Royal Enfield Rear Mudguard Logo Sticker - 590293/B - Genuine OEM

Product Introduction

Royal Enfield 590293/B is the genuine rear mudguard logo sticker, also described in parts data as RMG Sticker Classic. It replaces a missing, faded, peeling or damaged logo on the matching motorcycle application.

This listing supplies one logo sticker. Confirm the exact part reference and intended artwork before ordering, particularly on special-edition, repainted or replacement mudguards. A logo decal and a complete mudguard graphics set are separate products.

Part Identification

What This Product Is

An individual replacement Royal Enfield logo sticker under exact reference 590293/B. It is a cosmetic identification decal for the matching position. The rear mudguard, carrier, lamp and other bodywork remain separate components.

What This Product Is Not

• Not a complete rear mudguard or mudguard assembly with factory-applied graphics.
• Not the long rear mudguard pinstripe, full fender graphic or complete motorcycle sticker set.
• Not a fuel-tank badge, toolbox decal, air-filter-box sticker or raised metal emblem.
• Not a pair, multi-piece restoration kit or universal model-specific graphics package.

Key Features

• Genuine Royal Enfield part reference 590293/B.
• Individual rear mudguard logo replacement.
• Documented replacement reference for older sticker 591180/A.
• Useful for restoring the logo after repainting or replacing a worn decal, where this exact artwork is required.
• One piece supplied; matching other body graphics requires separate selection.

Buyer Search Names

Royal Enfield rear mudguard logo sticker, rear fender logo decal, RMG sticker Classic, Classic rear mudguard logo, Royal Enfield logo transfer, 590293/B, 590293B, replacement for 591180/A.

Confirmed Compatibility

These are documented applications, not a blanket all-years claim. Use the VIN-specific EPC and the original sticker reference when the motorcycle has variant-specific graphics.

Fitment Requires Verification

Not Compatible / Do Not Order For

• Do not order this logo sticker when the required item is a complete pinstripe or full mudguard graphic. Desert Storm and other special artwork may require a separate reference.
• Classic 350 UCE evidence does not establish factory-correct fitment for Classic Reborn/J-Series, new Bullet 350 J-Series, Meteor 350, Hunter 350 or Goan Classic 350.
• No factory application is established here for Interceptor/Continental GT/Bear/Super Meteor/Shotgun/Classic 650, Himalayan 411/450, Scram, Guerrilla or Continental GT 535.
• A decal may adhere to other suitable surfaces, but that does not establish the correct factory artwork, size or model application.
• Do not substitute a front mudguard decal, tank badge or toolbox sticker solely because it carries the Royal Enfield name.

Part Number / Revision / Supersession Notes

Order 590293/B with the /B suffix intact. Dealer parts data explicitly identifies 590293/B as the replacement for 591180/A. That documented relationship does not prove that every other 590293 suffix or every rear mudguard decal is interchangeable.

Older 590293/A references and unsuffixed 590293 seller listings are useful identification leads, but require an exact current-parts check. Do not treat a different graphics part number as an automatic substitute.

Artwork and Colour Selection

Check the actual supplied sticker photograph and packet label together. Lettering colour, outline, background, proportions and placement affect the finished appearance. Packaging, backing paper and protective carrier layers are not necessarily part of the finished visible design.

This is one exact SKU, not a choice of paint colours. A different motorcycle colour does not by itself prove physical incompatibility; confirm whether the intended factory artwork is the same. No unverified dimensions, reflective finish, UV resistance or waterproof rating is promised.

Similar Parts Comparison

When Should This Part Be Replaced?

Replace when the original logo is missing, visibly faded, torn, scratched or lifting at the edges, or when repainting requires a new decal. Inspect the surface before replacing it: corrosion, loose paint, wax, silicone residue or moisture can prevent satisfactory adhesion.

A sticker does not repair rust, dents, cracks, damaged paint or a loose mudguard. Correct the underlying surface or mounting problem first.

Recommended Related Parts to Check

• Rear mudguard paint and surface condition.
• Matching mudguard pinstripes or larger graphics if separately damaged.
• Rear mudguard, carrier, number-plate holder and tail-lamp mountings when doing bodywork repairs.
• Correct logo position and alignment using the original decal or model-specific reference.
• Separate decals needed for a complete repaint or restoration; they are not included here.

