagrams.
• Also appears in Electra EFI frame documentation.
• Exact-part-number listing avoids confusion with colour-specific rear mounting plates.
• Structural-installation warnings included for workshop safety.

Buyer Search Names / Internal Search Keywords

Royal Enfield, Genuine Royal Enfield Parts, 801529, Rear Engine Mounting Plate, Engine Mount Plate, Rear Engine Bracket, Classic 500, Bullet 500, Electra EFI, UCE Engine Mount, Black Engine Mounting Plate

Confirmed / Best-Supported Compatibility

Fitment Not Confirmed / Check Before Ordering

Not Compatible / Do Not Order For

• Classic 350 Reborn / Bullet 350 J-Series
• Meteor 350 / Hunter 350
• Himalayan 450 / Guerrilla 450
• 650 Twin family unless exact catalogue lists 801529

Part Number / Supersession Notes

No later suffix was verified for 801529. Keep SKU and MPN exactly 801529. Side/quantity must come from the specific motorcycle diagram, not from the part number alone.

Similar Parts Comparison

When Should This Be Replaced?

Replace if the plate is bent from impact, cracked, elongated at bolt holes, heavily corroded, missing, or specified for replacement during frame/engine repair. Vibration or alignment issues should be diagnosed before assuming the plate alone is responsible.

Recommended Related Parts to Check

Inspect all engine mounting bolts, washers, nyloc nuts, the opposite rear plate/side-specific plate where fitted, front mounting plates, frame lugs and engine crankcase mounting points.

What's in the Box?

1 × Genuine Royal Enfield Rear Engine Mounting Plate – 801529. Order the quantity shown for your exact motorcycle; some applications use two.

Installation Notes

Engine mounting is structural and safety-critical. Support the engine correctly before removing mount hardware, never force misaligned holes, inspect the frame and crankcase lugs, and tighten fasteners in the correct sequence/torque. Confirm whether the motorcycle diagram requires one or two 801529 plates.

Return-Prevention Note

Please confirm 801529 before ordering. Match the part number, motorcycle model/generation, year/variant, side/colour/connector or engine specification as applicable. Correctly supplied spare parts are not returnable, exchangeable or refundable for wrong selection, incorrect diagnosis, fitment mismatch, mechanic recommendation or change of mind. Orders are non-cancellable once placed. For eligible wrong/damaged/missing-item claims, keep the complete parcel and provide a full unboxing video within 24 hours as required by store policy.

Frequently Asked Questions

What is 801529?
A genuine Royal Enfield rear engine mounting plate, commonly described as rear black engine mount plate.

Is 801529 LH or RH?
Do not apply one universal side label. Some diagrams show quantity 2, while some later model diagrams distinguish a separate RH rear plate. Match your exact frame diagram.

How many do I need?
Some frame catalogues specify quantity 2. Order only after checking the motorcycle diagram.

Does it fit Classic 500?
Yes, multiple Classic 500 variants are confirmed.

Does it fit Bullet 500?
Yes, Euro 3 and Euro 4 applications are confirmed.

Does it fit Electra EFI?
Yes, Electra EFI frame documentation shows 801529 as the rear engine mounting plate.

Can I fit it to Classic 350 Reborn?
Do not. Reborn/J-Series is a different frame platform unless an exact EPC says otherwise.

Royal Enfield, Genuine Royal Enfield Parts, 801529, Rear Engine Mounting Plate, Engine Mount Plate, Rear Engine Bracket, Classic 500, Bullet 500, Electra EFI, UCE Engine Mount, Black Engine Mounting Plate

• Genuine Royal Enfield 801529 rear engine mounting plate / rear engine mount plate / black engine bracket
• Royal Enfield part 801529 ENGINE MTG. PLATE REAR BLACK / ENGINE MOUNTING PLATE, REAR
• rear engine mounting plate / rear engine mount plate / black engine bracket genuine Royal Enfield part number 801529
• Brand: Royal Enfield
• MPN: 801529
• Condition: New
• Product category: Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
• Custom product: False