Royal Enfield Rear Drive Chain (94 Pitch / 94 Link) for Bullet 350 4-Speed & Electra 4S (Kick Start) | 112011

⚠️ Fitment Check (Critical): Part 112011 is an OEM-type Rear Drive Chain commonly referenced as “CHAIN, REAR / CHAIN|REAR / Rear Chain – 94 Pitch”. It is intended for older 350cc Bullet / 4-speed-era applications.
Before ordering, confirm your bike is a 4-Speed Bullet/Electra 4S (Kick Start) and that your chain spec matches 94 pitch/94 link.

Product Description 

Royal Enfield 112011 is the Rear Drive Chain (CHAIN, REAR) used on specific older Royal Enfield 350cc platforms. Dealer microfiche listings identify 112011 as “CHAIN, REAR” and confirm it as a genuine Royal Enfield spare reference. 

This chain is commonly referenced as a 94 pitch (94 link) rear chain, which is the standard format used on Indian-built 350cc Bullets in the classic 4-speed era (typically paired with the 13–16T gearbox sprocket range).
If your current chain shows tight spots, excessive slack adjustments, noisy drive, or uneven sprocket wear, replacing the chain restores smoother power delivery and helps protect the gearbox and rear sprocket from accelerated wear.

Compared to generic aftermarket chains that often vary in tolerance and stretching behaviour, an OEM-spec replacement helps maintain correct chain length, alignment, and durability for the intended drivetrain geometry. For best results, inspect sprockets and replace as a set if teeth are hooked or sharp.

Key Features 

• Genuine spare reference: Royal Enfield 112011 = CHAIN, REAR 

• Common specification: 94 pitch / 94 link rear chain (4-speed 350cc applications) 

• Also searched as: drive chain / main chain / rear chain / final drive chain 

• Suitable replacement for worn, stretched, noisy chains on verified models

• Helps restore smoother acceleration and reduce drivetrain lash

• Recommended to check sprockets—replace as a kit if sprockets are worn

• Typically supplied with a split link in similar 94-pitch rear chains (confirm in box) 

Compatibility Table(PLEASE CHECK PART NUMBER BEFORE PURCHASE)

Explicit exclusions (return prevention): Not confirmed for UCE 5-speed, Classic 350/500 UCE, J-Series, Meteor/Hunter, Himalayan/Scram, or 650 Twins under part 112011—do not order for those unless your official parts lookup maps to 112011. 

Variants

• Single part number: 112011 (Rear chain, 94 pitch)

• No LH/RH variant

FAQs 

Q1. What exactly is 112011 in Royal Enfield parts?
It is listed as “CHAIN, REAR / CHAIN|REAR”—the rear/final drive chain. 

Q2. Is this chain 94 pitch / 94 link?
Yes, it is commonly referenced as a 94 pitch rear chain for older 350cc Bullet 4-speed applications. 

Q3. Will this fit my Classic 350 Reborn / Meteor / Hunter / Himalayan?
No verified fitment exists for those models for part 112011. Order only if your official parts lookup confirms the same part number. 

Q4. Should I change sprockets also?
If sprocket teeth are hooked/sharp or the kit is old, replacing chain + sprockets together prevents premature new chain wear.

Q5. How can I confirm before ordering?
Count links / confirm 94 pitch and ensure your bike is Bullet 350 4-speed / Electra 4S-KS type as per dealer mapping.