What’s in the Box

1 × Genuine Royal Enfield rear mudguard logo sticker, part number 590293/B.

No mudguard, carrier, tank badge, toolbox sticker, separate pinstripe set, application tools, cleaner or additional adhesive is included. This listing is for one individual sticker, not a pair or a complete graphics kit.

Installation Notes

Compare the new sticker, packet reference, outline and intended position before removing any backing or protective layers. Photograph or mark the old position before removal. For a repainted panel, wait until the paint has fully cured in accordance with the paint supplier’s instructions.

Prepare a clean, dry, sound and cool surface. Remove old adhesive carefully with a paint-compatible method; test cleaners discreetly and avoid harsh solvents. Align the decal before application and follow any supplied application instructions. Do not assume a wet-application method or add glue without manufacturer guidance.

Avoid stretching the artwork, trapping dirt or bubbles, or using excessive heat. Have an experienced bodywork/decal installer apply it if alignment or surface preparation is uncertain. Follow the supplied adhesive-care guidance before washing; no unverified curing time is specified.

Before You Buy / UTH Order and Return Policy

Confirm exact SKU 590293/B, intended decal position, artwork, required quantity and model generation before ordering. For Bullet/Electra applications or a different suffix in the old catalogue, check the current VIN-specific EPC. Keep the backing intact until selection is confirmed.

Order cancellation is not available once processing has started. Correctly supplied spare parts are generally not returnable for wrong selection, incorrect diagnosis, mechanic recommendation, fitment mismatch or change of mind. Wrong-item, damaged-item or missing-item claims require a complete unboxing video and must be raised within 24 hours of delivery. Retain the part label and packaging for any claim.

Frequently Asked Questions

What is 590293/B?

It is the genuine Royal Enfield rear mudguard logo sticker, also called RMG Sticker Classic.

How many stickers are supplied?

One individual logo sticker. It is not a pair or full graphics kit.

Is a rear mudguard included?

No. The mudguard, carrier, lamps and other bodywork are separate.

Is this the complete long mudguard stripe?

No. This is the logo sticker; complete stripes and larger graphics require their own part references.

Does it replace 591180/A?

Yes. Dealer parts data explicitly gives 590293/B as the replacement for 591180/A.

Is 590293/A automatically the same as /B?

No automatic interchange is claimed. Confirm the current replacement through the VIN-specific EPC or dealer parts data.

Which Classic generation is documented?

The confirmed rear mudguard applications are older Classic 350 UCE and Classic 500 EFI/UCE. This does not establish Classic Reborn/J-Series fitment.

Can I order it for a Bullet or Electra?

Base-reference retailer data includes Bullet 350 UCE KS/ES, Bullet 500 UCE and Electra 350 UCE ES. Confirm the exact /B revision and artwork first.

Will it suit every paint colour?

Check the intended logo design. Physical application and factory-correct appearance are separate checks; special editions may specify different graphics.

What are the dimensions and material?

Verified measurements and material grade are not available for this listing. Confirm the supplied sticker against the intended area before application.

Can it be applied over rust or peeling paint?

No sound result should be expected on an unstable surface. Repair corrosion or paint damage and prepare a clean, dry surface first.

Will this repair a damaged mudguard?

No. It replaces the logo appearance only; structural damage, loose mountings and damaged paint need separate attention.

SEO / Search Terms

Royal Enfield 590293/B rear mudguard logo sticker; 590293B genuine decal; RMG sticker Classic; Classic 350 UCE rear fender logo; Classic 500 EFI mudguard logo replacement; 591180/A replacement sticker.

Image Filename Suggestions

• royal-enfield-590293b-rear-mudguard-logo-sticker.jpg
• royal-enfield-590293b-logo-artwork-close-up.jpg
• royal-enfield-590293b-genuine-packet-label.jpg

Image Alt Text Suggestions

• Genuine Royal Enfield 590293/B rear mudguard logo sticker, one piece.
• Close-up of the supplied Royal Enfield 590293/B logo artwork.
• Royal Enfield packet label showing exact part number 590293/B.

Use only with matching photographs of the actual supplied sticker and packet.

Google Shopping Notes